Bike Accessories Park Tool

Turns the PRS-33 single arm stand into a double arm stand. Complete with clamp, sliding carriage, work tray, electric motor, power source, chain, and hardware.

Bike Tool Kit

The standard of the bike industry for over 35 years. The PRS-2 OS-2 features two Micro-Adjusting clamps to hold two bikes. The stand rotates horizontally 360 degrees, allowing one bike to be swung out of the way so the other clamp can be used for ´´rush´´ repair jobs.Features:- The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8 to 3 (23–76mm), including aero tubes- Clamps rotates 360 degrees for easy access to any part of the bike- Clamp height is adjustable from 50´´ to 62´´ (127-158cm)- Large diameter upright tubing resists flex- Bolts directly to the floor or bolts to the 118 lb. #135 base (sold separately), ensuring rock solid stability- Chrome plated- Includes #105 Aluminum Tool Tray-…

Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use.The PRS-3.3-1 features our 100-3C Adjustable Linkage Clamp, with a time-tested design and straightforward operation.FeaturesMaximum weight capacity: 120 lbs / 54 kgClamp capacity: 0.875'' to 1.625'' / 22 - 41 mm diameter tubesClamp jaws are nominally 4'' / 100 mm wideClamp height: adjustable from 50'' to 62'' / 128 - 158 cmIncludes #105 Cast Aluminum Work Tray …

Bottom Bracket Facing Tool / Use Bottom bracket face milling / Steel

Built to withstand the rigors of every day shop use, the PRS-3.2 is the stand of choice for professional mechanics around the world. #130 Repair Stand Base and FP-2 Floor Plate sold separately.Features: - Easily height adjustable from 50´´ to 62´´ (128–158cm) utilizing our proven Lock Block System- Includes #105 cast aluminum work tray- The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8´´ to 3´´ (23–76mm), including aero tubes- The clamp jaws are nominally 2.75 inches (7cm) wide- The maximum weight holding capacity of the PRS-3.2 is 120 lbs. (54kg)

DT-5.2 - Disc Brake Mount Facing Set

BX-3 -Rolling Blue Box tool case

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.The previous DT-5 can be upgraded with the new features of the DT-5.2 by purchasing the DT-5UK.Features:- Faces any IS mount, post mount, or flat mount, including low clearance chainstay mounts- Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles)Includes two facing cutters:- IS mounts- Post and flat mounts- Includes storage case

Headset Reamer / Use Head tube face milling / Steel

Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accommodate and self-center nearly any diameter wheel 16´´ to 29´´ and any tire width up to 5´´+.Features:- Both uprights move simultaneously to always keep wheel centered in the stand- Accommodates tire widths up to 5´´+- Speed knob to quickly change axle widths- Accommodates hub widths from 75mm to over 250mm with or without brake rotor mounted- Precise operation and adjustability- Built in thru-axle adaptors- Machined, welded, assembled and calibrated in our factory in St. P…

BFS-1 - Bottom Bracket Facing Set

Repair Stand

Cone Cutter / Steel

The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups.Features:- 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs- 8 installation drifts for standalone bearing installation- Organized in a convenient storage case- Full list of compatible bearing inner/outer diameters found on instructions/parts diagram

Bottom Bracket Facing Tool / Use Bottom bracket face milling / Tool Steel

HBP-1 - Hub Bearing Press

TS-2.2 - Professional Wheel Truing Stand Max Axle Width 175 mm

The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets.Features:- Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm- Slide hammer shaft is extendable from 6.5´´ (165mm) to 13´´ (233mm) for additional forc…

Repair Stand Accessory