Antifreezes & Coolants

Suitable for all cooling and heating systems. Compatible with all standard cooling stabilisers and anti-freeze. 1 litre is enough for up to 50 litres of coolant. For professionals only! Deposits in the cooling/heating system form barriers against heat exchange, blocking the thermostat and regulating mechanisms. Suitable for all cooling water systems in motor vehicles, buses and commercial vehicles. Add contents to the cooling water. Run the heating system. Depending on the degree of contamination let the engine run approximately 10 to 30 minutes. Drain the cleaner and flush out the cooling system with water.

Most new customers wanting to use Evans will need to remove the existing water based coolant from their system. To Gain the maximum benefit from Evans we recommend that no more than 3% residual water is present in the coolant. To help achieve this we have formulated a hygroscopic Prep Fluid designed to flush the system before adding Evans.How Does It Work Fill the freshly drained cooling system with Evans Prep Fluid and run the engine up to normal operating temperature. The hygroscopic fluid will absorb any residual water and flush out any loose deposits.What should I do with it then Once the Prep Fluid has been drained from the system, store it in an air tight container as it can be used

Motul Radiator Clean removes deposits in the entire cooling circuit caused by operating conditions Motul Radiator Clean dissolves and removes scale and radiator sludge Motul Radiator Clean cleans the complete cooling system Motul Radiator Clean improves heating and cooling performance Motul Radiator Clean improves the performance of valves, thermostats and water pumps Motul Radiator Clean is designed to be used in all types of Gasoline and Diesel engines

-Use the product diluted with demineralized water. -Diluted to 50% by volume, allows a freezing point of about -2 ° C and a boiling point of about 108 ° C. -Avoid mixing with fluids of different technology. ASTM D3306,ASTM D4985,ASTM D6210,BS 6580:2010,AFNOR NF R15-601,SAE J1034,CUNA NC 956-16 NATO S 759 VW/TL 774-D/F (SFU G12/G12+),MB 325.3,MAN 324 SNF,MTU MTL 5048

MOTUL AUTO COOL OPTIMAL ULTRA is a concentrated long life antifreeze that should be mixed with soft water for immediate use as a cooling liquid

Optimised for Post WW2 vehicles with engines that have nodular cast iron blocks, few copper components than vintage engines, plus some aluminium components.Classic cars will very likely have built-up a layer of internal corrosion over the years and this often leads to overheating. Classic Cool 180°C's higher boiling point effectively eliminates overheating, boil-over and after-boil. Many classic car owners are concerned about modern anti-freeze inhibitor formulations and how effective they are at protecting older engines. Classic Cool 180°C is specifically formulated for classic engines and proven to stop corrosion and erosion. It also allows engines to operate at lower pressure, putting

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Material: Plastic. Weight: 0,05 kg. Connection Diameter: 33,3 mm. Connection Diameter: 12,6 mm OE numbers (for comparison purposes only): GM/Opel Zeichnungsnr. 91160216. Opel 4409 180. Renault PKW 82 00 561 420. Vauxhall 91160216 among others suitable for: Dacia: Duster, Logan. Renault: Clio II, Duster, Duster 4x4, Espace III, Espace IV, Kangoo I, Kangoo I 4x4, Laguna I, Laguna II, Logan I, Logan II, Lutecia, Megane I, Megane II, Megane Scenic I, Scenic I, Scenic I 4x4, Symbol I. Opel: Vi…

Exopro long life red is a universal ethylene Glycol based coolant with antifreeze designed to last 5 years between changes. It uses O.A.T (Organic Acid Technology) and is suitable for all year round use in automotive and commercial vehicles. Lasts 5 years between changesProtects against freezing up to -56° CProtects engine and coolant system internals against corrosion Use neat or dilute to desired mix with waterFree from nitrates, amines, phosphates, borates ans siliconesO.A.T (Organic Acid Technology) basedUsed neat Exopro long life red antifreeze coolant protects against freezing down to -56° C. It can be diluted with water and at an 80/20 coolant to water mix it can protect to -38°

Cartons

Motul Auto Cool G13 Ultra is a concentrated antifreeze that must be mixed soft water for immediate use as a cooling liquid, based on monoethylene glycol and glycerol, using lorbid additives technology. Especially recommended for cooling systems of VAG group passenger cars and light duty vehicles when coolant meeting requirements of G13 standard (TL 774 J) is required.

