Antifreezes & Coolants

Motul Auto Cool G13 Ultra is a concentrated antifreeze that must be mixed soft water for immediate use as a cooling liquid, based on monoethylene glycol and glycerol, using lorbid additives technology. Especially recommended for cooling systems of VAG group passenger cars and light duty vehicles when coolant meeting requirements of G13 standard (TL 774 J) is required.

VP Racing Stay Frosty Hi performance coolant has been designed for use in high performance car and bike engines which require additional cooling protection with minimal freeze protection. Coolant temperatures can be reduced by up to 25° F (9° C) compared to traditional glycol based coolant.Ideal for high performance engines which run hotReady to use formula, simply pour inCan reduce temperatures by up to 25° F (9° C)Protects engine against corrosionStay Frosty Hi performance coolant has a special blend of wetting agents designed to optimise heat transfer from the cylinder head. It contains glycol to provide a small level of freeze protection.3.785 litre (1 US gallon) bottle

Suitable for all cooling and heating systems. Compatible with all standard cooling stabilisers and anti-freeze. 1 litre is enough for up to 50 litres of coolant. For professionals only! Deposits in the cooling/heating system form barriers against heat exchange, blocking the thermostat and regulating mechanisms. Suitable for all cooling water systems in motor vehicles, buses and commercial vehicles. Add contents to the cooling water. Run the heating system. Depending on the degree of contamination let the engine run approximately 10 to 30 minutes. Drain the cleaner and flush out the cooling system with water.

Motul Auto Cool G13 Ultra is a concentrated antifreeze that must be mixed soft water for immediate use as a cooling liquid, based on monoethylene glycol and glycerol, using lorbid additives technology. Especially recommended for cooling systems of VAG group passenger cars and light duty vehicles when coolant meeting requirements of G13 standard (TL 774 J) is required.

Optimised for Pre WW2 vehicles with engines that have pre-nodular cast iron blocks and many components made from copper and brass.Vintage cars accumulate layers of internal corrosion over the years and this often leads to overheating. Vintage Cool 180°C has a much higher boiling point than water and effectively eliminates overheating, boil-over and after-boil. Many vintage car owners are concerned about changes to modern antifreeze inhibitor formulations and how effective they are at protecting vintage engines. Vintage Cool 180° is specifically formulated for Vintage engines and proven to stop corrosion and erosion. It also allows engines to operate at lower pressure, putting less stress

It protects against frost down to -39 °C Prevents the build up of rust and limescale Does not contain nitrites, boratti, phosphates and amines environmental impact

Bremssatz (2x Bremsscheibe + 4x Bremsbeläge) Bitte wählen Sie Ihre Marke und Modell im Teilefinder aus.

Product Model Number : PET7286 Product Brand : PETRONAS Products category Name : Uncategorized Detergent engines, 400 ML

COMPATIBILITY: Concentrated anti-freeze coolant based on pure non-regenerated ethylene glycol. For cars, motorcycles and commercial vehicles cooling circuits that require premium HOAT (Hybrid Organic Acid Technology) type fluids Instructions for use: Use the product diluted with demineralized water. Diluted to 50% by volume allows a freezing point of approximately -37°C and a boiling point of approximately 108°C. Avoid mixing with fluids of different technology. Please consult the manufacturer's manual in advance MAXIMUM PROTECTION: Protects the entire cooling system (radiators, cylinders, heads and water pumps from overheating, corrosion and fouling). Suitable for both the latest generation en…

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Colour: red. Volume: 60 litre. Recommended Use: VW TL 774 D. Weight: 60 kg OE numbers (for comparison purposes only): Audi G 012 A8D A1 S3. GM/Opel Zeichnungsnr. 9163329. Opel 1940 651. Seat G 012 A8D A1 S3. Skoda G 012 A8D A1 S3. VW G 012 A8D A1 S3 among others suitable for: Audi: A2 (8Z), A3 (8L), A3 quattro (8L), A4 (8D), A4 (8E), A4 (8H), A4 quattro (8D), A4 quattro (8E), A6 (4B), A6 quattro (4B), A8 (4D), A8 quattro (4D), S3 quattro (8L), S4 quattro (8D), S6 quattro (4A), S6 quattro (4…

MOTUL AUTO COOL OPTIMAL ULTRA is a concentrated long life antifreeze that should be mixed with soft water for immediate use as a cooling liquid

This Evans waterless coolant conversion kit comprises of 7 litres of Power Cool 180 and a FREE 8 litre drain pan.Evals Power Cool 180 is optimised for performance car engines primarily fabricated from aluminium plus some steel and copper components.To be competitive racing teams have to push their engines to the limit. This means delivering the greatest amount of fuel possible, without overheating the engine. Efficient heat dissipation is often compromised because water-based coolants boil inside the block, sometimes leading to catastrophic engine failure. Power Cool 180°C has a much higher boiling point than water or water-based coolants and ensures the heat-energy is always being removed,

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Weight: 0,051 kg OE numbers (for comparison purposes only): Audi 1J0 122 291. Seat 1J0 122 291. Skoda 1J0 122 291. VW 1J0 122 291 among others suitable for: Audi: A3 (8L), A3 (8P), A3 quattro (8L), S3 quattro (8L), TT Coupe (8N), TT Coupe quattro (8N), TT Roadster (8N), TT Roadster quattro (8N). Seat: Altea (5P), Cordoba (6L), Ibiza IV (6L), Leon (1M), Leon (1P), Leon 4x4 (1M), Toledo II (1M), Toledo III (5P). Skoda: Octavia I (1U), Octavia I 4x4 (1U), Octavia II (1Z), Octavia II (93), O…

MOTUL Inugel Long Life 30% Organic Red 5L Product Type: MOTORCYCLE PART Brand: MOTUL

Optimised for Post WW2 vehicles with engines that have nodular cast iron blocks, few copper components than vintage engines, plus some aluminium components.Classic cars will very likely have built-up a layer of internal corrosion over the years and this often leads to overheating. Classic Cool 180°C's higher boiling point effectively eliminates overheating, boil-over and after-boil. Many classic car owners are concerned about modern anti-freeze inhibitor formulations and how effective they are at protecting older engines. Classic Cool 180°C is specifically formulated for classic engines and proven to stop corrosion and erosion. It also allows engines to operate at lower pressure, putting

1 Concentrate + 1 Water -37ºC 1 Concentrate + 1.5 Water -25ºC

COMPATIBILITY: Anti-freeze coolant, pre-diluted and ready to use, based on pure non-regenerated ethylene glycol. For high-performance engine cooling circuits of motorcycles, scooters, quads requiring premium HOAT (Hybrid Organic Acid Technology) fluids Instructions for use: Ready to use product that does not require further dilution in water. Allows a freezing point of approximately -37°C and a boiling point of about 108°C. Avoid mixing with fluids of different technology MAXIMUM PROTECTION: Protects the entire cooling system (radiators, cylinders, heads and water pumps from overheating, corrosion and fouling). Suitable for both the latest generation engines with aluminium alloy parts as we…

Frost protection during winter storage For all external cooling water systems of boat engines and toilet systems Prevents the cooling system from freezing Excellent corrosion protection Protects against corrosion and oxidation Biodegradable Environmentally friendly Safe wintering Saves residual emptying Compatible with all materials

Anti-Frost Windscreen conc. -60° Use: for Windscreen cleaning systems of motor vehicles. only the diluted. concentrate effective up a-60 °C

MOTUL AUTO COOL OPTIMAL ULTRA is a concentrated long life antifreeze that should be mixed with soft water for immediate use as a cooling liquid