Pliers NWS

Features: - For fitting internal circlips in holes- With 90íŒç angled jaws- Anti-slip, twisted precision tips- Handles coated with plastic- Made of chrome vanadium steel, forged, oil-hardenedSpecifications: - Length in millimetres: 125- Length in inches: 5- Type retaining ring: Inner Circlips- Retaining ring minimum diameter in millimetres: 8- Retaining ring maximum diameter in millimetres: 13- Tip diameter in millimetres: 0,9- Angle of the tool head: 90íŒç- Weight in Grams: 85

Features: - For cutting hard and soft wires- Also for tying steel mesh- Cutting edges inductively hardened- Power transmission with optimum leverage for easy and effortless work- Handles coated with plastic- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 180- Length in inches: 7- Cutting edge shape: Flush Cut- Soft wire - 220 N/mmí_ copper, aluminium, plastic - cutting value in millimetres: 4- Nail, wire nail - cutting value in millimetres: 3- Hard wire - 1800 N/mmí_ wire rope fibre, steel rope - cutting value in millimetres: 2,4- Weight in Grams: 265

Features: - For fitting extarnal circlips on shafts- With 90íŒç angled jaws- Anti-slip, twisted precision tips- With opening spring- Handles coated with plastic- Made of chrome vanadium steel, forged, oil-hardenedSpecifications: - Length in millimetres: 125- Length in inches: 5- Type retaining ring: Outer Circlips- Retaining ring minimum diameter in millimetres: 3- Retaining ring maximum diameter in millimetres: 10- Tip diameter in millimetres: 0,9- Angle of the tool head: 90íŒç- DIN standards - National, European and worldwide: DIN 5254 B- Weight in Grams: 95

Features: - For holding and bending- Serrated inside jaws- With long flat jaws- Handles with ergonomically shaped SoftGripp multi-component sleeves- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 160- Length in inches: 6 1/4- Jaw shape: Flat jaws- Weight in Grams: 160

Features: - For cutting wire ropes and steel wire without any burr or splaying- Cutting edge made of stainless steel- Special cutting geometry and precision cutting for a clean cut without any burrsSpecifications: - Length in millimetres: 190- Length in inches: 7 1/2- Soft wire - 220 N/mmí_ copper, aluminium, plastic - cutting value in millimetres: 6- Wire rope - 1570 N/mmí_ cutting value in millimetres: 3- Weight in Grams: 270

Long round nose pliers with long, flat jaws, non-slip Ergonomic 2-component SoftGripp handles, and titanium-colored Teflon-coated head.Features:- Special for support and bending work.- With non-slip SoftGripp 2-component handles.- Made of tool steel, forged and oil tempered.Specifications:- Length (mm): 160

Features: - For fitting extarnal circlips on shafts- With 90íŒç angled jaws- Anti-slip, twisted precision tips- With opening spring- Handles coated with plastic- Made of chrome vanadium steel, forged, oil-hardenedSpecifications: - Length in millimetres: 200 - Length in inches: 7 3/4 - Type retaining ring: Outer Circlips - Retaining ring minimum diameter in millimetres: 40 - Retaining ring maximum diameter in millimetres: 100 - Tip diameter in millimetres: 2,3 - Angle of the tool head: 90íŒç - Weight in Grams: 240

Features:- Smooth inside jaws for bending fine loops- With box-joint and opening spring- Tight-fit joint movement- Handles coated with plastic- Made of tool steel, forged, oil-hardenedSpecifications:- Length in millimetres: 130- Length in inches: 4 1/2- Jaw shape: Round jaws- Type of joint: Box-Joint- With opening spring- Weight in Grams: 50

Features: - For gripping small parts and forming wires- Smooth inside jaws, edges rounded- With box-joint and opening spring- Tight-fit joint movement- Handles coated with plastic- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 115 - Length in inches: 4 1/2 - Jaw shape: Half-round jaws - Type of joint: Box-joint - Weight in Grams: 55

