Diving Accessories Dive Rite

Trachea for 30cm (12) wing includes elbow and inflator button

The Dive Rite Oxygen Decompression Regulator is a compact, lightweight option for a deco regulator. Assembled in a clean room using all oxygen compatible materials and lubricants, this shallow water deco regulator can be used with higher concentrations of oxygen without the need for additional preparation.An unbalanced piston DIN first stage gives ideal performance for a shallow water regulator. An OPV on the first stage provides an additional margin of safety in the event of a first stage failure. A single HP port is used for a 1 diameter button guage.The XT2 second stage is a pneumatically balanced second stage with Venturi assist to provide a consistent gas pressure delivery for smooth inhalation.…

Dive Rite cam straps are available in several options. No matter what the application is, Dive Rite has a cam strap that will work for it. All cam straps are sold individually, and are made in the USA.The low-profile, 1.5 inch cam strap (BC2036-1.5) is a popular option for rigging sidemount or stage bottles. Using a low profile marine grade stainless steel roller cam buckle, the 1.5 inch wide strap is 36 inches (91.4cm) in length and is user adjustable to fit cylinders from 5 inches in diameter up to 8 inches (20.3cm) in diameter. Rubber non-slip pad prevents the cylinder from shifting once the cam strap is secured. Excess webbing is secures using hook-and-loop, which will also prevent the

wing valve,size 16

Travel And Voyager 210 LAM inner Bladder.

This versatile pocket holds up to 4lbs of weight, which is ideal for those traveling to warm water destinations or divers who add weight to tanks for trim purposes.With a small footprint of 3 inches x 4 inches (7.6cm x 10cm), you´ll hardly know it´s there.With two mounting options in one pocket, the Travel Weight Pocket is extremely versatile.A 2 inch velcro attachment allows for easy installation or removal.The 2 inch stainless slide can be used for a more permanent attachment.The locking slide attachment is also ideal for use on basic style webbing harnesses, where there is nothing to keep a pocket from sliding around.Sold individually.1680 denier ballistic nylon fabric is tear and abrasion re…

Our Sidemount Rigging Kit comes with everything a diver needs to correctly set up a minimalist loop bungee sidemount system.This works great to set your bottles up for the Dive Rite Nomad Ray!.Rugged EPDM rubber hose retainer band resists rolling and tearing and has the right amount of stretch.A large webbing loop on the retainer is easy to grip even with gloves on.Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion.The stainless steel cylinder clamp uses a unique ´´speed´´ worm gear, which allows the diver to quickly adjust the clamp with less effort.A 3/4-inch piece of tubular webbing covers the tank clamp and a 1.5-inch nylon

The Dive Rite Adjustable Bungee System (ABS) allows fast and easy customization to fit any sidemount diver. The bungee cord is weaved through a custom designed, laser cut Delrin plate providing an infinitely adjustable bungee. The bungee will support even the heaviest of steel tanks without slipping thanks to the unique weaving pattern. There are no knots to tie and no tools are required--just loosen the weave at the plate, adjust to the correct length, and re-tighten. Make quick work of fine tuning your sidemount system and easily adjust for different sized tanks or varying thicknesses of exposure protection. They are also ideal for instructors and rental programs that need to quickly size …

The stainless steel assembly screws are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems and sidemount buttplates).Another common use is to secure the wing to the TransPac harness or hard backplate when rigged for a single tank--When the BCD is taken off a single tank (perhaps to swap tanks between dives), the cam straps alone are not enough to keep the wing neatly attached to the harness.Designed to fit through a 3/8 hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place.Sold as a set of two.

The Backplate Comfort Pads high-tech design consists of molded foam contoured in all the right places to prevent uncomfortable pokes and prods when wearing a metal backplate. Mesh airflow channels provide instant draining topside and resist compression allowing the pad to maintain its thickness and comfort at depth. Using Velcro straps to secure to the shoulders of a harness, the Backplate Comfort Pad can be easily added or removed without the need to disassemble the harness. It will fit any standard backplate or harness. Made in the U.S.A.Features:- Constructed of 1000 denier ballistic nylon for maximum tear and abrasion resistance- Quick-dry foam padding with an open-cell porous design allows …

he next generation of lightweight backplates has arrived. Dive Rite has taken the reliability of the stainless steel backplate and combined it with the light weight characteristics of non-stainless steel backplates. The new Dive Rite XT Lite is constructed from 16 guage 316L grade stainless steel, which is a low carbon, rust resistant grade of stainless. A series of cut-outs along the body of the plate reduce its overall weight while still maintaining the support needed for the heaviest of double cylinder configurations. All edges are laser cut, and individually finished by hand to ensure that there are no rough or jagged edges anywhere on the plate.The XT Lite backplate is configures with 11´ o…

Based on the original Dive Rite backplates produced since 1984, the XT Backplate design has evolved to include new features and ergonomics for the modern diver. Laser cut from 10 gauge low carbon, rust resistant 316L stainless steel, the unique shape contours the diver's back while generously rounded corners prevent the plate from digging in or damaging exposure suits. All XT plates are individually finished by hand guaranteeing there are no rough or sharp edges that could potentially damage harness webbing. They are then electropolished to a mirror finish and laser engraved to ensure that they look as good as they perform.The XT backplate is set up with 11´´ (27.9cm) on-center mounting

