Snips IRWIN

IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in). The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.IRWIN Record 930H Arm Adjusted High Tensile Bolt Cutter 760mm (30 in). Overall Length: 760mm (30 in).Max Cutting Capacity: 9.5mm (3/8 in).Additional Information:• Size: 760mm (30in)• Cut Capacity: 9.5mm

IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in). The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire. The Record IRWIN REC942H Arm Adjusted High Tensile Bolt Cutters have the following specifications Overall Length 106cm (42 inch). Max Cutting Capacity 12.7mm (1/2 inch)

Snip tool features compound cutting action with textured grips and an E-Z close latch
Snips are great for cutting sheet metal, vinyl, plastic, rubber and many other applications
Multipurpose snips with compound cutting leverage
Pro-Touch grips provide superior comfort and resist twisting
Cuts up to 18-gauge cold-roll steel and 23-gauge stainless-steel

Irwin G245/8 Gilbow General Purpose Straight Tin Snips 8 Inch / 200mm The Irwin G245/18s are 8 Inch / 200mm long Tin Snips referred to as 'Gilbows'. Irwin Gilbow snips and shears have a cutting capability much greater than the strength of the user. The original tin snips were first designed in 1924 and have dominated the sheet metal cutting industry. Features:
- UNIQUE NON-SLIP JOINT - set and tested for a perfect cut. This should be re-adjusted only after sharpening
- DOUBLE, HOLLOW GROUND BLADES - reduce friction for easier cutting
- DROP-FORGED - carbon tool steel handles and blades
- SAFETY STOP - prevents trapped fingers Specification:
- Size: 8 Inch / 200mm…

IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in). The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire. IRWIN Record 914H Arm Adjusted High Tensile Bolt Cutter 355mm (14 in). Overall Length 355mm (14 in). Max Cutting Capacity 5mm (3/16 in).

Irwin G245/12 Gilbow General Purpose Straight Tin Snips 12 Inch / 300mm The Irwin G245/12s are 12 Inch / 300mm long Tin Snips referred to as 'Gilbows'. Irwin Gilbow snips and shears have a cutting capability much greater than the strength of the user. The original tin snips were first designed in 1924 and have dominated the sheet metal cutting industry. Features:
- UNIQUE NON-SLIP JOINT - set and tested for a perfect cut. This should be re-adjusted only after sharpening
- DOUBLE, HOLLOW GROUND BLADES - reduce friction for easier cutting
- DROP-FORGED - carbon tool steel handles and blades
- SAFETY STOP - prevents trapped fingers Specification:
- Size 12 Inch / 300mm…

IRWIN Record Cam Adjusted High Tensile Bolt Cutters (BC Series) with jaws specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/square in). Special design for quick simple adjustment, yet still offering heavy-duty cutting performance and hard working reliability. The lighter handle construction is ideal for difficult or uncomfortable situations.IRWIN Record BC924H Cam Adjusted High Tensile Bolt Cutter 610mm (24 in).Overall Length: 610mm (24 in).Max Cutting Capacity: 7.9mm (5/16 in).Additional Information:• Size: 610mm (24in)• Cut Capacity: 7.9mm

These IRWIN Gilbow curved cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged. The hollow ground jaw faces provide a longer life to the cutting edge. Gilbow tin snips are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good easy smooth cutting movement. Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece. The original Gilbow cutting snips were first designed many years ago and they have dominated the sheet metal cutting industry to …

IRWIN Record Arm Adjusted High-Tensile Bolt Cutters have jaws that are specially heat-treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in). The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high-tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.IRWIN Record 936H Arm Adjusted High Tensile Bolt Cutter 910mm (36 in). Overall Length: 910mm (36 in). Max Cutting Capacity: 11.1mm (7/16 in).Additional Information:• Size: 910mm (36in)• Cut Capacity: 11.1mm