Features: - American pattern- For holding, gripping, bending and cutting work- For cutting hard and soft wires- Cutting edges inductively hardened- Gripping zones for flat and round materials- Power transmission with optimum leverage for easy and effortless work- Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 205 - Length in inches: 8- Jaw shape: Flat jaws- Cutting edge shape: Flush Cut: - Soft wire - 220 N/mmí_ copper, aluminium, plastic - cutting value in millimetres: 5,9- Nail, wire nail - cutting value in millimetres: 3,8- Hard wire - 1800 N/mmí_ wire rope fibre, steel rope - cutting va…

Features:- For holding and bending- Serrated inside jaws- With long flat jaws- Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900- Made of tool steel, forged, oil-hardenedSpecifications:- Length in millimetres: 160- Length in inches: 6 1/4- Jaw shape: Flat jaws- Weight in Grams: 165

Features: - For gripping small parts and forming wires- Tips bent 45íŒç, smooth inside jaws, edges rounded- With box-joint and opening spring- Tight-fit joint movement- Handles coated with plastic- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 115- Length in inches: 4 1/2- Jaw shape: Half-round jaws- Type of joint: Box-joint- With opening spring: zange_oeffnungsfeder.png- DIN standards - National, European and worldwide: DIN ISO 9655- Weight in Grams: 50

Features:- For stripping solid, stranded or finely stranded conductors with standard insulation- With V-shaped cutting edge for wires and strands up to a max. of íëí‡ 5 mm or 10 mmí_ conductor cross section- With adjustable screw for easy adjustment to the required wire or strand diameter- With opening spring- Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900- Made of tool steel, forged, oil-hardenedSpecifications:- Length in millimetres: 160- Length in inches: 6 1/4- Cutting edge shape: Front Cutter- Cable - Al + Cu multi-wired conductor single and stranded conductor - cutting value in millimetres: 5- Cable - Al + Cu multi-wired conductor single and stranded conductor - cutt…

Features: - For holding, gripping, bending and cutting work- For cutting hard and soft wires- With cutting edge and burner hole- Cutting edges inductively hardened- Serrated inside jaws- With long flat-round jaws- Integrated ring spanner- Handles with 1000V multi-layered insulation - Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 205- Length in inches: 8- Jaw shape: Half-round jaws- Cutting edge shape: Flush Cut- Soft wire - 220 N/mmí_ copper, aluminium, plastic - cutting value in millimetres: 3,9- Nail, wire nail - cutting value in millimetres: 3,2- Hard wire - 1800 N/mmí_ wire rope fibre, steel rope - cutting value in millimetres: 2,2- Size of ring spanner in…

Features: - For gripping and bending- Serrated inside jaws- With long round jaws- Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 160- Length in inches: 6 1/4- Jaw shape: Round jaws- Design: Vde Design- Weight in Grams: 155

Features: - For holding, gripping, bending and cutting work- For cutting hard and soft wires- With cutting edge and burner hole- Cutting edges inductively hardened- Serrated inside jaws- With long, 45íŒç-angled, flat-round jaws- Integrated ring spanner- Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 205- Length in inches: 8- Jaw shape: Half-round jaws- Cutting edge shape: Flush Cut- Soft wire - 220 N/mmí_ copper, aluminium, plastic - cutting value in millimetres: 3,9- nail, wire nail - cutting value in millimetres: nail, wire nail - cutting value in millimetres: 3,2- Hard wire - 1800 N/mm…

Features: - Precision cutting edge for the finest wires- Cutting edges inductively hardened- Slim, tapered, bevelled head for very fine work- With box-joint and opening spring- Tight-fit joint movement- Handles coated with plastic- Made of special tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 115- Length in inches: 4 1/2- Cutting edge shape: Flush Cut- Soft wire - 220 N/mmí_ copper, aluminium, plastic - cutting value in millimetres: 1,2- Hard wire - 1800 N/mmí_ wire rope fibre, steel rope - cutting value in millimetres: 0,6- Piano wire - 2300 N/mmí_ spring steel wire - cutting value in millimetres: 0,4- DIN standards - National, European and worldwide: DIN ISO 9654- Wei…

