Other car electronics

Product Description: Suitable for Yamaha 3-pin, 4-pin, and Hobda 6-pin OBD2 diagnostic connection cables OBD2 fault code reader adapters Explain: This cable will allow you to connect the compatible diagnostic tools of Yamaha motorcycles or Honda motorcycles with 3-pin or 4-pin sockets to existing 16-pin OBD2 tools, allowing you to read fault codes on all Yamaha or Honda motorcycles compatible with OBD2 3 Pin Yamaha - Y15-V2 - YZF-R125 - MT-125 - YS-125 - Delight-125 - N-MAX 125 - X-MAX 125 - X-MAX 300 - X-MAX 400 - AEROX 50 (2018) 4 Pin Yamaha - FJR 1300 (2016-) - FZ09 (2017-) - FZ10 (2016-) - MT07 (2016-) - MT09 (2016-) - MT09 Tracer (2016-) - MT10 (2016-) - R1 (2016-) - R6 (2017-) -

Compatibility: - Fit for Jaguar XF / XK / XKR / X-Type / S-Type 2007 2008 2009 2010 2012 - And other models which is as same as our picture. Features: - Remote key shell case replacement - Please make sure your key is the same as the pictures show. - Easy and simple replacement: You need to go to local locksmith/dealer get the key programmed and cut the key blade before using. - Firm material, good hand feeling. Compatibility: - Please make sure that your vehicle is on the above compatibility guide. If your vehicle is not on the guide this shell will not fit for you. And make sure the button is same with your original shell. Package Weight: 37.0 G / 1.31 Ounces Package Dimensions

1.Fitment: OBD2 diagnostic connector is perfect replacement for mazda OBD2 Diagnostic Tool. 2.Compatibility: OBD2 male plug is suitable for AUTEL Maxisys pro MS908p, MS906BT, DS808K, MK808 Connector for MaxiSys MS908. 3.Application: 17?pin OBD II connector can work with for Autel MaxiDAS DS708 scanner, has high performance. 4.Premium Material: With the use of high quality ABS material, heat resistant and durable, do not need to change frequently. 5.High Reliability: Professional manufacturing, high precision, strong reliability, making sure safety use.

Automatic detection of output voltage and current. Can test any size LED backlight and light beads. High brightness, no need to remove the screen can judge the quality of the backlight. Features: Intelligent regulation of voltage and current. No burning lamp, no electric shock, reverse protections. High brightness, accurate judgment. Wide voltage, input and output barrier-free. Double isolation. High and low pressure can be switched. Multiple light sources can be tested: test any LED lamp strips, lamp board COB light source, lamp bead, etc. No need to remove the screen: test LED TV backlight and other LED backlight of any size without detaching screen. Test voltage: test the voltage parameters …

Functions: Nickel-plated material, strong corrosion resistance. 5 LED lights display the percentage of moisture content in brake fluid. Auto power off, powered by 2 * AAA Batteries (not included) Support DOT 3, DOT4, DOT5.1 different brake fluid. Simple button design, Long press 3 seconds for Power On/Off; Long press 2 seconds Turn the flashlight On/Off;One press for oil type select. Specification: Model: BF100 Material: Industrial grade ABS material Display: Three-color LED light display Color: Black Test Range: DOT3, DOT4, DOT5, DOT5.1 Temperature: 0-60℃ Be Applicable: All vehicles Power: 2 * AAA Batteries (not included) Package Included: 1 x Brake Fluid Tester

Main Features Features Alternator State Check. Battery State Check. Battery Overload Display. 6-Led Display, Clearly Present The Alternator And Battery State. Two Testing Clips For Safe And Easy Operation. Small Size And Light Weight, Convenient To Carry. Fit For Car, Motorcycle, Etc. Suitable For 12V Lead Acid Batteries, Hardtop Batteries, Discharge Batteries And Maintenance Free Batteries Heavy Duty Insulated Clamps. Easy And Safe To Use, No Sparking. With A Good Chip Inside, Not Easy To Get Hot On The Surface.Specifications A Model T16897 A Led Quantity 6 (2 Red, 3 Green And 1 Yellow)A Material Of Wire 0.06Square Millimeter CopperA Max. Voltage And Current 12V 15AA Length Of Wi…

Description: By regularly checking the engine, this code reader keeps the engine performance in good condition and prevents future expensive repairs. What this code reader can offer is that it provides quick and easy access to diagnostic trouble codes, erase diagnostic trouble codes and reset the OBD II monitor status, and review the emission readiness status of the OBD II display. It is constructed of ABS material. The length of the main unit is 10.3 cm, the width is 6.8 cm, the height is 1.6 cm. Simply plug it in through its standard 16-pin OBD-II connector at the first sign of trouble and start diagnosing. Though small in size, it is powerful enough to retrieve the same information as

