Bike Accessories Park Tool

SW-17 - 5mm Hex Socket Internal Nipple Spoke Wrench

Economical and compact, this version of the Park Tool BBT-22 Bottom Bracket Tool is perfect for the home mechanic. The BBT-32 installs and removes Shimano® and ISIS Drive™ 20-tooth splined bottom bracket cups and features 32mm wrench flats. Park ToolBBT-22Bottom Bracket Tool Features Economical and compact, this version of the BBT-22 tool is perfect for the home mechanic The BBT-32 installs and removes Shimano and ISIS Drive 20-tooth splined bottom bracket cups Features 32 mm wrench flats Made in the USA and covered by Park Tool's legendary limited lifetime warranty

The Park CWP-7 Crank Wrench Puller is the perfect addition to any workshop. The CWP-7 is a compact crank puller workshop toolwith a built-in 8mm hex for removing crank bolts. Includes two rotating tips (11.3 mm and 16.3 mm) so it can be used to remove splined Octalink and ISIS Drive crank arms, as well as square-holed crank arms. A must have multi-fit crank puller for the home mechanic. Park ToolCWP-7 Crank Wrench Puller Features Weight - 0.5 lbs Built-in 8mm hex for efficient removal of crank bolts Two rotating tips (11.3mm and 16.3mm) and a multi-fit function for removal of several crank arms

ThePark Tool Axle Viceis used in a bench vice to hold the axle and prevent it from turning while making adjustments to a wheel's hub. Park Tool Axle Vice Features Makes working on wheel hubs much easier Fits in the jaws of a bench vice Accepts regular front or rear axles (9 and 10 mm) Jaws will open automatically when vice is opened Made in the USA and covered by Park Tool's legendary limited lifetime warranty

FR-5.2 - Cassette Lockring Tool

SW-13 - Spoke Wrench: Mavic Wheel Systems 5.5 mm and 9 mm

BBT-4 - Bottom Bracket Tool: Sachs, Campagnolo Veloce, Thun, Skf

A handy, four-way socket wrench that provides great leverage for nut and bolt removal and installation. The Park Tool MQ-1 Metric Quad Wrench features 15, 17, and 19mm forged sockets plus a 3/8" socket drive. Park ToolMQ-1Metric Quad Wrench Features No more lugging around a socket set, the Park Tool MQ-1 has all the peg-friendly sockets you need in a simple no fuss tool that's tougher than a late 90s street frame! Standard 15, 17 & 19 mm sockets plus a 3/8 inch driver for if you're using something weird Also great for busy workshops, no more hunting around for that one 17 mm socket that somebody didn't put back Solid steel construction for a long life of wrenching

The Park Tool UK-1 Utility Knife uses a locking blade. Pull the blade fully open and it will click into a locked position. The body of the knife has an indentation adjacent to the locking mechanism. At this point, push the locking mechanism away from the blade and push the knife blade closed. The Park Tool UK-1 Utility Knife uses a standard utility knife blade. To change the blade, open the knife fully. Push the knurled knob above the blade, pushing from the logo side of the knife. Pull the blade and remove it. Reverse the process to install a new blade.

The Park Tool 14mmHex Wrench is used for crank bolts of the Campagnolo® Power Torque™ crankset and on freehub bodies from Shimano® XTR® and others. Park Tool14mmHex Wrench Features The HR-14 is an L-shaped, 14 mm hex Wrench used for the removal of instant-pick-up Shimano Freehub bodies (and some other Freehubs) Suitable for XTR 970/975, XT 770/775, Saint 810, D/Ace 7850/7900 series Freehub bodies The short shaft is 50 mm and the long shaft is 260 mm for increased leverage Made from industrial quality, high torque steel Chamfered tips for a tight fit in the bolt Made in the USA and covered by Park Tool's legendary limited lifetime warranty

The three most common bolt and nut sizes are combined with the classic Park Tool 3-way “Y” body. 8mm, 9mm, and 10mm forged CR-V steel sockets. Park Tool ST-3 3-Way Socket Wrench Features The three most common bolt and nut sizes are combined with the classic Park Tool 3-way Y-body 8 mm, 9 mm, and 10 mm forged CR-V steel sockets Covered by Park Tool's legendary limited lifetime warranty

When the conditions haven't been the best and your bike arrives home looking like it has been placed behind a muck spreader there is only one thing for it, a darn good clean! There is no need to get dirt under your finger nails as the Park Bike Cleaning Brush Set has been put together for you to get your bike looking its showroom finest! With 4 brushes designed for each specific area of your bike there won't be a spot that has been untouched.Official Park Tool Brush SetGear Clean Brush, Tapered Detail Brush, Frame Cleaning Sponge / Bristle Brush, Soft Bristle Soaping BrushErgonomically DesignedDual Density Sure Grip HandlesCovered By Park's Limited Lifetime Warranty

