Nails, Screws, Fasteners DeWALT

DeWALT Steel Perfoband Strapping 12mm 10m DDF6755004

Part of a range of clips, washers and ties that has been specifically designed for a wide veriety of on-site applications including the fixing of cable conduit, lathing, steel brackets and wooden batt more→ens. Specifications • Catalogue Number: DDF6755004 • Description: Perfoband x 10 metres • Diameter: 12mm • Fits DCN80: yes

DeWALT Steel Perfoband Strapping 17mm 10m DDF6755005

from £6.49

Compare prices₃→

Part of a range of clips, washers and ties that has been specifically designed for a wide veriety of on-site applications including the fixing of cable conduit, lathing, steel brackets and wooden batt more→ens. Specifications • Catalogue Number: DDF6755005 • Description: Perfoband x 10 metres • Diameter: 17mm • Fits DCN80: yes

DeWALT PV-45 PRO Syrene Free Chemical Anchor Cartridge 300ml DFC1320000

from £10.95

Compare prices₃→

The DeWalt adhesive anchors range offers high performance, stress free fixing into brickwork, block work and concrete Best suited for high load applications, the resulting bond between stud and resin more→is often stronger than the base material itself. The low expansion and splitting forces when the anchor is prestressed or loaded allow small edge distances and spacings This makes them ideal for close to edge fixing, close spacing and use in concrete of unknown quality or low compressive strength Each DeWalt adhesive anchor is specifically formulated to provide a unique set of properties to suit various applications. Load capacities will depend on base material strength and integrity, stud or rebar …

DeWALT DSTSX30Z 18G Galvanised 30mm DEWDSTSX30Z (Pack 3000)

from £11.95 up to £11.99

Compare prices₄→

These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and floori more→ng contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins. 1 x Pack of 5000 DEWALT DSTSX30Z 18G Galvanised Staples 30mm

DeWALT BT Pins DNBT1815GZ 18 GA Galvanized Compression Head Type 0 Wire Si

from £11.39 up to £17.84

Compare prices₅→

Suitable for DEWALT machines: DC602, DC608, DPN1850PP
Original DEWALT accessory
Box contents: 5000 x 0° compression head nail with wire size 1.25 x 1.0 mm, length 15 mm, galvanised

DeWALT 16 Gauge Finishing Nails Galvanized 32mm Pack of 2500 DNBSB1632Z

from £12.95

Compare prices₃→

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure relia more→bility in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 32mm • Finish: Galvanised • Pack Quantity: 2500

DeWALT DSTSX35Z 18G Galvanised 35mm DEWDSTSX35Z (Pack 3000)

from £12.99 up to £13.95

Compare prices₄→

These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and floori more→ng contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins. 1 x Pack of 5000 DEWALT DSTSX35Z 18G Galvanised Staples 35mm

DeWALT 18 Gauge Brad Nail Galvanized 20mm Pack of 5000 DNBT1820GZ

from £13.95

Compare prices₃→

Galvanized brad nails. Specifications • Catalogue Number: DNBT1820GZ • Description: Galvanized 18 Gauge brad nails • Diameter: 1.25mm • Length: 20mm • Finish: Galvanized &bull more→; Quantity: Box of 5000 • Compatible with: DPN1850, DC608

DeWALT DSTSX12Z 18G Galvanised 12mm DEWDSTSX12Z (Pack 5000)

from £9.58 up to £13.95

Compare prices₅→

These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and floori more→ng contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins. 1 x Pack of 5000 DEWALT DSTSX12Z 18G Galvanised Staples 12mm

DeWALT DSTSX15Z 18G Galvanised 15mm DEWDSTSX15Z (Pack 5000)

from £13.99 up to £14.95

Compare prices₄→

These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and floori more→ng contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins. 1 x Pack of 5000 DEWALT DSTSX15Z 18G Galvanised Staples 15mm

DeWALT 16 Gauge Finishing Nails Galvanized 38mm Pack of 2500 DNBSB1638Z

from £14.95

Compare prices₃→

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure relia more→bility in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 38mm • Finish: Galvanised • Pack Quantity: 2500

DeWALT AC100-PRO Syrene Free Chemical Anchor Cartridge 410ml DFC1230000

from £15.95

Compare prices₃→

The AC100-PRO is a two-component vinylester adhesive anchor and is approved for almost all applications and base materials. It provides consistent performance in uncracked and cracked concrete with a more→wide range of hole diameters and embedment depths as well as flexible fixture thicknesses and a simple installation process. The AC100-PRO is approved for a temperature range of up to 120°C and can even be used in water filled holes. It also provides a fast curing time and high load capacity making it the ideal adhesive anchor for use on-site. Features & Benefits • ETAG 001 approved (ETA Option 1) for use in cracked and uncracked concrete • Approved for water filled drill holes (Option …

DeWALT DSTSX19Z 18G Galvanised 19mm DEWDSTSX19Z (Pack 5000)

from £15.95 up to £16.99

Compare prices₄→

These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and floori more→ng contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins. 1 x Pack of 5000 DEWALT DSTSX19Z 18G Galvanised Staples 19mm

