Other car electronics

Product Name:Car Key Shell Key Blade: no（no Blade） Logo : No Transponder Chip: No Electronics/Battery: No Features: 1.Best replacement for a key with broken buttons or worn key shell. 2. Key shell only.No electronic internals. 3. Swap the blade with your original. 4.Take the internal electron(include immobilizer/transponder chip) from original remote and place them to new key shell,then Profit! Fitment:(Key shell only .No electronic internals. ) for Toyota Prado 2002 - 2009 for Toyota Corolla 2001 - 2007 for Toyota Echo 1999 - 2005 for Toyota Tarago 2000 - 2006 for Toyota Alphard 2003 - 2005 for Toyota MR2 (12/1999- 09/2005) for Toyota HiAce (08/2001 - 05/2006)

Features: 1. Sharp steel probes can easily pierce wire insulation to check circuits. 2. The probe pen is ideal for checking circuits, fuses, switches and wiring in cars, trailers, boats, motorcycles and other low voltage systems. 3. Ground the alligator clip and test the circuit with a probe. When the light is on, there is electricity. instructions: 1. Clip the measured alligator clip to the ground wire (such as the metal or negative pole of the car) 2. Measure the conductive metal in the test circuit with the needle of the electric pen 3. If the light bulb of the stylus will light up, it means that the measured point has formed a circuit and works normally. On the contrary, there is a

Description Coin type spark plug gap measuring tool High accuracy by die-casting process Features easy-to-read, clear scale Heavy-duty construction ensures strength and durability Specification Material: solid alloy steel color:as the picture Size: 37 mm in diameter Measuring range: 0.60-2.4 mm Function: Round hole can be used to adjust the spark plug gap, can also be hung on the key ring How to use: Insert the edge of the coin into the ignition gap of the spark plug and move it to just the right position to catch Package includes: 1×spark plug gap measuring tool

Description: 100% brand new and high quality Material:Copper (Nickel plating) Color: as shown in pic Features: 1.the unique long-life light tube, not produce heat, comfort and safety. 2.lnnovative flexible wire lead has good tensile strength. 3.small volume, compact structure, equipped with a clip, convenient to carry and use Tester Length: (Approx) 10.6cm Cable Length (Unstretched): 62cm Testing Range: DC 6V-12V-24V Quantity:1PC Note: You must not operate this tester beyond its testing range. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1x Auto Circuit Tester

color: black Communication: Wireless Support Memory Card: no Connectors: USB

Material: Copper Specification: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Cable Length: 60cm/23.62" (Approx.) To test fuses and light sockets (break lights, back-up lights, etc). 1 x Voltage Tester Ideal for car, boats, motorcycles and small engines. Size: 10.4cm x 1cm/4.09" x 0.39" (Approx.) Package Include: Test Range: DC 6V - 24V Can help you find broken and live wires. Type: Voltage Tester Note: With grounding wire connected to handle. Array

Highlights For ELM327 V2.1: ELM327 MINI OBD SCAN is the newly developed wireless scan tool. It supports most standard OBD-II protocols Hardware V2.1,Software V2.1 Bluetooth Password :0000 / 1234 / 6789 Woks on Android Torque (support Android smart phone System with Android 4.0-Android 4.4 version) /PC( win XP/WIN 7 32bits and close anti-virus programm),BUT IT NO WORKS iOS! It CAN'T support for Diesel or Trucks. This ELM327 V2.1 supports most of OBD-II protocols cars,but it can not do all models ,also some OBDII protocols may do not support( like J1850 VPW &J1850 PWM protocols no supports). Hardware V2.1 Supprots 7Protocols:

ST-LINK V2 Simulator Download Programming Mini STM8/STM32 Simulator Download Programmer Programming LED Indicator Random Color Feature: 1. Convenient and Reliable: The ST-LINK V2 is built with an aluminum alloy USB flash drive casing that's both portable and sturdy. It also has clear interface definitions marked directly on the casing for easy use. 2. Voltage: This programmer provides both 5V and 3.3V external power supplies, making it compatible with a variety of target boards. 3. Laser-Etched Lettering: The lettering on the casing is laser-etched, ensuring it won't fade or peel off. This ensures permanent clarity and usability. 4. Built-In Fuse: The internal mainboard comes with

Very glad to see you in my shop. Featura： 1、Automotive Circuit Tester Used to Check Electrical Circuits and Accessories on All 6V12V24V Systems. 2、Automotive Circuit Tester with Great Flexibility, Rang and Freedom, Innovative Elastic Test Lead has Good Tensile Capacity, you can Stretch when Using and Then it will Automatically Retracts. 3、Automotive Circuit Tester with Heavy Duty Ground Clip and Insulator Allows you to Quickly and Easily Check the Circuit While Ensuring your Safety. 4、Automotive Circuit Tester is a simple and useful tool. If you are trying to diagnose and solve an electrical problem, sometimes a test light can help you rule out possible causes much quicker

