Antifreezes & Coolants

Antifreeze for windscreen wiper model DIESEL ANTI-FRIST ML 250

Principle: chemical reaction in the presence of air and water forms plug suitable for metallic radiators corrosion protection: yes long-term effect International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Protection up to -40°C. (freezing point -38ºC) Diluted to 50%. Ready for direct use. Colour: Red TIP ON ITS USE: Follow the manufacturer's recommendations for proper use of the product. For filling operations can make direct use. DO NOT MIX the product of different brands and origins.

1 Concentrate + 1 Water -37ºC 1 Concentrate + 1.5 Water -25ºC

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Height or Thickness: 17 mm. Outer Diameter: 49 mm. Outside Thread: M44 x 3. Thread Mode: left-hand thread. Fitting Side: rear axle left. Weight: 0,210 kg OE numbers (for comparison purposes only): Chrysler 05134635AA. Dodge 05134635AA. Mercedes Benz PKW 902 357 01 26 among others suitable for: Dodge: Sprinter

Suitable for all cooling and heating systems. Compatible with all standard cooling stabilisers and anti-freeze. 1 litre is enough for up to 50 litres of coolant. For professionals only! Deposits in the cooling/heating system form barriers against heat exchange, blocking the thermostat and regulating mechanisms. Suitable for all cooling water systems in motor vehicles, buses and commercial vehicles. Add contents to the cooling water. Run the heating system. Depending on the degree of contamination let the engine run approximately 10 to 30 minutes. Drain the cleaner and flush out the cooling system with water.

MOTUL Inugel Long Life 30% Organic Red 5L Product Type: MOTORCYCLE PART Brand: MOTUL

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Material: Plastic. Weight: 0,05 kg. Connection Diameter: 33,3 mm. Connection Diameter: 12,6 mm OE numbers (for comparison purposes only): GM/Opel Zeichnungsnr. 91160216. Opel 4409 180. Renault PKW 82 00 561 420. Vauxhall 91160216 among others suitable for: Dacia: Duster, Logan. Renault: Clio II, Duster, Duster 4x4, Espace III, Espace IV, Kangoo I, Kangoo I 4x4, Laguna I, Laguna II, Logan I, Logan II, Lutecia, Megane I, Megane II, Megane Scenic I, Scenic I, Scenic I 4x4, Symbol I. Opel: Vi…

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Weight: 0,127 kg OE numbers (for comparison purposes only): Volvo LKW 273983 among others suitable for: Volvo LKW: B12, F12 240, F12 290, F12 310, F12 320, F12 330, F12 360, F12 370, F12 380, F12 390, F12 400, F12 410, N12 290, N12 310, N12 330, N12 350, N12 370, N12 385, NL12 290, NL12 360, NL12 400, NL12 410

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Height or Thickness: 17 mm. Outer Diameter: 69 mm. Internal Thread: M44 x 3. Thread Mode: right-hand thread. Fitting Side: rear axle right. Weight: 0,210 kg OE numbers (for comparison purposes only): Chrysler 05134634AA. Dodge 05134634AA. Mercedes Benz PKW 902 357 02 26 among others suitable for: Dodge: Sprinter

Shell Antifreeze LongLife Concentrate is a concentrated product and should be diluted for use with good quality water. For optimum performance distilled or deionized water is used.

Most new customers wanting to use Evans will need to remove the existing water based coolant from their system. To Gain the maximum benefit from Evans we recommend that no more than 3% residual water is present in the coolant. To help achieve this we have formulated a hygroscopic Prep Fluid designed to flush the system before adding Evans.How Does It Work Fill the freshly drained cooling system with Evans Prep Fluid and run the engine up to normal operating temperature. The hygroscopic fluid will absorb any residual water and flush out any loose deposits.What should I do with it then Once the Prep Fluid has been drained from the system, store it in an air tight container as it can be used

Millers Oils Blue Alpine Anti-Freeze Summer Coolant is a high-grade solution designed to protect engine cooling systems from frost while preventing corrosion. Formulated with inorganic acid technology (IAT), it is compatible with cars, vans, trucks, and plant machinery, requiring only dilution with water to achieve optimal performance and protection.For a closer look at what makes this product stand out:Inorganic Acid Technology (IAT): By harnessing inorganic acid technology that surpasses the rigorous standards of BS 6580 (2010), this coolant delivers unparalleled corrosion protection for critical engine parts, ensuring your engine operates smoothly and remains reliable over time.Corrosion