Other Power Tools Draper

A low noise, low vibration composite body 1/2" air ratchet. Fitted with a high tech variable speed motor, rotating air inlet helping prevent airline tangles and a silenced motor outlet. The ergonomic design and lightweight housing assist in prevention of the cold-sink effect. Contents: 1 x Draper Storm Force® Air Ratchet with Composite Body, 1/2" Sq. Dr. Specifications: Air Inlet: 1/4" BSP Average Air Consumption: 5cfm (141L/min) Free Speed: 160 rpm Min Hose Size: 3/8" (10mm) Operating Air Pressure: 90psi (6.2bar) Square Drive: 1/2" Ultimate Torque: 90Nm (66ft/lb) Vibration Level: 2.6m/s2 Weight: 1.4kg

Expert Quality, analogue tyre inflator with clip-on connector suitable for use in transport depots and tyre fitting bays where speed and accuracy are paramount. Lightweight and shockproof bourbon tube/beryllium construction together with the direct valve mechanism provide user comfort and excellent rates of inflation/deflation. The pressure is checked by a robust ceramic sensor allowing precise measurement with tolerances well above the industry standard 86/217/EEC. Reads in psi/bar. Contents: 1 x PCL Airforce Analogue Tyre Inflator Specifications: Hose Length: 1.8M Max Air Supply: 15bar / 218psi Min Air Supply: 3bar / 44psi Operating Temperature Range: -20 ~ 60? Pressure Range: 0-12bar / …

Allows fast and simple tyre inflation. Specification: Pressure range:10-160psi Max air supply pressure;17.2bar/250psi Supply inlet :1/4"" BSP taper (F)Hose length: 0.6M (approx.) Inflator with twin open-ended Push on connectors Allows fast and simple tyre inflation Colour: Silver

An indispensable air tool kit
Designed to provide all the essentials required for the workshop
Included in the kit is a 1/2 inches inch impact wrench, 3/8 inches inch air ratchet, air chisel, die grinder and two blow guns
Air tool fitted with ergonomic handles

A low noise, low vibration composite body 3/8" stubby ratchet. Fitted with a high tech motor with full cage gear and needle bearings, simple forward/reverse lever and rotating air inlet for user comfort. Contents: 1 x Draper Storm Force® Stubby Air Ratchet, 3/8" Sq. Dr. Specifications: Air Inlet: 1/4" BSP Average Air Consumption: 4cfm (113L/min) Free Speed: 200 rpm Min Hose Size: 3/8" (10mm) Operating Air Pressure: 90psi (6.2bar) Square Drive: 3/8" Ultimate Torque: 27Nm (20ft/lb) Vibration Level: 3.1m/s2 Weight: 0.51kg

A low noise, low vibration composite body 1/4" stubby ratchet. Fitted with a high tech motor with full cage gear and needle bearings, simple forward/reverse lever and rotating air outlet for user comfort. Contents: 1 x Draper Storm Force® Stubby Air Ratchet, 1/4" Sq. Dr. Specifications: Air Inlet: 1/4" BSP Average Air Consumption: 4cfm (113L/min) Free Speed: 230 rpm Min Hose Size: 3/8" (10mm) Operating Air Pressure: 90psi (6.2bar) Square Drive: 1/4" Ultimate Torque: 27Nm (20ft/lb) Vibration Level: 3.1m/s2 Weight: 0.51kg

A low noise, low vibration 1/2" impact wrench. Manufactured with a casing made from composite plastics. Fitted with a high tech three-speed reversible motor. The ergonomic design and lightweight housing assist in prevention of the cold-sink effect. Contents: 1 x Draper Storm Force® Air Impact Wrench with Composite Body, 1/2" Sq. Dr. Specifications: Air Inlet: 1/4” BSP Average Air Consumption: 4.0cfm (114L/min) Free Speed: 7,500 rpm Min Hose Size: 3/8” I/D Operating Air Pressure: 90psi (6.2bar) Square Drive: 1/2" Ultimate Torque: 340Nm (250ft/lb) Vibration Level: 3.3m/s2 Weight: 1.8kg