DeWALT 18 Gauge Brad Nail Galvanized 25mm Pack of 5000 DNBT1825GZ

from £15.95

Compare prices₃→

Galvanized brad nails. Specifications • Catalogue Number: DNTB1825GZ • Description: Galvanized 18 Gauge brad nails • Diameter: 1.25mm • Length: 25mm • Finish: Galvanized &bull more→; Quantity: Box of 5000 • Compatible with: DPN1850, DC608

DeWALT DRS18100 Insulated Crown Cable For DCN701 DRS18100-XJ

from £15.95 up to £21.99

Compare prices₆→

Dewalt DRS18100 Insulated Crown Cable Staples For DCN701 25mm (Pack Of 540) The Dewalt DRS18100 staples are designed to be used in conjunction with the DCN701 for fastening low voltage wires. They ar more→e plastic insulated and extremely user-friendly as they can also be manually driven with a hammer into tight, hard to reach areas. Features:
- Designed for use in the Dewalt DCN701 cordless cable stapler
- They are UL listed (406A) for common Romex (NM Sheathed Cable), and MC (Metal Clad) cable applications
- The staple crown is plastic insulated and they adhere to the National Electrical Code
- Can also be driven manually using a hammer for tight space applications
- Also suitable for u…

DeWALT AC100-PRO Syrene Free Chemical Anchor Cartridge 300ml DFC1230050

from £16.95

Compare prices₃→

The AC100-PRO is a two-component vinylester adhesive anchor and is approved for almost all applications and base materials. It provides consistent performance in uncracked and cracked concrete with a more→wide range of hole diameters and embedment depths as well as flexible fixture thicknesses and a simple installation process. The AC100-PRO is approved for a temperature range of up to 120°C and can even be used in water filled holes. It also provides a fast curing time and high load capacity making it the ideal adhesive anchor for use on-site. Features & Benefits • ETAG 001 approved (ETA Option 1) for use in cracked and uncracked concrete • Approved for water filled drill holes (Option …

DeWALT 16 Gauge Finishing Nails Galvanized 45mm Pack of 2500 DNBSB1645Z

from £16.95

Compare prices₃→

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure relia more→bility in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 45mm • Finish: Galvanised • Pack Quantity: 2500

DeWALT DSTSX22Z 18G Galvanised 22mm DEWDSTSX22Z (Pack 5000)

from £15.99 up to £17.95

Compare prices₄→

These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and floori more→ng contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins. 1 x Pack of 5000 DEWALT DSTSX22Z 18G Galvanised Staples 22mm

DeWALT 18 Gauge Brad Nail Galvanized 30mm Pack of 5000 DNBT1830GZ

from £18.95

Compare prices₃→

Galvanized brad nails. Specifications • Catalogue Number: DNBT1830GZ • Description: Galvanized 18 Gauge Brad Nails • Diameter: 1.25mm • Length: 30mm • Finish: Galvanized &bull more→; Quantity: Box of 5000 • Compatible with: DPN1850, DC608

DeWALT SX5035 Galvanised Narrow Crown Finishing 25mm Pack of 3000

from £18.95

Compare prices₃→

Galvanised narrow crown finishing staples. Specifications • Catalogue Number: DSTSX25Z • Description: Galvanised SX Staple • Staple Crown Width: 5.6mm • Length: 25mm • Compati more→ble with: DPSX38 • Quantity: 500

DeWALT 16 Gauge Finishing Nails Galvanized 50mm Pack of 2500 DNBSB1650Z

from £18.95

Compare prices₃→

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure relia more→bility in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 50mm • Finish: Galvanised • Pack Quantity: 2500

DeWALT 16GA Brad Finish Nail 20 Deg Galvanised 32mm DNBA163 (Pack of 2500)

from £19.00 up to £21.95

Compare prices₄→

Dewalt DNBA1632-GZ 16GA Brad Finish Nail 20 Deg Galvanised 32mm (Pack of 2500) The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailers, ensuring few more→er jamming or fitment issues. Features:
- Galvanised nails reduce the likelihood of rust or staining
- High quality steel to ensure reliability in performance
- Contains 2500 angle brad nails Specification:
- Gauge: 1.6 (16GA)
- Box Quantity: 2500
- Length: 32mm
- Type: 20° Angled Nails
- Finish: Galvanised
- Weight: 1.5kg

DeWALT 18 Gauge Brad Nail Galvanized 35mm Pack of 5000 DNBT1835GZ

from £19.95

Compare prices₃→

Galvanized brad nails. Specifications • Catalogue Number: DNBT1835GZ • Description: Galvanized 18 Gauge Brad Nails • Diameter: 1.25mm • Length: 35mm • Finish: Galvanized &bull more→; Quantity: Box of 5000 • Compatible with: DPN1850, DC608

DeWALT 16 Gauge Finishing Nails Galvanized 57mm Pack of 2500 DNBSB1657Z

from £19.95

Compare prices₃→

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure relia more→bility in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 57mm • Finish: Galvanised • Pack Quantity: 2500