Description: Made of copper. Test range: DC 6V-24V. Can help you find broken and live wires. To test fuses and light sockets (break lights, back-up lights, etc). Ideal for auto, boats, motor cycles and small engines. With grounding wire connected to handle. Size:10.4x1cm(approx) Cable length:60cm(approx) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Packages: Voltage Tester x 1

Newly developed bluetooth ELM327,support all OBD-II protocols as follows: ISO15765-4 (CAN); ISO14230-4 (KWP2000) ISO9141-2 Function: 1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). 2.Clear trouble codes and turn off the MIL ("Check Engine" light) 3.Display current sensor data, including: 4.Engine RPM 5.Calculated Load Value 6.Coolant Temperature 7.Fuel System Status 8.Vehicle Speed 9.Short Term Fuel Trim 10.Long Term Fuel Trim 11.Intake Manifold Pressure 12.Timing Advance 13. Intake Air Temperature 14.Air Flow Rate 15.Absolute Throttle Position 16.Oxygen sensor voltages/associated

Purpose: After connecting the Bluetooth Elm327 to the on-board computer hardware in the car, use OBD-II free software to get the information you need from the on-board computer. Software support platform: Windows XP, Windows 7/8, Android, Symbian, WP7, PC and other systems. Compatible software: Window: ScanMaster-ELM, ScanTool.net, PCMSCAN ELM, etc. Android: Torque, DashCommand, OBD car doctor, car doctor, mini OBD, EOBD, etc. Saipan: OBDScope Mini OBD2 Bluetooth scanner function: 1. Read the error diagnosis code-general and manufacturer-specific, and display its meaning (the database has more than 3000 general code definitions) 2. Clear the error code and turn off the MIL ("Check Engine"

Specification: ELM327 MINI OBD SCAN is the newly developed wireless scan tool. It supports most standard OBD-II protocols Hardware V2.1, Software V2.1 Bluetooth Password :0000 / 1234 / 6789 Works on Android Torque (support Android smartphone System with Android 4.0-Android 4.4 version) /PC( win XP/WIN 7 32bits and close anti-virus program), BUT IT NO WORKS iOS! It CAN'T support Diesel or Trucks. This ELM327 V2.1 supports most of the OBD-II protocols cars, but it can not do all models, also some OBDII protocols may do not support( like J1850 VPW &J1850 PWM protocols no support). Hardware V2.1 Supprots 7Protocols: 1.ISO9141-2(5 baud init,10.4Kbaud) 2.ISO14230-4 KWP(5 baud

Features: LED display cigarette lighter electric voltage meter for auto car battery. Car battery voltage display. Powered by car cigarette lighter charger (DC 12~24 V). Installation: Insert the jack of the product into a cigar socket. This digital gauge displays the voltage of batteries in the car. With the high brightness of the LED(light-emitting diode), there is no difficulty in seeing the display. Installation: Clean the cigar socket. Insert the jack of the product into a cigar socket. Description: Display Type: Digital Operating Temperature: -10 to +80 Celsius degree Accuracy Class: high Item Type: Battery Testers Voltage: DC12-24V When the engine running (do not drive), the LED

Features: Display current sensor data, including: Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim. Display current sensor data, including: Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel trims, Fuel System status, Fuel Pressure etc. Clear trouble codes and turn off the MIL (""""Check Engine"""" light) Operation system supports: for Android Smartphones(mobile phone, tablet), most computer system(except for Apple system), and all these device must have Bluetooth function. Vehicle Coverage: Works on

Warm Tips: 1. ELM327 V1.5 For 1992-2021 Car. 2. If you can not confirm the year of your car, please choose the V1.5 Version, it is compatible with most cars. 3. The Bluetooth ELM327 is for Android.IOS.PC. 4. Without CD. Mini OBD2 Bluetooth Scanner Functions: 1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). 2: Clear trouble codes and turn off the MIL ("Check Engine" light) 3: Display current sensor data, including: 4: Engine RPM 5: Calculated Load Value 6: Coolant Temperature 7: Fuel System Status 8: Vehicle Speed 9: Short Term Fuel Trim 10: Long Term Fuel Trim 11: Intake Manifold

