Diving Accessories Dive Rite

All of the performance and reliability you have come to expect from our XT1 first stage regulators is now available in a sleek, fixed turret design. The FT1 is the perfect first stage for open water, sidemount, or rebreather use. Flat LP and HP ports allow hoses to run straight out from the side of the regulator for more streamlined hose routing. Simple and compact, the FT1 has work of breathing performance on par with the premier regulators on the market. Rugged construction and a new wear resistant Sn-Ni plating mean this regulator will continue to look as good as it performs no matter what you throw at it.Balanced first stage design maintains consistent IP and gas delivery regardless of

Dive Rite´s new premium the second stage offers reliable performance in demanding conditions and low work of breathing.The compact, lightweight XT4 uses a streamlined exhaust tee perfect for sidemount or stage bottle setup.An ergonomic knob provides fine-tuning of breathing resistance, and metal parts are coated against abrasion.

Dive Rite cam straps are available in several options.No matter what the application is, Dive Rite has a cam strap that will work for it.All cam straps are sold individually, and are made in the USA.The stainless steel cam strap with roller buckle (BC2035) uses a 2-inch wide nylon webbing with marine grade stainless steel buckle.36 inch (91.4cm) webbing length is suitable for cylinders from 6.9 inches (17.5cm) to 8 inches (20.3cm) in diameter, which includes them most popular sizes of cylinders.Nylon rollers on the cam strap protect the cylinder from being scratched by the buckle, while a rubber non-slip pad prevents the cylinder from shifting once the cam buckle has been secured.Excess

A compact version of our Surface Marking Device, the Seeme Float is often referred to as a ´safety sausage´. A Seeme Float is a must-have accessory for every open ocean diver in the event they are separated from the boat and are also helpful on drift dives or night dives. Fully closed, it inflates orally and includes a clear plastic holder for a chemical glow stick. At 44-inches long and 4-inches wide (112cm x 10cm), it secures easily in a pocket or can be clipped to a harness D-ring with the attached plastic clip.Features:- Oral inflation tube with one way valve. - Ultrasonically sealed seams.

Diving Weight Systems Accessories Kit X 10 Stainless Steel Serrated Fastener 5Cm.

Based on the original Dive Rite backplates produced since 1984, the XT Backplate design has evolved to include new features and ergonomics fit for the modern diver.Laser cut from 10 gauge low carbon, rust resistant 316 L stainless steel, this unique shape contours the diver´s back while generously rounded corners prevent the plate from digging in or damaging exposure suits.All XT plates are individually finished by hand, guaranteeing there are no rough or sharp edges that could potentially damage harness webbing.They are then electropolished to a mirror finish and laser engraved to ensure that they look as good as they perform.The XT backplate is set up with 11-inch (27.9 cm) on-center mounting h…

For divers who frequently switch between double tank and single tank rigs, our single tank adapter is a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots. Constructed of marine grade 304 stainless steel.Note: Singles Mounting Plate (SMP) does not include cam straps.1.1 lbs (17.6 oz)

Bcd Jackets Accessories And Parts Kit X 10 D-Ring Steel Sliding.

A clean, black and white face means the Tech SPG is easy-to-read. This naked gauge has a 2-inch diameter with a 1.75-inch face (RG2762).A Bourdon tube gauge, the Tech SPG is calibrated to 5000-psi in 100-psi increments (360-Bar in 10-Bar increments) for the highest level of accuracy. A tempered glass face is impact and scratch resistant, while the luminescent dial makes it easier to read in low light situations.Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. A boot is available as a separate option, if desired. The Tech SPG is suitable for oxygen service and is CE approved.

Rated To 5000 Psi In 1000 Psi Increments, Our 1-Inch Button Spg Is Ideal For Use With Pony, Argon And Bailout Bottles When All You Need Is An Indication Of Full Or Empty. A Color-Coded Scale Helps Ensure An Accurate Read. The Addition Of An Pressurization Valve Is An Important Safety Feature. Fits Standard, 7/16-Inch High Pressure Port Of Any First Stage Regulator. No Hose Required. Chrome Plated Brass With A Polycarbonate Face Resists Corrosion And Scratches.

