Hi-Fi Racks & Mounts Konig & Meyer

Robust wall mount for holding speakers with flange socket up to 25 kg. The swivel range is continuously adjustable up to 120°. The tilt can be fixed in three steps with 0°, -12.5° and -25°. A patented expanding mandrel ensures a wobble- and vibration-free fit of the speaker. The solid steel construction and durable powder coating ensure long-lasting use.
Net Weight (kg): 2.0
Colour: Black
Made in: Germany
Load Capacity: 25 kg
Type: Wall Mount
Height Adjustable: Yes
Material: Steel

Solid and stable wall mount with adjustable boom for monitors and speakers up to 15 kg. The boom can be swiveled on both sides up to 54° and tilted continuously up to -17°. The width is 170 mm and the clamping depth ranges from 150 to 220 mm. Self-adhesive rubber pads protect the surface of the box and prevent vibration noise. User-friendly controls allow quick and convenient adjustments, which also remain fixed. The sturdy metal construction is protected by a durable powder coating.
Variant: M
Load Capacity: 15 kg
Made in: Germany
Colour: Black
Net Weight (kg): 2.05
Panel Surface: 150 x 220 mm
Type: Wall Mount
Material: Steel
Height Adjustable: No…

Robust and useful loudspeaker ceiling mount with 250 mm distance and internal cable management. The swivel area is +/-45 °. Within the parameters - the settings range from 0 to 45°. The clamping bracket is for loudspeakers with a vertical mounting template from 70 to 76.2 mm. For other attachment possibilities additional adapter brackets are available. A mounting bracket with side and central cable management makes mounting to the ceiling easier. Finish: Black
Made in: Germany
Colour: Black
Original Colour by Producer: Black

Height-adjustable desktop stand with tilt support. The solid metal construction with the large support plate (230 x 250 mm) is suitable for a wide range of monitors and other equipment in the same size range. The plate can be continuously tilted up to 12.5° and can be moved to optimise the centre of gravity. A stop bar ensures the necessary safety and prevents the monitor from slipping. Four felt-covered support pads provide decoupling under the base plate. The individual height can be adjusted in 4 steps between 350 and 450 mm. In terms of load capacity, the stand can be centrally loaded up to 25 kg. Rubber pads are included for secure, noise-insulating support of the monitors.
Minimum …

50kg maximum load, 35mm diameter pipe, adjustable height (12701930mm). Weight: 2.45kg. Colour: Black
Diameter (mm): 35.0
Made in: Germany
Load Capacity: 50 kg
Maximum Height: 1930 mm
Weight: 5 kg
Minimum Height: 1270 mm
Diameter: 35 mm
Incl. Gig bag/Case: Gigbag
Colour: Black

Two stylish and durable table stands for studio monitors and speakers. The set is available in white, black and gray. The height of the stands is 253 mm. 4 rubber pads each for base and support plate provide non-slip stand and sound absorption. The maximum recommended load is 15 kg. The respective support plate measures approx.150 x 180 mm and the stable steel stands have an individual weight of 3 kg.
Original Colour by Producer: White
Material: Steel
Type: Stand
Base Dimensions: 195 mm x 214 mm
Package Quantity (pcs): 2
Height Adjustable: No
Net Weight (kg): 3.41
Load Capacity: 15 kg
Made in: Germany
Colour: White
Panel Surface: 150 mm x 180 mm…

Versatile speaker stand with compact dimensions. The height adjustment of the special aluminium stand ranges from 990 to 1,430 mm. With the appropriate accessories, this unique stand is also designed for heavy studio monitors and other applications. The transport dimensions, the small footprint and the durable powder coating finish prove to be useful features.
Type: Stand
Diameter (mm): 35.0
Weight: 1,8 kg
Minimum Height: 990 mm
Load Capacity: 30 kg
Colour: Black
Maximum Height: 1430 mm
Diameter: 35 mm
Material: Aluminium
Made in: Germany

Multifunctional stand adapter for mounting on stands with ø 35 mm extension tubes. The adapter can be adjusted to an inclination of +60° to -30°. The fixation follows by means of an adjustable clamping lever. The adapter plates 19615, 19616 and 19617 can be used to mount a wide variety of screens up to a mounting hole pattern of VESA 200 x 200 mm. The adapter plates 24352 to 24359 are suitable for accommodating a large number of loudspeaker cabinets.
Weight: 0,9 kg
Made in: Germany
Colour: Black
Load Capacity: 25 kg

A decorative space saving speaker stand. The heavy cast iron plate with a relatively small diameter requires little space. The tried-and-tested spring-loaded bolt with locking screw makes height adjustment easy and safe. The stand has a maximum pull-out height of 1800 mm and is suitable for speakers with a maximum weight of 30 kg. The integrated mounting aid simplifies mounting the loud speaker cabinets. Base diameter: 450 mm. Height: from 1,100 to 1,810 mm. Height adjustment: spring-loaded bolt and locking screw. Leg construction: round cast-iron base. Material: steel. Rod combination: 2-piece folding design. Tube end diameter: 35 mm. Weight: 10,44 kg. Finish: Black
Colour: Black
Made in: Germany<&hellip;

Table monitor stand. Features: The height adjustment is variable between 167 and 254 mm. 4 rubber pads each for floor and tray provide for stability and noise filtration. The recommended max. load is 15 kg. The support area (tray) dimensions are 230 x 250 mm. Material: steel. Colour: Black.
Made in: Germany

A patented expanding mandrel with quick-release fastener ensures a tight fit of the speaker cabinet. The plastic expansion splints ensure a vibration-free connection between the speaker cabinet and the tube. The height of the steel stand ranges from 1,417 to 2,117 mm, is fixed with a safety hook and secured by a clamping screw for a vibration-free and firm fit. Other features include a pull-out guard for the extension tube, an integrated shock absorber and durable powder coating.
Material: Steel
Made in: Germany
Weight: 6 kg
Diameter: 37 mm;35 mm
Minimum Height: 1417 mm
Colour: Black
Load Capacity: 50 kg
Maximum Height: 2117 mm

The modern studio monitor stand with a tiltable tray and a metal tripod base provides for stability and functionality. The three felt covered studs ensure noise filtration. The adjustments for the monitor tray include a 12.5° angle and 45 mm in depth. The stop angle of the tray provides additional safety. The height is adjusted by a clamping lever and ranges from 800 to 1300 mm. The gradual height adjustment to the desired positions takes place in 50 mm intervals. Product variant. 26754-000-55 - black. Data: Angle of inclination: 0° to 12.5°. Base diameter: 600 mm. Bearing plate: 257 x 230 mm. EAN: 4016842103546. Height: from 800 to 1,300 mm. Height adjustment: 10 different positions. Leg con…

Steel tube combination for use in subwoofers with M20 connection. The height is fixed with a safety hook and secured by a clamping screw for a vibration-free and firm fit. The slim design of the clamp allows space-saving transport and ensures a stylish appearance. The usable height is between 900 and 1,400 mm and is adjusted in 5 steps of 100 mm. Integrated on both sides is a patented expanding mandrel with quick-release fastener, which ensures a tight fit of the subwoofer and the satellite speaker. The plastic expanding splints also ensure a vibration-free connection between the speaker and the tube.
Minimum Height: 900 mm
Maximum Height: 1400 mm
Made in: Germany
Colour: Black
Load Capacity: &hellip;