Car Subwoofers

Car Subwoofer Speaker / Diameter 300 mm / Mounting Depth 115 mm / 300 watt / Nominal Load 200 Watt / 94 dB / Impedance 8 Ohm

Boxed Subwoofer / Diameter 270 mm / 11 Inch / 300 watt / Impedance 4 x 4 Ohm

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Boxed Subwoofer / Nominal Load 300 Watt / Impedance 4 Ohm

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

This product is made of high quality material, non-toxicity, lightweight with high durability. You will love it. Features: Made of high quality material, non-toxicity, lightweight with high durability. Beautiful and luxury design, stylish and smooth touch. Easy to use and reusable. convenient to install.

Affordable big-bass performance - without taking up lots of room in your trunk or cargo area. Tough as nails. Load your cargo right on top of the sub for extra space – with plenty of bass! Full perimeter venting and UniPlate back plate and pole piece Stiff, injection-molded cone with 360-degree back bracing Utilizes extensive internal bracing, thick MDF construction and custom embroidery

Premium low-frequency sound suited for the marine environment Water-resistant connectors for simplified installation and superior protection Rigorously tested marinized design with IP65 rating (Dust-tight. protected against low-pressure jets of water) Designed to optimally work with Fusion stereo systems and amplifiers (sold separately) with custom DSP profiles International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Power - 3400 Watts Max x 1 @1-Ohm, 1700 Watts Max x 1 @2-Ohms, 850 Watts Max x 1 @4-Ohms 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(…

100 watts RMS 300 Watts Maximum Impedance 4 Ohm 16.5 cm SPL 90db 1 W 140 mm, 42 mm/1 m frequency response: 35 Hz – 21 kHz EÖ: Woofer Tweeter et: 47 mm, 14 mm woofer tweeter

Protect your sound investment with these stylish grilles from Kicker. Works for Kicker CompR 12" Subwoofers Covers screws for a sleeker, cleaner install.

10-Inch Cast Aluminum Subwoofer Grille Enhances the look of your 08 Series Kicker Solo-Baric subwoofers Protects the sub from damage This grill is sure to give your woofer an attractive look Compatible with: 11S10L74, 11S10L72, 08S10L74, 08S10L72, 08S10L54, and 08S10L52

Space-saving subwoofer solution Recommended power: 800 – 2500 watts. Voice coil 63 mm copper Long-stroke sandwich beading. Solid cast aluminium basket

Boss Audio CXX124DVC 12" 1200 Watt Car Stereo Subwoofer Dual-4 Ohm Sub. Chaos Exxtreme - 12 inch DUAL Voice Coil (4 Ohm) 1200-watt Subwoofer One 12" Woofer with DUAL 4 ohm 2.5" Voice Coil. 1200 Watts MAX 600 Watts RMS Power Handling. 85dB Sensitivity, 32 Hz Resonant Frequency Polypropylene Cone and Rubber Surround. Works in .9 - 1.4 CuFt Sealed or 1.44 - 2.16 CuFt Ported enclosures

Flat Subwoofer / Diameter 200 mm / Nominal Load 150 Watt

SWT-10S4 - Alpine 10" 350W RMS Single 4-Ohm Truck Subwoofer 10" truck subwoofer with 4-ohm voice coil Power handling: 350 watts RMS (1000 watts peak) Frequency response: 30-200 Hz Mounting depth: 4-3/16"

High quality front bass reflex subwoofer enclosure, technical data: Housing Type bass reflex, Net Volume 70 L Diameter: 300 mm. 2 x 30 cm chassis with IMPP membrane Power Handling 700 WRMS, Impedance 2 x 2 Ohm Dimensions 820 x 365 x 390 (290) mm

On b W O or fe R 40hz-400hz Rear High Pass 50hz-1.5Khz Front high pass 50hz-7.5Khz.

Bundle includes: 2 Rockford Fosgate P2D4-12 12” Subwoofer - DVC (dual 4-Ohm), 400 Watts Rms, 800 Watts Peak Dual linear spider with embedded 16 AWG tinsel leads Custom 10-AWG nickel plated push terminals Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)

Power Range: 100W - 350W RMS Power Handling: 350 Watts Peak Power Handling: 1000 Watts Frequency Response: 30Hz - 200Hz Material: Poly-Mica Dust Cap & Pulp-Kevlar