Hi-Fi Racks & Mounts

Sub1/Sub2 Adjustable Speaker Pole
This speaker pole allows you to mount your Bose S1 Pro PA or other compatible system above your Bose Sub1 or Sub2 powered bass module. Just lay your Sub1 or Sub2 on its side and you’ll find an integrated M20-threaded pole mount. Sub1 and Sub2 (sold separately) combine with virtually any portable PA to deliver powerful bass from a unique RaceTrack driver design that gives your songs full impact and brings any event to life with bold bass.

FEATURES
• Designed for use with Bose Sub1 or Sub2 powered bass modules
• Mount Bose S1 Pro portable PA or other loudspeakers above Sub1 or Sub2
• Telescoping capability with locking pin for extension …

Intermec 805-638-001 mounting kit

Ergotron THIN CLIENT CPU HOLDER, BRIGHT WHITE TEXTURED

DesignMax Pan & Tilt Bracket Small White
A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM3SE surface-mount loudspeaker. The DMSBRKT bracket can be installed on a wall or ceiling. The DMSBRKT is for indoor use only. Includes installation hex key tool horizontal adapter plate and cosmetic cover. Compatible with FreeSpace FS2SE surface mount loudspeakers.
- Features
- Single/ Pair Single

DesignMax Pan & Tilt Bracket Small Black
A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM3SE surface-mount loudspeaker. The DMSBRKT bracket can be installed on a wall or ceiling. The DMSBRKT is for indoor use only. Includes installation hex key tool horizontal adapter plate and cosmetic cover. Compatible with FreeSpace FS2SE surface mount loudspeakers.
- Features
- Single/ Pair Single

WBPWR-50B Outdoor Pan and Tilt Bracket
A pan-and-tilt bracket that allows both pitch and yaw adjustment. The bracket fits the 4x M8 threaded inserts (127 x 70 mm) on the rear panel of the F1 Model 812 DesignMax DM3SE DM5SE DM6SE DM8S and the AMM108.
- Features
- Single/ Pair Single

Huddly 7090043790191 mounting kit

Axis 5505-841 mounting kit

The outdoor-ready AXIS T94A01L Recessed Mount is designed for discreet and elegant installations of AXIS Q60-E PTZ Network Cameras in roof overhangs/soffits. Appreciated outside retail stores hotels entrances and larger residential buildings. Made of aluminum and stainless steel it supports both safety standards and the impact resistance of the camera.

Together with the recessed mount AXIS Q60-E can be mounted in panels wood or pre-made holes in solid concrete. The mount is very sturdy and made of aluminum and stainless steel.

It supports IK10 rating which makes the mount impact resistant to secure the installation from tampering. It also offers two 3/4" conduit holes for a plenum and/or …

AXIS Din Rail Clip for AXIS T8640 Ethernet over Coax Adaptor PoE+.

Axis 5017-028 mounting kit

The ThinkCentre Tiny/Nano Monitor Clamp II is a uniquely designed accessory which secures Tiny or Nano devices onto selected ThinkVision monitors. This mounting device need combined with Tiny VESA Mount II or Nano VESA Mount for secure mounting functionality.The highly integrated and secured solution will allow you to create a lean working environment and a better user experience.Specifications:- Product Dimensions (L*W*H): VESA Plate:120 x120 x12.3mm T32 Monitor BKT:103.11 x58.5 x73.8mm T27 Monitor BKT：100.86 x52.5 x73.8mm T24 Monitor BKT：99.95 x47 x73.8mm- Supported PC Weight: 5 kg- Compatible with ThinkCentre Tiny and Nano PCs and Think Vision T-Series and P-Series selected monitors.- New …

Lenovo 4XF1C39743 computer case part

Lenovo 4XF1A40559 mounting kit Black

NEW

Use the two sturdy metal brackets and included steel screws to secure your LD- SD- or HD-4141 cash drawer beneath your POS counter where no one can see it. The included spacers ensure stable secure mounting that wont scratch the finish on your 4141 drawer.

