Pliers

8000 For retaining rings as per DIN 472, DIN 984 DIN 5256 Form C Straight tips Forged GEDORE chrome-vanadium special hardened and tempered steel Precision machined, oil hardened and annealed Black, with blue dipped handles

The Bahco 2471G Flat Nose Pliers are made from alloyed steel with a lacquered and polished finish for increased protection against rust. Fitted with high performance, two-component handles for increased comfort. Conform to ISO 5745.Additional Information:• Type: Flat Nose• Size: 160mm• Handle: Dual Component

Reinforced type, for tough continuous operations Lay-on cutter box For flat and round material For medium-hard wire 1.6 mm Induction-hardened precision cutting edges, hardness 62 - 64 HRC GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed JC = chrome-plated, with 2-component handles TL = steel-grey, with blue dipped non-slip handles TL = steel-grey, with blue dipped non-slip handles

Combination Pliers

70 01 180 SB Diagonal CutterThe indispensable diagonal cutter for all-round use. High-quality material and precise workmanship for long service life. Precision cutting edges for soft and hard wire. Clean cutting of thin copper wires, also at the cutting edge tips. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Narrow head style for use in confined areas. self-service card/blister. Cutting capacities soft wire (diameter): Ø 4.0 mmCutting capacities medium hard wire (diameter): Ø 3.0 mmCutting capacities hard wire (diameter): Ø 2.5 mm

Bahco Combination Pliers with ERGO™ handles that can be used for both holding and cutting. The jaws are slimmer than standard products, have smooth rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand. These pliers are also fitted with a return spring which can be engaged or disengaged in an instant.These Bahco Combination Pliers have the …

Knipex 0822145 Needle-Nose Combination Pliers 145mm The Knipex 0822145 Needle-Nose Combination Pliers are good for everyday use, good when out and about. Pulling a nail out of the wall or holding a nail to drive it in, cutting wire, pulling out the locking pin on a door handle, tightening the Bowden cable on a bike - there are several occasions when the needle nose combination pliers from Knipex prove to be a useful everyday helper. They are ideal for working in inaccessible places due to the slim head design. Small components such as pins, bolts and nails are held securely and safely in the milled groove in the handle area. Knipex has developed the 08 22 145 to be reliable, versatile needle …

74 01 160 SB High Leverage Diagonal CutterFor very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire. self-service card/blister. Cutting capacities medium hard wire (diameter): Ø 3.4 mmCutting capacities hard wire (diameter): Ø 2.5 mmCutting capacities piano wire (diameter): Ø 2.0 mm

Circlip Pliers / 140 mm Length

99 01 300 CONCRETERS NIPPERS300mm by Knipex

The Knipex 99 14 250 SB concreters nippers offer high leverage transmission for the most demanding applications They require 25% less effort compared to conventional concreters' nippers of the same size and are zinc plated for excellent corrosion resistance and long life. They are typically suited to cutting different types of wire and do so with ease. Sold with hang tab packaging as shown in picture. Features:
- 25% less effort required compared to conventional concreters' nippers of the same size
- Extra-slim form for tying deep mounted steel rods
- To lace concrete reinforcing steel with binding wire from a roll
- Wire is twisted and cut in a single pass
- High-leverage joint, …

The Bahco ERGO™ Side Cutting Pliers are made from high-performance steel, with a black anti-corrosion finish and edges which are induction hardened at 62 HRC. They have 2-component combination handles - thermoplastic surface on tough polypropylene which gives a superior grip. Progressive edges allow the cutting radius along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper and plastic insulated wire at the tip. The screw joint provides excellent running and accurate alignment of the cutting edges. The distance from the joint to the centre of the cutting edges is reduced, giving greater leverage and increased cutting capacity. The round …