Our Stage Bottle Rigging comes with everything a diver needs to correctly set up secondary bottles for years of technical diving. Our 1-inch (2.54 cm) nylon webbing with 2,200 lbs (998 kgs) tensile strength forms the carrying strap. Resistant to breakage, rot and splitting, nylon webbing creates a durable and long-lasting foundation for stage rigging, yet can be cut free in case of entanglement.Rugged EPDM rubber hose retainer band resists rolling and tearing and has the right amount of stretch. A large webbing loop on the retainer is easy to grip even with gloves on. Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion.The stainless steel

Dive Rites stainless steel XT backplate is one of the few backplates that is made in the USA. All Dive Rite backplates are laser cut and individually finished by hand. This attention to detail ensures that there will be no rough, jagged edges that could potentially damage harness or accessory webbing. The XT backplate uses an 11 gauge, low carbon and rust resistant 316L grade stainless steel. Weighing in at 5.2 lbs (2.4kg), stainless steel plates are a popular option for divers looking for a more even distribution of ballast weight.The XT backplate is set up with 11´ (27.9cm) on-center mounting holes to accommodate standard double tank bolt kits, including two holes for the upper bolt to

Dive Rite cam straps are 36-inches in length to accomodate 7.25-inch or 8-inch tanks. Our cam straps have marine-grade, stainless steel buckles that are strong, yet also lightweight. They include a sewn-in, non-slip pad to protect the tank from scratches.* 36-inches long - standard* 2-inch wide nylon* 7,000 lbs tensile strength* with Roller Stainless Steel buckle - unit

Bcd Jackets Accessories And Parts Kit X 10 Stainless Steel Ring Bent 1´25Cm.

Dive rite Steel Inox 3.80 cm Bent D-Ring 10 Units.

Bcd Jackets Accessories And Parts Kit X 10 Stainless Steel D-Ring 5Cm.

Accessories Snap Hooks And Extenders Kit X 10 Medium Stainless Steel Shackle 5Cm.

Bcd Jackets Accessories And Parts Kit X 10 Stainless Steel Rounded Ring 5Cm.

Bcd Jackets Accessories And Parts Kit X 10 Stainless Steel Transpac.Transpac Stainless Steel (Pair).

Rebreather divers and open circuit divers alike will appreciate our hybrid Surface Marker Tube. An oral/power inflator makes inflation simple for rebreather divers who do not have easy access to a regulator for inflation. Likewise, a funnel-shaped, anti-spill baffle allows open circuit divers to inflate this SMT with a regulator. A standard over pressurization valve allows excess gas to vent during ascent and/or to depressurize the bag at the surface. Built-in carrying sleeve. ANSI safety orange. Made in the U.S.A.Features:- 30 lbs lift.- Reflective tape on both sides for added visibility.- 300 D polyester bag is extra-tough and more resistant to fading.- Durable water repellant finish (DWR)

When sidemounting stage tanks or rebreather bailout bottles, buttplate rails can be difficult to access if backmounted gear covers them up. Problem solved with our new Tech Buttplate. Its rectangular shape places tank attachment points at the edge of the divers body, while outrigger hardware is easy to find due to its orientation facing outwards on the plate.Specifications:- Buttplate made of reinforced nylon to provide the proper amount of rigidity to hold tanks in position and eliminate sag.- Two stainless steel handles are used for tank attachment.- Includes two stainless steel assembly screws for securing buttplate to backplate.- Accommodates any size crotch strap- 1.3lbs (590g)

The titanium drop D-rings are designed to provide additional accessory clip points to the back of a sidemount harness. They are installed by simply weaving the waist webbing strap through the four vertical slots.The extended design “drops” the D-ring location approximately 3 inches below the waist belt allowing it to extend past the aircell. A 15 degree bend in the end of the ring makes it easy to clip into. Using a pair of drop D-rings is the perfect way to clip off an accessory butt pocket or extra spools and reels.Lightweight, all titanium construction makes them perfect for a travel BC while providing high strength and excellent corrosion resistance.Specifications:- SKU DR-HW1202-

Experienced divers all carry spares and tools.In fact o-rings and zip ties are often our best friends.Based on designs from the motorcycle industry, our tech tool bag has been specifically tailored to carry all the essentials to save a dive in a compact roll-up design.A separate zippered compartment makes sure o-rings, port plugs and other necessities pieces stay put.Throw one in your dive bag or suitcase and you´ll always have what you need to fix a leaky reg or tune up your rebreather on the fly.Note:tools and spares are not included.Made in the usa.1000 denier cordura.Silicon gripper inside stretch pockets.Zipper pocket for o-rings and small items.5.6 oz.9-in long x 6-in wide (22.5 cm x

Stainless Steel (pair)For double tanksThe stainless steel TransPac Stabilizing Plates firmly secure a TransPac to any set of double tanks that use industry-standard bands and bolts. They are curved to fit the spacing of double tanks, and are the only item needed to connect a TransPac harness and a wing to a set of double tanks (a hard backplate is not needed). The TransPac harness and the wing end up being sandwiched between the double tanks and the Stabilizing Plates, with the Stabilizing Plates functioning like large washers. Sold as a pair.