Diving Accessories Dive Rite

Backplate not included.A webbing harness designed for hard backplates that provides comfort and streamlining. Swivel points on the shoulder straps ensure a comfortable fit, which is especially important for women, as well as men with broad shoulders. A chest strap keeps the harness securely in place. Two-inch (50mm) nylon webbing provides strength, yet is soft and won´t dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature. Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver. Quick Release model also available (BC1080Q). …

For divers who frequently switch between double tank and single tank rigs, our single tank adapter is a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots. Constructed of marine grade 304 stainless steel.Note: Singles Mounting Plate (SMP) does not include cam straps.1.1 lbs (17.6 oz)

A webbing harness designed for hard backplates that provides comfort and streamlining.Swivel points on the shoulder straps ensure a comfortable fit, which is especially important for women and, also, men with broad shoulders.A chest strap keeps the harness in place. MIL-SPEC polypropylene webbing provides strength, yet is soft and wont dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature.Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver.Tubular webbing sleeves are included for all points where webbing will come into

Compatible with the Transpack XT the molded foam lumbar pad is contoured in all the right places with mesh airflow channels for instant draining topside.

Quickly set up stage, deco, or sidemount bottles without tools using our Travel Stage Straps. Two hose retainers (one deluxe, and one standard) and the 1.5 inch low profile cam strap are captured in the stage strap, keeping the entire set up connected as one piece. Adding and removing this kit from cylinders is easy, and losing pieces from the kit is nearly impossible. Use of a cam strap instead of a metal clamp allows divers to quickly set up, adjust or remove the straps. Marine grade stainless steel medium bolt snaps are used as a lighter weight option for travel purposes.Choice of GM2049-TS-7 for 7-inch diameter tanks or GM2049-TS-5 for 5-inch diameter tanks. All versions come with a tank

The Backplate Comfort Pads high-tech design consists of molded foam contoured in all the right places to prevent uncomfortable pokes and prods when wearing a metal backplate. Mesh airflow channels provide instant draining topside and resist compression allowing the pad to maintain its thickness and comfort at depth. Using Velcro straps to secure to the shoulders of a harness, the Backplate Comfort Pad can be easily added or removed without the need to disassemble the harness. It will fit any standard backplate or harness. Made in the U.S.A.Features:- Constructed of 1000 denier ballistic nylon for maximum tear and abrasion resistance- Quick-dry foam padding with an open-cell porous design allows …

Quickly set up stage, deco, or sidemount bottles without tools using our Travel Stage Straps.Two hose retainers (one deluxe, and one standard) and the 1.5 inch low profile cam strap are captured in the stage strap, keeping the entire set up connected as one piece.Adding and removing this kit from cylinders is easy, and losing pieces from the kit is nearly impossible.Use of a cam strap instead of a metal clamp allows divers to quickly set up, adjust or remove the straps.Marine grade stainless steel medium bolt snaps are used as a lighter weight option for travel purposes.Choice of GM2049-TS-7 for 7-inch diameter tanks or GM2049-TS-5 for 5-inch diameter tanks.All versions come with a tank choker …

Our Sidemount Rigging Kit comes with everything a diver needs to correctly set up a minimalist loop bungee sidemount system.This works great to set your bottles up for the Dive Rite Nomad Ray!.Rugged EPDM rubber hose retainer band resists rolling and tearing and has the right amount of stretch.A large webbing loop on the retainer is easy to grip even with gloves on.Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion.The stainless steel cylinder clamp uses a unique ´´speed´´ worm gear, which allows the diver to quickly adjust the clamp with less effort.A 3/4-inch piece of tubular webbing covers the tank clamp and a 1.5-inch nylon

Bcd Jackets Accessories And Parts Kit X 10 Offset D-Ring (Al).

The Compact SPG is a great alternative for divers that want a lightweight SPG for traveling, sidemount bottles, or stage bottles.A polycarbonate face and a nickel plated brass body reduce the weight of the Compact SPG by 43% compared to our Mini Tech SPG.A clean, black and white face means the Compact SPG is easy to read.This naked gauge has a 1.75-inch (44.5 mm) diameter with a 1.5-inch (38 mm) face (RG 2740-NH).A Bourdon tube gauge, the Compact SPG is calibrated to 5000 PSI in 100 PSI increments (360 Bar in 10 Bar increments) for the highest level of accuracy.A luminescent dial makes it easier to read in low light situations.Comes standard as a naked SPG with a spool to attach a hose

Travel Bladder 210 Lam.

Bcd Jackets Accessories And Parts Kit X 10 D-Ring Stainless Steel Low Profile 5Cm With Inclined Clamp.

Travel And Voyager 210 LAM inner Bladder.

Bcd Jackets Accessories And Parts Kit X 10 D-Ring Steel Sliding.