Draper Storm Force, low noise, low vibration air hammer
Each air hammer is fitted with a variable speed motor and a rotating air inlet helping prevent air-lines from kinking
The low noise, low vibration, low weight and silenced motor outlet provide maximum user comfort and performance
Part Number:65142 . Air pump is not included

Inflator with single open-ended clip on connector. Allows fast and simple tyre inflation. Contents: 1 x Air Line Inflator with Open Ended Clip On Connector Specifications: Hose Length: 0.4M Max Air Supply: 17.2bar/250psi Max Air Supply Pressure: 17.2bar/250psi Min Air Supply: 5 PSI Operating Temperature Range: -10 ~ 50? Pressure Range: 0.68-11bar/10-160psi Supply Inlet: 1/4" BSP taper (F)

Features:• Demolition chisel• Supplied with auxiliary side handle, pointed chisel, flat chisel and 3.2m cable with BS PlugVoltage 230V or 110VWattage 1500WMax Impact Rate 1900bpmImpact Joules 45JSupplied in Case YesWeight 14kgVoltage: 230V

Features:• Demolition chisel• Supplied with auxiliary side handle, pointed chisel, flat chisel and 3.2m cable with BS PlugVoltage 230V or 110VWattage 1500WMax Impact Rate 1900bpmImpact Joules 45JSupplied in Case YesWeight 14kgVoltage: 110V

Spare nozzle, needle and cap sets are available.
Variable fan and fully adjustable flow.
Suitable for use with all paint types including water-based.
Spare nozzle, needle and cap sets are available.
Variable fan and fully adjustable flow.
Suitable for use with all paint types including water-based.

General purpose HVLP spray gun with aluminium body. Suitable for use with all paint types including water-based. Variable fan and fully adjustable flow. Spare nozzle, needle and cap sets are available - see table. Contents: 1 x Spray Gun 1 x Cleaning brush 1 x Service spanner Specifications: Air Inlet: 1/4" BSP Average Air Consumption: 14.5cfm (400 l/min) Fluid Delivery Rate: 190-250ml/min Fluid Nozzle Size: 1.4mm Operating Air Pressure: 43psi (3 Bar) Weight: 0.55kg

General purpose HVLP spray gun with aluminium body. Suitable for use with all paint types including water-based. Variable fan and fully adjustable flow. Spare nozzle, needle and cap sets are available - see table. Contents: 1 x Spray Gun 1 x Cleaning brush 1 x Service spanner Specifications: Air Inlet: 1/4" BSP Average Air Consumption: 8cfm (226 l/min) Fluid Delivery Rate: 70-110ml/min Fluid Nozzle Size: 1.0mm Operating Air Pressure: 43psi (3 Bar) Weight: 0.276kg

This T-handle hexagon breaker is designed to break concrete and similar materials and is intended for trade use. With a weight of 22.5kg, a wattage input of 2,100W and an impressive 85J impact energy, this breaker with 30mm hex shank is suitable for undertaking most breaking jobs at base level. The motor is fan cooled and the set includes two 410mm bits – a flat chisel and a point chisel. These bits are easy to fit to the chuck using a simple twisting action. Also included with the breaker is a spanner to remove the sight glass to enable the oil reservoir to be filled and a bottle of oil. The breaker comes fitted with a 3.2m HD electrical cable and a BS plug. The handles have been sited for ea…

Expert Quality, superior air gun manufactured from die cast aluminium. Each air blower is manufactured with a distinctive and unique 'venturi' system, which delivers a 15% increased performance while providing safety by operating as a bypass system if the nozzle is blocked. Fitted with a variable flow trigger, 1/4" air hose inlet and extra long right angled nozzle. Contents: 1 x Air Blow Gun - Right Angle, 560mm

Expert Quality, superior air gun manufactured from die cast aluminium. Each air blower is manufactured with a distinctive and unique 'venturi' system, which delivers a 15% increased performance while providing safety by operating as a bypass system if the nozzle is blocked. Fitted with a variable flow trigger, 1/4" air hose inlet and extra long nose. Contents: 1 x Air Blow Gun, 300mm