The Park Tool TS-2TA Thru Axle Adaptors for TS2.2 and TS-2 Truing Stands allows truing stand to be used with 12mm, 15mm, 20mm, and 25mm thru axle hubs. Axles must be removed to use adaptors. Adaptors mount easily to TS-2.2 or TS-2. Park ToolTS-2TAThru Axle Adaptors for TS2.2 andTS-2Truing Stands Features Optional add on for TS-2.2 and TS 2 truing stand to Allow truing stands to be used with 1 5mm and 20 mm thru axle hubs Adaptors mount easily to TS-2.2 or TS-2 Truing Stand Made in the USA and covered by Park Tool's legendary limited lifetime warranty

ThePark Tool Hollow Tech 2 Bearing Adjuster Cap is a workshop quality tool for installing, removing and adjusting the end caps on Shimano HollowTech II cranks Park Tool Hollow Tech 2 Bearing Adjuster Cap Features Investment cast steel construction for years of hard use 8 mm Allen key socket on the rear for use with a torque wrench or 8 mm Allen key to give extra leverage when removing seized caps Recommended torque setting for crank arm adjustment cap: 0.4 - 0.7 Nm

SW-12 - Spoke Wrench: Mavic Wheel Systems 7-Spline 6.4 mm and 6-Spline 9 mm

CCW-5 - Crank Bolt Wrench, 14 mm Socket and 8 mm Hex Wrench

Specially designed, and precisely manufactured to gently adjust bent or damaged brake rotors. Each Park Tool DT-2 Rotor Truing Fork features two different slot depths laser cut from high quality stainless steel. Centered handle is vinyl dipped for comfort.

Designed and built especially for single speed bikes, the Park Tool SS-15 Single Speed Spanner is a forged, multi-purpose ride saver. Just the right size and length (17cm/7") to take along or to wrench in the garage, the SS-15 is destined to be a single speeder’s favorite. Park Tool SS-15 Single Speed Spanner Features Redesigned, now 37% lighter and even easier to bring along without cramping your style Features a 15 mm socket for axle nuts and a 15 mm open end for removing or installing pedals Super strong integrated tyre leaver for even the tightest tyre and rim combos Bottle opener included to ensure that any 'rest stops' go according to plan Covered by Park

The Park Tool MT-10 Multi-Tool is a high quality folding take-along tool that features forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation. Park Tool MT-10 Multi-Tool Features The MT-10 is a high quality, folding take-along tool Features forged aluminum side plates Hardened and plated tools Smooth ergonomic operation 3, 4, 5 and 8mm hex wrenches T25 Torx® compatible driver Combo cross/straight tip screwdriver Key ring holder 76 grams

The Park ToolHCW-11 Adjustable Cup Wrench fits slotted bottom bracket adjusting cups and cups with raised 16mm wrench flats. These are common on older English bicycles and less expensive bicycles. The opposite end has two ears that are 23mm wide and approximately 5mm wide. Park ToolHCW-11Adjustable Cup Wrench Features Double ended tools save space in the workshop 16 mm slotted and raised open end Double pin lockring end suitable for older style bottom brackets Made in the USA and covered by Park Tool's legendary limited lifetime warranty

The TL-6.3 is a set of tire levers designed to provide all the advantages of both steel and composite tire levers. The steel core with protruding tip offers the strength and leverage needed to securely engage stubborn tire beads, while the durable composite coating makes for smooth operation and will not mar sensitive rim surfaces. With its ergonomic shape and ideal size, the TL-6.3 is perfect for use as an everyday shop lever, or can be stored in a saddlebag or tool roll for the mobile mechanic.FeaturesSet of twoDimensions (each): 145 mm x 25 mm x 6 mm (5.75'' x 1'' x 0.24'')Weight (each): 46 grams (1.6 ounces) Made in: Taiwan Material: Steel;Plastic Type of Product: Wheel Tools Colour: Blue Weight …

IB-1 - I-Beam Mini Fold-Up Hex Wrench and Screwdriver Set

The standard of the industry for over 25 years. The Park Tool CCP-2 Crank Puller uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Please Note: CCP-4 will not work on crank arms that fit square, tapered bottom bracket spindles. Also note that crankarms with a one-key release" system ("self extracting") do not require any crank puller tool. The one-key system acts as the remover. If the one-key system is removed, the CCP-4 can be used to pull the arm. Park Tool CCP-2 Crank Puller Features Floating tip seats against bottom bracket axle for smoother operation and longer life Fine thread for low force operation Vinyl

This Park Tool Crank Puller provides Park quality to those with Shimano Octalink or ISIS Splined cranks. It has a floating tip which seats against the bottom bracket axle for smoother operation and longer life and a fine thread for a low force operation. The handle is coated with vinyl for durability and comfort in use. Park Tool Crank Puller for Splined Cranks Features It uses a long, comfortable handle and a fine thread for the leverage needed to remove tight crank arms Unique rotating tip design has been updated over the CCP-4 and ensures even smoother operation and longer life Note: The CCP-44 will not work on crank arms that fit standard square, tapered bottom bracket spindles