The newly developed wireless scan tool, support almost all OBD-II protocols with latest version 1.5 Bluetooth connection, no Batteries, Cables, or Switches required. Wireless (Bluetooth) 5~10 meters. Retrieve Fault Codes (DTCs) and clear Check Engine lights. Can also be used with a PC with a Bluetooth Card. Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). Display current sensor data, including: 1.Engine RPM 2.Calculated Load Value 3.Coolant Temperature 4.Fuel System Status 5.Vehicle SpeedV1.5 6.Short Term Fuel Trim 7.Long Term Fuel Trim 8.Intake Manifold Pressure 9.Timing

Origin : Mainland China Item Type : Code Readers & Scan Tools Certification : CE

Features: Determination of chassis, model, engine, gearbox and complete set 1. Searching of all units and reading: 1) Identification data 2) VIN and ADFG 3) programming info (UIF) 4) errors (DTC) 2. Reading and saving in files: 1) program memory 2) EEPROM 3) coding data 4) amount of DTCs and DTCs shadow-memory 5) live data 6) programming info (User Info Fields) 3. Copying ZCS (IKE - EWS) and FA (IKE - LCM) coding and other functions in various units 4. "Unlocked" functions to show possibilities of full version 1) DTCs description in DME MS43.0, EWS3, SRS MRS4 2) Clearing DTCs in same units 3) EWS-DME synchronization

ntroduction:CNBJ-707 is a quick go/no-go tester relays that provides with indication of the general health and functioning of the most common Automotive relays. Tester will check for proper functioning of the relay contacts by connecting the car battery (11V--15V) to the relay coil. Tester will watch the pin configuration,the time to contacts closure and opening, consistency of the relay during each test session, Tester will light the GREEN LED if all passed during the test session,if not light the RED LED. Introduction: 1. Connect the power leads to the car battery --black alligator clip to negative terminal, red alligator clip to positive terminal. 2. Tester is powered up when the LED

User Manual: 1. Turn off the vehicle engine. 2. Remove the fuse and place it in the slot of AE150. Please ensure that the circuit protection is correct. (The detection fuse of the tester is 20A/48V, standard type) 3. Insert the plug of the tester into the vehicle fuse socket. 4. If necessary, first start the vehicle engine and power up the circuit. Then press the power switch to turn on the detector 5. During the test, operate the circuit and the display screen will display the measured current. 6. After completing the measurement, press the power button again to turn off the tester. Description: Product Name: Car Current Detector Fuse Ammeter Measurement range: 0.01A~19.99A Maximum load:

Note: The attached power supply should be connected to 220V, or the host should be plugged into a 12V output DC power supply. Features: Dual Hole Tester :The car spark plug tester has two testing holes, you can test two spark plugs meanwhile and and if you suspect any spark plug works improperly you could compare and test to make accurate judgment. Wide Application :The car spark plug tester is used to test spark plug performance and ignition strength. High-quality and Durable Material :The car spark plug tester is made of high-quality and durable material, which could help for a long time. Portable and Simple Operation :The car spark plug tester owns a mini size with lightweight, so

Inner Door Lock Latch Bowden Cable Front Right or Left 13186768 for Opel Corsa D 5-Door. Cable Lenght: 635 mm. Replacement part for OEM: 13186768 Fits: Vauxhall Opel Corsa D 5-Door 2007-2015 Front Right or Left Door of All 5 door Models. BROSS is warranted that his products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.

Inner Door Handle Release Lock Latch Bowden Cable Rear Doors 13258268 for Opel Corsa D 5-Door. Cable Lenght: 530 mm. Replacement part for OEM: 13258268, 13258265, 13258267, 0325407955, 0803122125B, 511697042. Fits: Vauxhall Opel Corsa D 2007-2015 Rear Right or Left Door of All 5 door Models BROSS is warranted that his products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.

Inner Door Lock Latch Bowden Cable Front Right Door 98822123 For Fiat Albea Palio. Cable Lenght: 380 mm. Replacement part for OEM: 98822123. Fits: Fiat Albea 2002–2012; Fiat Palio 1996–2019. BROSS is warranted that his products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.

