Pliers, Wire Cutters & Cable Cutters

Expert Quality, drop forged from chrome vanadium steel, hardened and tempered with additionally induction hardened cutting edges. Higher leverage is achieved by setting the fulcrum point closer to the jaw, increasing the lever moment. Lacquered finish for corrosion protection with heavy duty, soft grip handles with slip guards. Display packed.

Expert Quality, drop forged from chrome vanadium steel, hardened and tempered with additionally induction hardened cutting edges. Lacquered finish for corrosion protection with heavy duty, soft grip handles with slip guards. Display packed.

Expert Quality, drop forged from chrome vanadium steel, hardened and tempered with additionally induction hardened cutting edges. Higher leverage is achieved by setting the fulcrum point closer to the jaw, increasing the lever moment. Lacquered finish for corrosion protection with heavy duty, soft grip handles with slip guards. Display packed.

Expert Quality, for the cutting of wire rope up to a maximum diameter of 5mm and spring wire up to 1.5mm diameter. SK5 high carbon steel blades hardened, tempered and polished. Spring - loaded handles with vinyl grips and safety lock. Display packed.

Expert Quality, drop forged from chrome vanadium steel, hardened and tempered with additionally induction hardened cutting edges. Lacquered finish for corrosion protection with heavy duty, soft grip handles with slip guards. Display packed.

Expert Quality, manufactured from chrome nickel steel hardened and tempered with two hardened cutting zones - one for fine cable and the other for 6mm cable. Polished head with lacquered finish. Special non slip cushion - grip handles. Display packed.

Expert Quality, suitable for cutting mild steel to HRC20 9mm diameter and 7mm to HRC40. Bevel jaws hardened and tempered to HRC58 - 62 to give long life and good cutting capability. 30° offset chrome vanadium steel cutting jaws with fine adjustment. Plastic grips on handles. Sold loose.

Expert Quality, suitable for cutting mild steel to HRC20 9mm diameter and 7mm to HRC40. Flush cutting jaws hardened and tempered to HRC58 - 62 giving a longer life and good cutting capability. 30° offset chrome vanadium steel cutting jaws with fine adjustment. Plastic grips on handles. Sold loose.

Expert Quality, adjustable tubing cutter with diecast body, hardened steel blade and two flare groove rollers. The adjusting knob also incorporates a retractable reamer and spare cutting wheel. Display packed.

Expert Quality, suitable for cutting high tensile material up to 40 HRC. Jaws hardened to HRC 58-60 to give long life. Centre cut jaw pattern. Grips on handles. Spare jaws are available separately. Display packed with tie card.

Expert Quality, suitable for cutting high tensile material up to 40 HRC. Jaws hardened to HRC 58-60 to give long life. Centre cut jaw pattern. Grips on handles. Spare jaws are available separately. Display packed with tie card.

Heavy-duty bolt cutters suitable for cutting high tensile material up to 7mmThe Draper 12949 Centre Cut Bolt Cutters are a professional-grade tool designed to tackle demanding cutting tasks with ease. These 450mm bolt cutters boast exceptional durability and leverage, making them ideal for industrial applications and everyday use.Features:
- Featuring hardened jaws with a rating of HRC 58-60, these cutters can effortlessly handle high tensile materials up to 40 HRC, ensuring clean and efficient cuts
- The optimised centre cut jaw pattern maximises cutting power and control, allowing you to sever through even tough materials with minimal effort
- The integrated grips on the handles provide …

Expert Quality, suitable for cutting high tensile material up to 40 HRC. Jaws hardened to HRC 58-60 to give long life. Centre cut jaw pattern. Grips on handles. Spare jaws are available separately. Display packed with tie card.

Expert Quality, suitable for cutting high tensile material up to 40 HRC. Jaws hardened to HRC 58-60 to give long life. Centre cut jaw pattern. Grips on handles. Spare jaws are available separately. Display packed with tie card.

Expert Quality, suitable for cutting high tensile material up to 40 HRC. Jaws hardened to HRC 58-60 to give long life. Centre cut jaw pattern. Grips on handles. Spare jaws are available separately. Display packed with tie card.

Expert Quality, carbon steel hardened and tempered with chemically blacked finish for corrosion protection. For crimping F connectors to BNC, TNC, RG6, RG58, R58, RG59 and RG62 co - axial cable. Hex. die sizes .038, .100, .213, .256 and .324". PVC cushion grip handles for operator comfort. Display packed.

Expert Quality, compound action side cutters delivering a combination of increased power and comfort. Using the same amount of effort, the dual pivot compound action on these pliers delivers up to 60% greater cutting power compared against standard pliers. Manufactured with spring loaded chrome vanadium steel jaws, fitted with a locking latch mechanism and ergonomic soft grip handles. Display packed.

Expert Quality, made from carbon steel, Supplied with two sets of interchangeable hardened and tempered jaws. Chemically blacked finish with PVC grips. Suitable for crimping insulated terminals as follows: - red channel: 0.5 - 1.00mm, blue channel: 1.5 - 2.5mm and yellow channel: 4.0 - 6.0mm, and non - insulated crimps 1.5, 2.5, 6 and 10mm. Display packed.

Expert Quality, carbon steel hardened and tempered with chemically blacked finish for corrosion protection. For crimping RJ45, keyed and non - keyed modular plugs. PVC cushion grip handles for operator comfort. Display packed.

Expert Quality, tested to 10kV, suitable for working on live circuits of 1kV AC and 1.5kV DC. Pliers are drop forged from chrome vanadium steel correctly hardened and tempered with additionally induction hardened cutting edges. Each of the pliers have been individually tested to 10,000V for safe 1000V AC or 1500V DC live line working. Lacquered finish for corrosion protection with heavy duty, fully insulated, soft grip handles with slip guards. Screwdrivers are made with SVCM alloy steel blades which are hardened, tempered and chemically blacked. Fully insulated ergonomic soft grip handle with deep set blade sheath for total safety. Display packed in blow mould case with see - through lid.

Expert Quality, drop forged from chrome vanadium steel, hardened and tempered with additionally induction hardened cutting edges. Lacquered finish for corrosion protection with heavy duty, soft grip handles with slip guards. Display packed in blow mould case with see - through lid.

General duty plier kit, manufactured from carbon steel hardened, tempered and fully polished. Tapered serrated jaws to facilitate placement or retrieval of objects in confined spaces. PVC dipped handles. Display packed.

Forged centre cut tool steel jaws hardened, tempered and chemically blacked with carbon steel plate handles. Cuts high tensile steel up to 1.5mm, mild steel up to 3.5mm max. and soft materials, i.e.. copper, Aluminium up to 5mm max. Display packed.