Inner bladder for Rec & Classic EXP wings.

he next generation of lightweight backplates has arrived. Dive Rite has taken the reliability of the stainless steel backplate and combined it with the light weight characteristics of non-stainless steel backplates. The new Dive Rite XT Lite is constructed from 16 guage 316L grade stainless steel, which is a low carbon, rust resistant grade of stainless. A series of cut-outs along the body of the plate reduce its overall weight while still maintaining the support needed for the heaviest of double cylinder configurations. All edges are laser cut, and individually finished by hand to ensure that there are no rough or jagged edges anywhere on the plate.The XT Lite backplate is configures with 11´ o…

A clean, black and white face means the Tech SPG is easy-to-read. This naked gauge has a 2-inch diameter with a 1.75-inch face (RG2762).A Bourdon tube gauge, the Tech SPG is calibrated to 5000-psi in 100-psi increments (360-Bar in 10-Bar increments) for the highest level of accuracy. A tempered glass face is impact and scratch resistant, while the luminescent dial makes it easier to read in low light situations.Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. A boot is available as a separate option, if desired. The Tech SPG is suitable for oxygen service and is CE approved.

The XT Lite backplate design is based on the original Dive Rite backplates produced since 1984.The lightweight design has evolved to include new features and ergonomics for the modern diver.Laser cut from a thin 14 gauge low carbon, rust resistant 316L stainless steel, the unique shape contours the diver´s back while generously rounded corners prevent the plate from digging in or damaging exposure suits.Additional internal cutouts further reduce weight and add to the plate´s unique look while still maintaining the support needed for the heaviest double cylinder configurations.All XT Lite plates are CNC deburred guaranteeing there are no rough or sharp edges that could potentially damage

The 32lb Quick Buckle (QB) Weight Pockets consist of an insert pocket that easily releases when the handle is pulled and a holster that stays securely on the waist belt. The insert pocket has two compartments to separate heavy weights and keep them from slipping inside. Designed to be worn with the TransPac harness, the 32lb QB Weight Pocket is worn vertically with each pocket holding up to 16 lbs. of weight securely in position throughout the dive. Simple, top-loading pocket protects divers from an inadvertent buoyancy event by keeping weight securely in place. Worn at an angle on the waist belt for easier access, the right hand pocket is identified by the Dive Rite logo while the left hand …

Transplate:A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate. Designed like a mountaineers backpack, the Transplate harness disperses weight across the hips and back, minimizing shoulder strain.When used with a 6-pound steel backplate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories. Available in sizes M to XXL. Made in the U.S.A.Please note: Stainless steel and/or aluminum backplate, and cam straps …

The Xt Regulator Welcomes A New Generation Of Regulator Performance At Dive Rite. An Elite Performer, The Xt´s Advance, Patented Design Earns Top Marks From Mike Ward Of Dive Lab. With Work Of Breathing At Less Than 1.0 J/L, The Xt Performs Right Alongside Premier Regulatorson The Market Today.Xt2 Second Stage Regulator:- Pneumatically Balanced Design Gives Consistent Gas Pressure For Easy Inhalation- Venturi Assist Directs Airflow From The Valve Directly To The Mouthpiece Producing Smooth Inhalation- Easy Grip Dive/Pre-Dive Switch Avoids Free At Surface And Is Easy To Use With Gloves- Adjustable Design Helps Diver Fine Tune Cracking Pressure So Breathing Resistance Matches Diver Personal Preference- D…

Dive Rites stainless steel XT backplate is one of the few backplates that is made in the USA. All Dive Rite backplates are laser cut and individually finished by hand. This attention to detail ensures that there will be no rough, jagged edges that could potentially damage harness or accessory webbing. The XT backplate uses an 11 gauge, low carbon and rust resistant 316L grade stainless steel. Weighing in at 5.2 lbs (2.4kg), stainless steel plates are a popular option for divers looking for a more even distribution of ballast weight.The XT backplate is set up with 11´ (27.9cm) on-center mounting holes to accommodate standard double tank bolt kits, including two holes for the upper bolt to

The Dive Rite Oxygen Decompression Regulator is a compact, lightweight option for a deco regulator. Assembled in a clean room using all oxygen compatible materials and lubricants, this shallow water deco regulator can be used with higher concentrations of oxygen without the need for additional preparation.An unbalanced piston DIN first stage gives ideal performance for a shallow water regulator. An OPV on the first stage provides an additional margin of safety in the event of a first stage failure. A single HP port is used for a 1 diameter button guage.The XT2 second stage is a pneumatically balanced second stage with Venturi assist to provide a consistent gas pressure delivery for smooth inhalation.…

The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer, the XTs advance, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/L, the XT performs right alongside premier regulatorson the market today.Features:- Pneumatically balanced design gives consistent gas pressure for easy inhalation- Venturi assist directs airflow from the valve directly to the mouthpiece producing smooth inhalation- Easy grip dive/pre-dive switch avoids free at surface and is easy to use with gloves- Adjustable design helps diver fine tune cracking pressure so breathing resistance matches diver personal preference- Deflection …