Lid leak Radiator 150 ml

Petrol Injector Cleaner, 250 ml Country of Origin: United States Model number: PET9051 The package dimension of the product is: 20"L x10"W x20"H

Motul Auto Cool G13 Ultra is a concentrated antifreeze that must be mixed soft water for immediate use as a cooling liquid, based on monoethylene glycol and glycerol, using lorbid additives technology. Especially recommended for cooling systems of VAG group passenger cars and light duty vehicles when coolant meeting requirements of G13 standard (TL 774 J) is required.

Optimised for performance car engines primarily fabricated from aluminium plus some steel and copper components.To be competitive racing teams have to push their engines to the limit. This means delivering the greatest amount of fuel possible, without overheating the engine. Efficient heat dissipation is often compromised because water-based coolants boil inside the block, sometimes leading to catastrophic engine failure. Power Cool 180°C has a much higher boiling point than water or water-based coolants and ensures the heat-energy is always being removed, no matter what the load. This enables tuners to squeeze the maximum BHP from their engines.Please Note: If switching to Evans Waterless

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Weight: 0,127 kg OE numbers (for comparison purposes only): Volvo LKW 273983 among others suitable for: Volvo LKW: B12, F12 240, F12 290, F12 310, F12 320, F12 330, F12 360, F12 370, F12 380, F12 390, F12 400, F12 410, N12 290, N12 310, N12 330, N12 350, N12 370, N12 385, NL12 290, NL12 360, NL12 400, NL12 410

VP Racing Stay Frosty Hi performance coolant has been designed for use in high performance car and bike engines which require additional cooling protection with minimal freeze protection. Coolant temperatures can be reduced by up to 25° F (9° C) compared to traditional glycol based coolant.Ideal for high performance engines which run hotReady to use formula, simply pour inCan reduce temperatures by up to 25° F (9° C)Protects engine against corrosionStay Frosty Hi performance coolant has a special blend of wetting agents designed to optimise heat transfer from the cylinder head. It contains glycol to provide a small level of freeze protection.3.785 litre (1 US gallon) bottle

Use instructions: Do not mix with other liquids, in order to maintain good protective properties. If water is added, it is better that it is demineralised water in order to protect the metals. For direct use. Specifications: UNE 26-361. SAE J814 / 1034. BS 6580. USA O-A548 and JIS2234.

Ready-to-use Gemisch ethylene glycol-based with a complex inhibitors Package (Oat technology) that has been developed especially for modern aluminium high performance engines. The product is parchment divider, nitrite, phosphate, and Silikatfrei and provides an excellent protection against frost, rust or overheating. This results in a secure vehicle operation for year-round use. For all cooling systems and engines aluminium high performance motors in the Cars, commercial vehicles, motorcycles, buses, agricultural machinery and stationary motors and devices that require a cooling system protection this quality. - Item number: 6924

Ready to use Protection from -20° to +110° Anti-freezing

Motul Auto Cool G13 Ultra is a concentrated antifreeze that must be mixed soft water for immediate use as a cooling liquid, based on monoethylene glycol and glycerol, using lorbid additives technology. Especially recommended for cooling systems of VAG group passenger cars and light duty vehicles when coolant meeting requirements of G13 standard (TL 774 J) is required.

Most new customers wanting to use Evans will need to remove the existing water based coolant from their system. To Gain the maximum benefit from Evans we recommend that no more than 3% residual water is present in the coolant. To help achieve this we have formulated a hygroscopic Prep Fluid designed to flush the system before adding Evans.How Does It Work Fill the freshly drained cooling system with Evans Prep Fluid and run the engine up to normal operating temperature. The hygroscopic fluid will absorb any residual water and flush out any loose deposits.What should I do with it then Once the Prep Fluid has been drained from the system, store it in an air tight container as it can be used

Original febi bilstein spare part - Solutions „Made in Germany" Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed! Height or Thickness: 17 mm. Outer Diameter: 69 mm. Internal Thread: M44 x 3. Thread Mode: right-hand thread. Fitting Side: rear axle right. Weight: 0,210 kg OE numbers (for comparison purposes only): Chrysler 05134634AA. Dodge 05134634AA. Mercedes Benz PKW 902 357 02 26 among others suitable for: Dodge: Sprinter