Provides an easy method to connect a multimeter to the vehicle electrical system to diagnose hidden battery drain.? Features: Replaceable inline fuses protect both the meter and tester in the event a high current source on the vehicle is left on. The multimeter is bypassed with the switch during connection in case of a power surge. The tester and meter can remain connected until other computer systems shut down, isolating the drain. As a convenience, stacking banana connectors are used on the tester.? Specifications: Material: Plastic Package Size: 20 * 14 * 3.5cm Package Weight: 150g Package List: 1 *?Drain Tester?? Instructions: 1. Park and turn off the engine, open the hood, lock the door,…

for ICOM D Cable ICOM-D Motorcycles Motobikes Diagnostic Cable, this one can works together with BM-W ICOM or BMW ICOM A2, used to diagnose BMW Motocycles. Package List: 1pc x for ICOM D Cable for BMW Motorcycles Motobikes With BMW ICOM

Features: 100 brand and high quality. It is durable and convenient. Work with all OBD2 compliant vehicles. Enable to read diagnostic trouble codes. Small bluetooth interface with a 16 pin socket. Support different kinds of devices to use this scan tool. Communication agreement: 1. SAE J1850 PWM (41.6K baud) 2.SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2 (5 baud initialization, 10.4 kilo baud) 4. ISO14230-4 KWP (5 baud initialization, 10.4 kilo baud) 5. ISO14230-4 KWP (quick start, 10.4 Kbaud) 6. ISO15765-4 CAN (11-digit ID, 500 Kbaud) 7.ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11-digit ID, 250 Kbaud) 9.ISO15765-4 CAN (29bit ID, 250 Kbaud) Characterization: Type:ELM327 OBD2

Features: Advanced Electric Socket Tester: for rapidly detecting whether the socket"s wire connection is correct or not. Portable Compact Size: sturdy material yet light-weighted, the outlet tester is easy to carry around and convenient to use. RCD Button for Testing Leakage: plug the tester into the 3 holes socket and press the RCD test button, then the normal RCD will trip, which means RCD fail or missing if it doesn"t trip. NCV Test: hold the tester and move it around, the built-in beeper will beep when the inner sensor detects AC voltage nearby. High Definition LCD Display: clearly colored LCD displays symbols of high voltage, neutral wire, NCV, live wire, earth wire, wiring correct/wrong,…

Top 5 Reasons To Get Mini OBD2 Wifi Scanner: 1. PIC25K80 chip, more features and more stable performance. 2. V1.5 version, support more protocols, support more models and model years. 3. Works with all OBD-II compliant vehicles. ( I.e. all vehicles ) 4. Wifi wireless connection, simply and quickly connect your vehicle. 5. Support Four operating platforms ( IOS, Android, Symbian, Windows ) Supported Protocols: 1.SAE J1850 PWM (41.6Kbaud) 2.SAE J1850 VPW (10.4Kbaud) 3.ISO9141-2 (5 baud init, 10.4 Kbaud) 4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5.ISO14230-4 KWP (fast init, 10.4 Kbaud) 6.ISO15765-4 CAN (11bit ID, 500 Kbaud) 7.ISO15765-4 CAN (29bit ID, 500 Kbaud)

2 Pair Car Male+Female Plug Adapter Diagnostic Fiber Optic Bypass Loop Black Kit Brand new and high quality Stable characteristics, high reliability. Material: Plastic Core diameter: Φ1.0 Core material: domestic or imported fiber Size: 11.5cmX2.5cmX1.2cm (LXWXH) Color: Black Feature: 1. The MOST Diagnostic Kit to help you to quickly find the fault point, whether it is the problem of the motherboard transceiver, or cable connection problems 2. The optical fiber loop can remove or add a single vehicle equipment, and do not affect the car fiber-optic network 3.It also can diagnose and find fault point when a node in the MOST (Media Oriented Systems Transport) 4.Bluetooth phone module was often d…

Features: Small size, compact structure. Plug and never unplug. Stable wireless connection, Supports all OBDII protocols. No wires or batteries (adapter is powered by the diagnosis size sockets). Stop communication, wait half an hour, auto sleep. Supports all 12V gasoline and diesel/hybrid electric vehicles since 1996. Specifications: Brand: KONNWEI Model:KW902 Color: blackwhiteredgreenorange(optional) Material:ABS BT version: BT 4.0 Language: default English Supply voltage: 12V Support protocols: ISO 9141, KWP2000, SAE J1850, CAN, J1850 VPW,J1850 PWM Support system: XP WIN7 WIN8 WIN10; Support android & IOS system? Package size: 12 * 7.5 * 4cm Package weight: 100g Package List: 1 * Scan