The 3U Fixed Rail Kit is one of the most flexible and economical rack mount kits in our range. Adjustable and universally compatible this kit is a cost effective solution to mounting rack format and tower servers switches SAN and NAS devices. This product replaces lost broken or wrongly fitting rails without any loss of 'U' space in the rack. Almost any 3U or bigger piece of rack equipment will work with this rail kit!

Mounting adapter allows a 3.5" device, 3.5" HDD or 2.5" SSD/HDD to fit into a 5.25" PC drive bay.

Wall Track is a low-cost zero-footprint mounting system that attaches to most vertical surfaces. It accommodates an entire computer workstation.

Separately-ordered brackets are required to attach components to Wall Track (view + Accessories). The height of components can be adjusted by loosening set-screws on these brackets.

Benefits

- Acts as a common interface for Wall Mount Arms and CPU Holders; accommodates an entire computer system.
- Strengthens installation by distributing weight over a larger surface area.
- Sturdy extruded aluminum construction.
- OSHPD pre-approved for California hospital requirements.
- Includes channel covers that conceal and route cables.…

Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (230 x 250 mm) is suitable for a wide range of monitors and other equipment in this size range. The plate can be tilted continuously up to 12.5° and moved to optimise the centre of gravity. A stop bar ensures the necessary safety and prevents the monitor from slipping. The practical table clamp enables attachment to tabletops with a thickness of 10 to 52 mm. The individual height can be adjusted in 4 steps between 335 and 435 mm. In terms of load capacity, a centric load of up to 25 kg is possible. The support plate can be rotated 360° for perfect alignment.…

Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (205 x 245 mm) is suitable for a wide range of monitors and other equipment in the same size range. A practical table clamp allows it to be attached to tabletops with a thickness of 10 to 52 mm. The individual height adjustment is possible in 6 steps between 335 and 485 mm. In terms of load capacity, a centric load of up to 25 kg is possible. The support plate can be rotated 360° for perfect alignment. Rubber pads are included for secure, noise-insulating support of the monitors.
Material: Steel
Height Adjustable: Yes
Type: Stand
Load Capacity: 25 kg
Net Weight …

Height-adjustable desktop stand for near-field monitors. The solid metal construction with the large support plate (205 x 245 mm) is suitable for a wide range of monitors and other equipment in the same size range. Four felt-covered support pads provide decoupling under the base plate. The individual height can be adjusted in 6 steps between 350 and 500 mm. In terms of load capacity, the stand can be centrally loaded up to 25 kg. Rubber pads are included for secure, noise-insulating support of the monitors.
Height Adjustable: Yes
Type: Stand
Material: Steel
Base Dimensions: 250 x 210 mm
Minimum Height: 350 mm
Colour: Black
Net Weight (kg): 3.6
Weight: 3,6 kg
Load Capacity: 25 kg
Made in: Germany<…

Two stylish and durable table stands for studio monitors and speakers. The set is available in white, black and gray. The height of the stands is 253 mm. 4 rubber pads each for base and support plate provide non-slip stand and sound absorption. The maximum recommended load is 15 kg. The respective support plate measures approx.150 x 180 mm and the stable steel stands have an individual weight of 3 kg.
Made in: Germany
Height Adjustable: No
Package Quantity (pcs): 2
Base Dimensions: 195 mm x 214 mm
Load Capacity: 15 kg
Original Colour by Producer: Grey;Grey
Panel Surface: 150 mm x 180 mm
Net Weight (kg): 3.41
Type: Stand
Colour: Grey
Material: Steel…

Two stylish and durable table stands for studio monitors and speakers. The set is available in white, black and gray. The height of the stands is 253 mm. 4 rubber pads each for base and support plate provide non-slip stand and sound absorption. The maximum recommended load is 15 kg. The respective support plate measures approx.150 x 180 mm and the stable steel stands have an individual weight of 3 kg.
Type: Stand
Material: Steel
Original Colour by Producer: Black;Black
Colour: Black
Height Adjustable: No
Made in: Germany
Net Weight (kg): 3.41
Panel Surface: 150 mm x 180 mm
Base Dimensions: 195 mm x 214 mm
Package Quantity (pcs): 2
Load Capacity: 15 kg…