The XT Lite backplate design is based on the original Dive Rite backplates produced since 1984.The lightweight design has evolved to include new features and ergonomics for the modern diver.Laser cut from a thin 14 gauge low carbon, rust resistant 316L stainless steel, the unique shape contours the diver´s back while generously rounded corners prevent the plate from digging in or damaging exposure suits.Additional internal cutouts further reduce weight and add to the plate´s unique look while still maintaining the support needed for the heaviest double cylinder configurations.All XT Lite plates are CNC deburred guaranteeing there are no rough or sharp edges that could potentially damage

Embraced by DIR purists who prefer a streamlined rig without buckles, chest strap or padding, the Basic Harness is a clean, simple harness intended for use with hard metal backplates.MIL-SPEC polypropylene webbing provides strength, yet is soft and wont dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature.Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver.Tubular webbing sleeves are included for all points where webbing comes into contact with the backplate to prevent abrasion.Includes marine-grade stainless steel hardware.…

Protect your exposure suit and pad your shoulders with our basic webbing harness shoulder pads.Neoprene sleeves weave onto any 2-inch webbing harness prior to full assemblyMade in the U.S.A.

Bcd Jackets Accessories And Parts Kit X 10 Stainless Steel D-Ring Bent Low Profile 5Cm.

Quickly set up stage, deco, or sidemount bottles without tools using our Travel Stage Straps. Two hose retainers (one deluxe, and one standard) and the 1.5 inch low profile cam strap are captured in the stage strap, keeping the entire set up connected as one piece. Adding and removing this kit from cylinders is easy, and losing pieces from the kit is nearly impossible. Use of a cam strap instead of a metal clamp allows divers to quickly set up, adjust or remove the straps. Marine grade stainless steel medium bolt snaps are used as a lighter weight option for travel purposes.Choice of GM2049-TS-7 for 7-inch diameter tanks or GM2049-TS-5 for 5-inch diameter tanks. All versions come with a tank

Inner bladder for Rec & Classic EXP wings.

The Dive Rite Classic Wing has stood the test of time as the first aircell designed specifically for use with large double cylinders.With 55 lbs of lift, the Classic Wing was designed to carry double steel 104´s with multiple stage bottles and other accessories.Using a horseshoe design, divers can target lift where it´s needed to balance out their rig and stay in trim.Compared to the original ``Doubles Wing´´ released in 1985, today´s Classic version has an enhanced construction using a premium 1000 denier ballistic nylon outerbag and a heavy duty 210 nylon laminated inner bladder.The solid center panel features two sets of 316 stainless steel grommets for mounting so a diver can tweak the w…

The Compact SPG is a great alternative for divers that want a lightweight SPG for traveling, sidemount bottles, or stage bottles.A polycarbonate face and a nickel plated brass body reduce the weight of the Compact SPG by 43% compared to our Mini Tech SPG.A clean, black and white face means the Compact SPG is easy to read.This naked gauge has a 1.75-inch (44.5 mm) diameter with a 1.5-inch (38 mm) face (RG 2740-NH).A Bourdon tube gauge, the Compact SPG is calibrated to 5000 PSI in 100 PSI increments (360 Bar in 10 Bar increments) for the highest level of accuracy.A luminescent dial makes it easier to read in low light situations.Comes standard as a naked SPG with a spool to attach a hose

All Dive Rite wings come with the option of a 12-inch, 16-inch or 22-inch corrugated inflation hose with elbow or a 16-inch corrugated inflation hose with rapid exhaust (pull dump). A 12-inch rapid exhaust hose is available on request. Occasionally, divers find that they need to change the hose on their aircell for a different dive application. Divers who wear double back mounted tanks often prefer hoses with a low profile elbow that doesnt interfere with a regulator connection to the tank manifold. Many times, coldwater divers desire the longer 16-inch hose to reach past bulky exposure protection. Warm water divers frequently select the shorter 12-inch hose, unless they are large in

12´´ corrugated hose for Dive Rite wings.

Techincal Scuba Diving Oval Inflator Assembly System come with 22(L) Oval shape corrugated hose, K-shape power inflator and plain elbow (non-exhaust elbow).This inflator system is made of durable impact resistant plastic and rubber corrugated hose.The internal components of the power inflator and inlet quick-disconnect nipple are made from marine chrome plated brass.Our inflator assembly is fit for the technical wings (air cells) which using the thread size (inner diameter) of elbow collar is 46mm.

Preferred by divers who use scooters (DPVs) for extended periods of time due to the added comfort the 2-inch width provides.Used for fastening a harness and backplate securely to a divers body, the 2-inch crotch strap is used to reduce the likelihood of gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive.Continuous piece of nylon webbing provides strength, yet is soft and wont dig into the body.Includes a neoprene sleeve to protect exposure suit from abrasion.Made in the U.S.A.* Two-inch nylon webbing crotch strap has 2,800 lbs tensile strength and is 42-inches long.* Stainless steel 304 welded scooter ring for attaching scooter leash.…