Item Name: Voltage Test Pen Material: Plastic Applicable Scope: 6V-12V-24V Style: Black Wire (Extended Up to 1.2m), Spring Wire (Extended Up to 2.8m) Features: Pointed Test Probe, High Precision, Sensitive, Insulated Handle Specifications: Reach intoboxes or easily pierce wire insulation to check circuits with the sharp test probes, which can also be used in hard-to-reach areas, so you can protect your hands from any harmful substances. With pen clip and compact structure, the test pen is easy to carry and use. 6V-12V-24V widely use circuit tester, designed to check vehicles electrical circuits, automotive battery, circuit integrity and other 6-24 volt wiring and circuits. L It is

Warm Tips: 1. ELM327 V1.5 For 1992-2021 Car. 2. If you can not confirm the year of your car, please choose the V1.5 Version, it is compatible with most cars. 3. The Bluetooth ELM327 is for Android.IOS.PC. 4. Without CD. Mini OBD2 Bluetooth Scanner Functions: 1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). 2: Clear trouble codes and turn off the MIL ("Check Engine" light) 3: Display current sensor data, including: 4: Engine RPM 5: Calculated Load Value 6: Coolant Temperature 7: Fuel System Status 8: Vehicle Speed 9: Short Term Fuel Trim 10: Long Term Fuel Trim 11: Intake Manifold

Features: Multiple functions: alternator state check, battery state check, check before charge and overload display. 6-LED display, clearly present the alternator and battery state. Each color represents a state. Two test clips provide an extra guarantee for your safety, and the operation is more simple and convenient Small size, can be carried out and checked at any time. Fit car, motorcycle, etc., with 12V battery. Specifications: LED quantity: 6 (2 red, 3 green and 1 yellow) Material of wire: 0.06square millimeter copper Max. voltage and current: 12V 15A Length of wire: 27cm / 10.6in Battery tester size: 12 * 5.2 * 1.8cm / 4.7 * 2 * 0.7in Battery tester weight: 67g / 2.4oz Package size:

"The brake fluid tester pen measures the change of water content in brake oil based on the change in conductivity. It clearly shows the degree of water content through the LED. The high water content will cause the boiling point to decrease, affecting the braking performance, and also corroding the brake master cylinder and the sub-pump to cause rust and seizure. Red light indicates that the brake fluid needs to be replaced immediately, green light indicates good condition, and yellow light indicates that the condition is acceptable, but it is about to be replaced. Its operation is simple with accurate and fast testing. Specification: Product size: 150 x 25 x 25 mm/5.90 x 0.98 x 0.98""

Features: 1. check the car's quality oil brakes 2.5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate 3. Press the button to turn on, the green LED will light up. 4. Insert the tester into the tank for a second, then the results will be indicated correctly using the LEDs. 5. Testing POINT 3, DOT4, DOT5 brake fluid 6. Auto power off, Supports 1 LR03 AAA battery (not included) Indications: Green: Battery OK, i.e.: No Water Contained in the Brake Fluid Yellow: Less than 1% of Water Content in Brake Fluid Yellow/Yellow: Approximately 2% of Water Content in Brake Fluid Yellow/Yellow/Red: Approximately 3% of Water Content in Brake

Automotive Mechanics Stethoscope Engine Cylinder Diagnostic Tester Detector Vibration and noise detect is one of the normally way to find trouble in rotating machinery. Noise detect was widly used in Engine cylinder diagnostic and other industry area. Intercepting Engine or other parts noise will help us find the worn out or break down component quickly and exactly. The cylinder stethoscope basic and portable tool for detecting vehicle trouble. It will detect noise from Bearings,gears,valve,crankshaft,cylinder,gearbox... help technician find the trouble exactly. Saving time and increase efficiency during the repairing. Fit For: The stethoscope can be used in all rotary and reciprocating

Description Length of wire: 25cm Battery tester size: 12 * 5.2 * 1.8cm Material : Plastic, Copper Color : Gray Features: Generator status check. Check battery status. Battery overload indicator. 6 LED display panels, clearly showing alternator and battery status. Two test clips for safe and easy operation. Small size, light weight, easy to carry. Applicable to cars, motorcycles and so on Heavy duty insulation clamps for 12V lead-acid batteries, hardtop batteries, discharge batteries and maintenment-free batteries. Simple and safe to use, no spark. Internal has good chip, not easy to heat on the surface. LED quantity: 6 (2 red, 3 green and 1 yellow) Material of wire: 0.06square

Product Description This probe pen is ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems. Connect the alligator clamp to the ground, then take the probe to test circuit. If the indicator light is on, there is electricity. Features: Handle is made of plastic and the hardened & tempered carbon steel probe is chrome plated. The sharp steel probe easily pierces wire insulation to check circuitry. Light in handle glows when circuit connection is complete. Test a range of circuits ranging from 6V to 24V. Light weight design and super convenient to bring with. Specifications: Material: Plastic, Carbon steel Color: As