Circlip Pliers

Electronic Super Knips are precision pliers for ultra fine work with a smooth movement for minimum operator fatigueThe Knipex 7861125SB (Carded) Electronic Super Knips are 125mm in length and have extremely sharp cutting edges made of induction hardened special tool steel. The cutting edges are ground without bevel for flush cutting and are induction hardened to approx. 64 HRC. Suited to accurately cutting fine wires, e.g. that are touching enclosures and components, thanks to precision tips. Great dexterity is needed when working on electronic components and in precision mechanics. Due to its frictionless handle spring, the Knipex Electronic Super Knips are so smooth-running that energy can …

Stanley MR55 All steel riveter with an easy spring-loaded handle, which ejects the rivet stem. It has 4 nosepieces and a wrench store in the handle for versatility and convenient storage and accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications. Rugged steel construction for long-lasting durability.Additional Information:• Tool/Spares: Rivet Tool• Type: Fixed Head

8000 For retaining rings as per DIN 472, DIN 984 DIN 5256 Form C Straight tips Forged GEDORE chrome-vanadium special hardened and tempered steel Precision machined, oil hardened and annealed Black, with blue dipped handles

Universal model with slimline head, ideal for confined spaces Induction-hardened precision cutting edges, hardness 62 - 64 HRC For flat and round material For medium-hard wire, 1.6 mm GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed JC = chrome-plated, with 2-component handles TL = steel-grey, with blue dipped non-slip handles TL = steel-grey, with blue dipped non-slip handles

Bahco Side Cutting Pliers for cutting hard materials such as piano wire, copper wire and plastic insulated wire. They are made form high performance alloy steel and have two-component handles for comfort.Length: 160mm (6 1/4 in). Cutting capacity:2.5mm.Additional Information:• Size: 160mm (6.1/4in)• Handle: 2-Component

Features:- Multifunction universal pliers.- American pattern.- For clamping, gripping, bending and cutting jobs.- To cut hard and soft wires.- Induction hardened cutting edges.- With slot to hold nails and wire.- Grip zones for flat and round materials.- Asymmetrical internal jaws for a better grip on the workpiece.- Integrated star key.Optimum lever action power transmission for easy and effortless work.- VDE, ergonomic and non-slip 2-component SoftGripp handles according to DIN EN / IEC 60900.- Made of special tool steel, forged, oil-hardened.- Matte chrome head finish.Specifications:- Length (mm): 180- Ø cutting semi-hard wire 750 N/mm² (mm): 3.4- Ø cut soft wire 220 N/mm² (mm): 5.2- Ø Al…

Knipex 70 02 160 SB Diagonal Cutter 160mm The Knipex 7002160SB is the indispensable diagonal cutter for all-round use. It features a polished head with elongated cutting edges and handles with multi-component grips. Features:
- High-quality material and precise workmanship for long service life
- Precision cutting edges for soft and hard wire
- Clean cutting of thin copper wires, also at the cutting-edge tips
- Cutting edges additionally induction hardened, cutting edge hardness approx. 62 HRC
- Narrow head style for use in confined areas
- Vanadium electric steel, forged, multi stage oil-hardened Specification:
- Part number: 70 02 160
- Head: polished
- Handles: with multi-component …

Features: - Precision cutting edge for piano wire (D2 quality)- Cutting edges inductively hardened- Power transmission with optimum leverage for easy and effortless work- Handles with ergonomically shaped SoftGripp multi-component sleeves- Made of special tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 180- Length in inches: 7- Cutting edge shape: Flush Cut- nail, wire nail - cutting value in millimetres: 3,7- Hard wire - 1800 N/mmí_ wire rope fibre, steel rope - cutting value in millimetres: 2,6- Piano wire - 2300 N/mmí_ spring steel wire - cutting value in millimetres: 2,2- DIN standards - National, European and worldwide: DIN ISO 5749- Weight in Grams: 245

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40 and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles. Length 200mm (8 in). Hard wire diameter 2.2 mm. Medium wire diameter 3.2 mm.

Circlip Pliers / 210 mm Length

Cable Shears / 165 mm Length