Grinders & Polishers Draper

This Draper Storm Force polisher has a 110W motor and a no load speed of 3500rpm. It is intended for domestic or light commerical use and is ideal for polishing paintwork on cars and caravans and in home improvement projects. The polisher is operated by a simple on/off switch and has a comfortable hand grip. It is fitted with a large 240mm diameter flexible sponge backing pad and supplied with one synthetic wool and one cotton polishing bonnet.

1 x D20 20V 115mm brushless grinder 2 x D20 20V lithium batteries (5.0Ah) 1 x D20 20V fast battery charger 1 x 420mm tool bag

This oscillating spindle and belt sander has a double configuration with fast easy changing between spindle sander and belt sander. Dual rotating and vertically oscillating action for fast sanding and improved work rate with reduced chance of burn. The aluminium table tilts 0-45 degrees for easy chamfering and edge work. Maximum versatility and work rate with both intricate shaped and standard workpieces. Powerful 450W induction motor. Vented throat plates and under-table dust extraction channel. Bench mounted or freestanding operation. Non-latching safety on/off no-volt switch with dust cover. On-board storage for all accessories. Supplied with 100 x 610mm 80 grit sanding belt sleeves

Heavy duty machine with worklight designed for use in the garage or workshop. One coarse and one fine grinding wheel adjustable eye protection shields spark deflectors wheel guards and tool rests. Supplied with grinding wheel dresser and storage tray. Fitted with approved plug and cable. Display carton.PTDDRPDIR05097

A compact machine with one coarse and one fine grinding wheel adjustable eye protection shields spark deflectors wheel guards and tool rests. Fitted with a cable and approved plug.PTDDRPDIR66804

This compact benchtop combined belt and disc sander packs a punch when it comes to versatility. The 25mm sanding belt is positioned vertically to its own worktable and there is a belt release and tracking knob to adjust the front wheel of the sander. The 127mm diameter disc is provided with its own worktable and mitre fence. The worktable is a decent size measuring 178 x 95mm, and it can pivot from 0-45 degrees for accurate angle sanding. The machine has a no-volt switch for safety. To keep the workspace clean, the sander can be connected to a vacuum for dust extraction and there is a 40mm outlet for both belt and disc. This belt and disc sander achieves a smooth and detailed finish on

DRAPER 97276 - Draper Storm Force 20V Cordless Grind and Cut Kit

Draper Storm Force® 115mm Cordless Angle Grinder Kit (20V)Features: Part of the Draper Storm Force 20V Power Interchange series, rear hand grip, auxiliary side handle, grinding guard, spindle lock button, locking flange. Batteries and chargers are available separately. Draper Storm Force® 20V interchangeable battery system allows you to combine one battery with any of the tools within the 20V Storm Force series (not compatible with Draper Storm Force® 10.8V).Specification:Battery 20V Stormforce Li-ionNo Load Speed 0-10,000rpmSpindle thread M14Disc Diameter 115mmBore 7/8"/22.2mmWeight 1.7kgCharger amperage 2.4ACharging time 2.0Ah 60 minutesWeight 0.5kgBattery …

ONLINE ONLY Draper Air Sander 150mm 1/4" BSP Variable speed control lever Hook and loop base plate Operating air pressure: 90 psi (6.2 bar) Includes spanner and 1/4" BSP adaptor Variable speed control lever

Designed for the workshop to hone and grind hand and garden tools. With a vertical whetstone honing wheel dry grinding wheel eye protection shield spark deflectors wheel guards and adjustable tool rests. Uses dry grinding wheel especially suitable for high speed steel tooling. Fitted with a cable and approved plug.PTDDRPDIR78456

For general workshop use. Fully adjustable fence and workpiece holder. Powerful induction motor provides a morticing capacity of 1/2". Supplied with depth stop, work clamp, 3 piece chisel set (1/4", 3/8", 1/2"), chisel reducing adaptors, chuck and key. Display carton.No-volt switchTorx is the registered trademark of Acument Intellectual Properties LLC.

Contents (approx.): 10 x 1/4" BSPT straight. 5 x 1/4" BSPT 45°. 5 x 1/4" BSPT 90°. 20 x 1/8" BSPT straight. 5 x 1/8" BSPT 45°. 5 x 1/8" BSPT 90° EN-1A steel with profiles to BS, SAE, DIN. JIS and IS Heat treated to SAE J534 and hardened Yellow zinc plated to ASTM B117 specification Draper Guaranteed Product

Features: Part of the D20 series with Hook and Loop backing pad. Dust box and 3 x sanding sheets supplied. Product also supplied with 2Ah batteries and charger

The Draper D20 20V Tri-Base Detail Sander is an efficient, robust sanding tool with a no load speed of 11000rpm. Part of Draper's D20 series, the sander features a sanding pad of 135 x 135 x 95mm, and a Hook and Loop backing pad for easily switching between attachments. The built-in dust box reduces clogging for a better sanding performance, and the sander arrives with 3 sanding sheets so you're ready to get going straight away. Specifications Part of the D20 series Hook and Loop backing pad Dust box and 3 x sanding sheets supplied Batteries and Chargers are available separately Battery: D20 20V Li-ion No load speed: 11000rpm Sanding pad: 135 x 135 x 95mm Supplied in Case: No Weight (bare …

A workshop machine with one coarse and one fine grinding wheel worklight adjustable eye protection shields spark deflectors wheel guards and tool rests. Supplied with grinding wheel dresser and storage tray. Fitted with approved plug and cable. Display carton.PTDDRPDIR05095