Features: - Most popular shape for assembly work, trimming printed circuit boards, also for radio and telephone work- Precision cutting edge for the finest wires- Cutting edges inductively hardened- With box-joint and opening spring- Tight-fit joint movement- Handles coated with plastic- Made of special tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 115- Length in inches: 4 1/2- Cutting edge shape: Flush Cut- Type of joint: Box-joint- Soft wire - 220 N/mmí_ copper, aluminium, plastic - cutting value in millimetres: 1,2- Hard wire - 1800 N/mmí_ wire rope fibre, steel rope - cutting value in millimetres: 0,6- Piano wire - 2300 N/mmí_ spring steel wire - cutting value in …

Features: - For fitting internal circlips in holes- With 90íŒç angled jaws- Anti-slip, twisted precision tips- Handles coated with plastic- Made of chrome vanadium steel, forged, oil-hardenedSpecifications: - Length in millimetres: 290- Length in inches: 11 1/2- Type retaining ring: Inner Circlips- Retaining ring minimum diameter in millimetres: 85- Retaining ring maximum diameter in millimetres: 140- Tip diameter in millimetres: 3,2- Angle of the tool head: 90íŒç- Weight in Grams: 445

ClassicLine:- Thanks to the box-jointed precision construction, the ClassicLine has a play-free action. The oil-hardened steel is hand-forged and heat-treated in a controlled atmosphere. Precision-ground cutting edges, induction hardened, guarantee optimum cutting performance. The environmentally friendly surface, fine-honed to molecular accuracy, is a sealed, non-reflecting surface with no electro-coating but with a high resistance to corrosion.Finish 72:- The tools in the series 72 stand out because of their no-fuss designs and are the classic option amongst electronics tools. These pliers and cutters are forged from oil-hardened steel and have been a tried-and-tested favourite for many years,…

Features: - For cutting hard and soft wires- Precision cutting edge for the finest wires- Cutting edges inductively hardened -Cutting edge hardness approx 62 HRC- Power transmission with optimum leverage for easy and effortless work- Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900Specifications: - Length in millimetres: 180- Length in inches: 7- Cutting edge shape: Flush Cut- Soft wire - 220 N/mmí_ copper, aluminium, plastic - cutting value in millimetres: 7- Nail, wire nail - cutting value in millimetres: 4- Hard wire - 1800 N/mmí_ wire rope fibre, steel rope - cutting value in millimetres: 2,5- Cable - Al + Cu multi-wired conductor si…

Features: - For fitting internal circlips in holes- With straight jaws- Anti-slip, twisted precision tips- Handles coated with plastic- Made of chrome vanadium steel, forged, oil-hardenedSpecifications: - Length in millimetres: 310- Length in inches: 12 1/4- Type retaining ring: Outer Circlips- Retaining ring minimum diameter in millimetres: 85- Retaining ring maximum diameter in millimetres: 140- Tip diameter in millimetres: 3,2- Weight in Grams: 480

Features: - For gripping small parts and forming wires- Smooth inside jaws, edges rounded- With box-joint and opening spring- Tight-fit joint movement- Handles coated with plastic- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 130- Length in inches: 5 1/4- Jaw shape: Half-round jaws- Type of joint: Box-joint- Weight in Grams: 75

Features: - Smooth inside jaws for extremely precise work- With box-joint and opening spring- Tight-fit joint movement- Handles coated with plastic- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 130- Length in inches: 5 1/4- Jaw shape: Flat jaws- Type of joint: Box-joint- With opening spring: zange_oeffnungsfeder.png- DIN standards - National, European and worldwide: DIN ISO 9655- Weight in Grams: 80