Antifreezes & Coolants

Suitable for all cooling water systems in motor vehicles, buses and commercial vehicles. Deposits in the cooling/heating system form barriers against heat exchange, blocking the thermostat and regulating mechanisms. Add contents to the cooling water. Run the heating system. Depending on the degree of contamination let the engine run approximately 10 to 30 minutes. Drain the cleaner and flush out the cooling system with water. Item Package Dimension: 19.0cm L x 5.3cm W x 5.3cm H

The ideal products Durability robustness

Optimised for performance car engines primarily fabricated from aluminium plus some steel and copper components.To be competitive racing teams have to push their engines to the limit. This means delivering the greatest amount of fuel possible, without overheating the engine. Efficient heat dissipation is often compromised because water-based coolants boil inside the block, sometimes leading to catastrophic engine failure. Power Cool 180°C has a much higher boiling point than water or water-based coolants and ensures the heat-energy is always being removed, no matter what the load. This enables tuners to squeeze the maximum BHP from their engines.Please Note: If switching to Evans Waterless

Exopro long life red is a universal ethylene Glycol based coolant with antifreeze designed to last 5 years between changes. It uses O.A.T (Organic Acid Technology) and is suitable for all year round use in automotive and commercial vehicles. Lasts 5 years between changesProtects against freezing up to -56° CProtects engine and coolant system internals against corrosion Use neat or dilute to desired mix with waterFree from nitrates, amines, phosphates, borates ans siliconesO.A.T (Organic Acid Technology) basedUsed neat Exopro long life red antifreeze coolant protects against freezing down to -56° C. It can be diluted with water and at an 80/20 coolant to water mix it can protect to -38°

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Height or Thickness: 17 mm. Outer Diameter: 49 mm. Outside Thread: M44 x 3. Thread Mode: left-hand thread. Fitting Side: rear axle left. Weight: 0,210 kg OE numbers (for comparison purposes only): Chrysler 05134635AA. Dodge 05134635AA. Mercedes Benz PKW 902 357 01 26 among others suitable for: Dodge: Sprinter

Ready to use Protection from -20° to +110° Anti-freezing

MOTUL AUTO COOL OPTIMAL ULTRA is a concentrated long life antifreeze that should be mixed withsoft water for immediate use as a cooling liquid, based on monoethyleneglycol, using an Organic AcidTechnology (OAT) additivation named Organic Tech.Strongly recommended for all cooling systems: passenger cars, heavy duty, construction andagriculture vehicles, gardening, ships, stationary engines.

Motul Auto Cool G13 Ultra is a concentrated antifreeze that must be mixed soft water for immediate use as a cooling liquid, based on monoethylene glycol and glycerol, using lorbid additives technology. Especially recommended for cooling systems of VAG group passenger cars and light duty vehicles when coolant meeting requirements of G13 standard (TL 774 J) is required.

Suitable for all cooling and heating systems. Compatible with all standard cooling stabilisers and anti-freeze. 1 litre is enough for up to 50 litres of coolant. For professionals only! Deposits in the cooling/heating system form barriers against heat exchange, blocking the thermostat and regulating mechanisms. Suitable for all cooling water systems in motor vehicles, buses and commercial vehicles. Add contents to the cooling water. Run the heating system. Depending on the degree of contamination let the engine run approximately 10 to 30 minutes. Drain the cleaner and flush out the cooling system with water.

Motul Auto Cool G13 Ultra is a concentrated antifreeze that must be mixed soft water for immediate use as a cooling liquid, based on monoethylene glycol and glycerol, using lorbid additives technology. Especially recommended for cooling systems of VAG group passenger cars and light duty vehicles when coolant meeting requirements of G13 standard (TL 774 J) is required.

Most new customers wanting to use Evans will need to remove the existing water based coolant from their system. To Gain the maximum benefit from Evans we recommend that no more than 3% residual water is present in the coolant. To help achieve this we have formulated a hygroscopic Prep Fluid designed to flush the system before adding Evans.How Does It Work Fill the freshly drained cooling system with Evans Prep Fluid and run the engine up to normal operating temperature. The hygroscopic fluid will absorb any residual water and flush out any loose deposits.What should I do with it then Once the Prep Fluid has been drained from the system, store it in an air tight container as it can be used

VP Racing Stay Frosty Hi performance coolant has been designed for use in high performance car and bike engines which require additional cooling protection with minimal freeze protection. Coolant temperatures can be reduced by up to 25° F (9° C) compared to traditional glycol based coolant.Ideal for high performance engines which run hotReady to use formula, simply pour inCan reduce temperatures by up to 25° F (9° C)Protects engine against corrosionStay Frosty Hi performance coolant has a special blend of wetting agents designed to optimise heat transfer from the cylinder head. It contains glycol to provide a small level of freeze protection.3.785 litre (1 US gallon) bottle

Bremssatz (2x Bremsscheibe + 4x Bremsbeläge) Bitte wählen Sie Ihre Marke und Modell im Teilefinder aus.

Product Model Number : PET7286 Product Brand : PETRONAS Products category Name : Uncategorized Detergent engines, 400 ML

Power and protection (-37°C / -35°F). Ready to use coolant. Auto Cool Optimal’s Organic technology reduces the operating temperature of the engine to maintain full power. Anti-scaling and longlasting anti-corrosion protection throughout the cooling system.

COMPATIBILITY: Concentrated anti-freeze coolant based on pure non-regenerated ethylene glycol. For cars, motorcycles and commercial vehicles cooling circuits that require premium HOAT (Hybrid Organic Acid Technology) type fluids Instructions for use: Use the product diluted with demineralized water. Diluted to 50% by volume allows a freezing point of approximately -37°C and a boiling point of approximately 108°C. Avoid mixing with fluids of different technology. Please consult the manufacturer's manual in advance MAXIMUM PROTECTION: Protects the entire cooling system (radiators, cylinders, heads and water pumps from overheating, corrosion and fouling). Suitable for both the latest generation en…

MOTUL AUTO COOL OPTIMAL ULTRA is a concentrated long life antifreeze that should be mixed with soft water for immediate use as a cooling liquid

Optimised for Pre WW2 vehicles with engines that have pre-nodular cast iron blocks and many components made from copper and brass.Vintage cars accumulate layers of internal corrosion over the years and this often leads to overheating. Vintage Cool 180°C has a much higher boiling point than water and effectively eliminates overheating, boil-over and after-boil. Many vintage car owners are concerned about changes to modern antifreeze inhibitor formulations and how effective they are at protecting vintage engines. Vintage Cool 180° is specifically formulated for Vintage engines and proven to stop corrosion and erosion. It also allows engines to operate at lower pressure, putting less stress