Expert Quality, a superior air gun manufactured from die cast aluminium. Each air blower is manufactured with a distinctive and unique 'venturi' system, which delivers a 15% increased performance while providing safety by operating as a bypass system if the nozzle is blocked. Fitted with a variable flow trigger and 1/4" air hose inlet. Contents: 1 x Air Blow Gun - Needle Nose

Expert Quality, a superior air gun manufactured from die cast aluminium. Each air blower is manufactured with a distinctive and unique 'venturi' system, which delivers a 15% increased performance while providing safety by operating as a bypass system if the nozzle is blocked. Fitted with a variable flow trigger and 1/4" air hose inlet. Contents: 1 x Air Blow Gun - Stubby

Expert Quality, lower noise, low vibration, soft grip ratchet designed for the professional user. Rear rotating exhaust for user comfort. Rotating air inlet to prevent air lines tangling. Rubber boot around ratchet head to Minimise in use damage. Contents: 1 x Soft Grip Reversible Air Ratchet, 3/8" Sq. Dr. Specifications: Air Inlet: 1/4" BSP Average Air Consumption: 4cfm (113L/min) Free Speed: 200 rpm Min Hose Size: 3/8" (10mm) Operating Air Pressure: 90psi (6.2bar) Square Drive: 3/8" Ultimate Torque: 68Nm (50ft/lb) Vibration Level: 2.6m/s2 Weight: 1.2kg

Draper Digital In-line tyre inflator fitted with a clip-on connector compatible for most vehicles including; cars, commercial vehicles, motorbikes and trailers and the easy to read 65mm digital gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 20 BAR (300psi). Supplied with a 1/4" BSP male adaptor. The pressure dial on this model is for guidance only and should be checked with a tyre pressure gauge to BS EN12645. Specifications Colour: Black Guarantee: 1 year Pressure range: 0-20bar/0-300psi Supply inlet: 1/4" BSP taper (F) Hose length: 0.45M #html-body [data-pb-style="60FF6AB227696"]{justify-content: flex-start; display: flex; flex-direction: …

Expert Quality, digital air line gauge. Its highly accurate industrial quality fabrication make it suitable for use on garage forecourts and tyre fitting bays. Fitted with a large LCD backlit screen with multi-pressure unit and twin connectors. Supplied with calibration certificate and two AAA batteries.Decription: AirlineSpecification:Pressure range ... 0.3-17.2 bar/4-250psi/30-1723kPAReading Accuracy ... 0.01bar, 1kPa, 0.1psiMax inlet pressure ... 18bar, 260psi, 1800kPaInflation flow(@13BAR) ... 500l/min, 18CFM Supply inlet ... 1/4" BSP taper (F)Hose length ... 0.53m (21")

This high pressure suction feed spray gun with 1.8mm nozzle has an adjustable spray pattern and dual trigger action. The 1L capacity paint pot is lightweight, made from aluminium for a long service life. Suitable for celluose, metallic, synthetic and other similar viscosity paints. Ideal for most basic spray shop applications. Supplied with an 1.8m nozzle kit, 1/4" BSP adaptor, spanner wrench and cleaning brush. Contents:1 x 1.8mm nozzle kit1 x 1/4" BSP adaptor1 x Spanner wrench1 x Cleaning brushSpecifications:Capacity: 1LNozzle size: 1.8mmOperating air pressure: 50-70psiAir inlet: 1/4 BSPWeight: 425g

This HVLP air paint spray gun with 1.3mm nozzle has an adjustable spray pattern and is made from aluminium, making it lightweight for ease of use. It comes with a 600ml capacity paint pot. Suitable for most paint types, including water-based. Supplied with a 1.4 and 2.0mm nozzle kit, 1/4" BSP adaptor, spanner wrench and cleaning brush. Contents:1 x 1.4, 2.0mm nozzle kits1 x 1/4" BSP adaptor1 x Spanner wrench1 x Cleaning brushSpecifications:Capacity: 600mlNozzle size: 1.3, 1.4, 2.0mmOperating air pressure: 43psiAir inlet: 1/4 BSPWeight: 579g