Accessories Park Tool

The Bbt-18 Is A Heavy Duty, Investment Cast Tool For Installing And Removing The Following:- Shimano® Octalink® Right Side Bottom Bracket Cup With External Notches- Bontrager® Isis Drive™ Bottom Bracket Cups- Front Chainring Lockring For Bosch® Gen 3 And Gen 4 E-Bike Systems And Specialized® Levo® Brose® E-Bike SystemsBbt-18 Features:- The Bbt-18 Has 8 Notches With An Outside Diameter Of Nominally 43.4mm. The Inside-To-Inside Width Is Approximately 38mm. Each Notch Is Approximately 3.9mm Wide. The Hole In The Center Of The Casting Is 22.5mm, And Will Not Fit Over The 30mm Spindles. Can Be Used With A 36mm Crow Foot (Such As The Twb-36) Or Open-Ended Wrench.

The BBT-19.2 is used to remove and install external bearing crankset bottom brackets. Fits external bearing bottom brackets with 16 external notches and an outside diameter of approximately 44mm.Features:- 16-notch 44mm OD cupsFits:- Shimano® BB80, BB5700, XT® BB70, BB51, and previous external bearing threaded cups- External threaded types for Campagnolo®, Chris King®, FSA® MegaExo®, SRAM®/Truvativ® GXP®, Race Face® X-type, Surly®, Wheels®, Fulcrum®, Hope™ (non-BSA30) and others- 16-notch Bafang® BBSH, BBS02 Mid Drive motor lockrings

##Park Tool HCW5 Double-Sided Bottom Bracket Lock Ring Hook Spanner A simple yet highly effective tool to tighten or loosen your bottom bracket's lock ring, the Park Tool HCW5 Double-Sided Bottom Bracket Lock Ring Hook Spanner is a double ended tool that uses a Y-head design for optimum leverage and strength. The three pin setup ensures maximum engagement while the Park Tool limited lifetime guarantee gives you piece of mind.

Our popular and versatile Head Wrenches feature our proven Y head design and all headset wrench openings are laser cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled laser technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but it's worth the extra effort.Features:- 32mm and 36mm head wrench

Park Tool´s polyurea lubricant was developed specifically for bicycle maintenance and repair. PolyLube 1000™ has an extremely high shear strength to protect vital parts under extreme conditions. PolyLube 1000™ also repels moisture and is compatible with conventional greases.Features:- 16 oz. tub- Will not harm carbon fiber

This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special V-shaped handle, and super strong replaceable pin make chain removal and installation a breeze.Features:- Compatible with 3/32´´ 5 to 12-speed derailleur chains and Campagnolo 13-speed derailleur chain- Shelf for loosening tight linksSpecification:- Perfect take-along chain tool at only 2.7 oz. (77g)- Dimensions: 60mm x 55mm x 15mm

Shop quality hex wrenches with a ball end on the long arm (exc. 10mm) for hard to reach bolts and a straight end on the short arm for high torque applications.Features:- Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes- Wrench tips are precision chamfered for a clean, tight fit- Made from through-hardened industrial quality steel

Bike Tool Kit / Chrome Vanadium Steel

Bike Tool Kit / Chrome Vanadium Steel

Professional Quality 7´´ Diagonal/Side Cutting Pliers With Soft Touch Dual Density Grips. Made From Forged, Heat-Treated, Cro-Moly Steel.

Take the mess out of tubeless tire setup and removal. The TSI-1 enables you to inject the perfect amount of sealant directly into mounted tubeless tires through the valve stem without removing the bead from the rim. The long, thin tube is able to fit all the way through many Presta stems with removable valve cores, for tidy injection and removal of all injectable tubeless bicycle tire sealants. The oversized syringe body features an easy-to-read gauge with fluid ounce and cc markings for precise application of sealant.Features: - Alienation® Blue Magic- Black Ox®- Bontrager® TLR- Continental® RevoSealant- Maxima Racing Oils®- Muc-Off® No Puncture Hassle- Orange Seal® Endurance- Orange Seal® R…

Once You Try On This Apron, There´s No Going Back To Standard Aprons. A Park Tool Logo Makes The Apron As Good Looking As It Is Functional (Even When It´s Dirty).Sa-3 Features:- 3 Lower Pockets, Each 7.25´´ Wide And 7.5´´ Deep (18.5 Cm X 19 Cm)- 4 Upper Pockets, Each 4.25´´ (11cm) Deep- Upper Pockets May Be Unbuttoned To Swing When The User Bends Over To Keep Items In Pockets- A Full 35´´ In Length, The Bottom 7´´ Of The Apron Can Be Snapped Up For A Custom Height Fit

Park Tool TWS-1 L-Shaped Torx Compatible Wrench Set The Park Tool TWS-1 L-Shaped Torx Compatible Wrench Set is made from high grade, high-torque industrial steel and comes with sizes T9 to T40, making it perfect for your home workshop. There's a reason Park Tool is used within the majority of bike workshops in the pro peloton.

Capable of fitting 16-notch threaded bottom brackets with a major diameter (outside of notches) of 39-40mm and a minor diameter (inside of notches) of 37.6mm, including: -Shimano® XTR® BB93Specifications:- For 3/8 head wrenches- Shimano®- Dura -Ace® BB9000- Token®Also fits chainring locks for Shimano® STEPS square drive motors, models:- E6000- E6002- E6050

The TL-5 Heavy Duty Tire Lever Set is designed for use on the toughest tire and rim combinations. Made of forged steel, these beefy levers are a full 8´´ (20.3 cm) long for superior leverage. Specially designed tip engages tire bead so it can be removed with just two levers. Ideal for difficult to remove downhill and freestyle tires. Set of two.

A Great Way To Hold Small Parts, Tools And Components During A Repair, The Om-1 Features Multiple Small Pockets And One Large Work Area. Perfect For Suspension Work Or To Organize Parts For Installation.Features:- Made Of A Rubber-Like Pvc- Cleans Easily And Looks Great On Any BenchSpecifications:- Measures: 14.7´´ X 7´´ (38cm X 18cm)

Capable of fitting 16-notch threaded bottom brackets with a major diameter (outside of notches) of 44-45mm and a minor diameter (inside of notches) of 42.7mm, including: - Shimano® BB80, BB5700, XT®BB70 , BB51 and previous external bearing threaded cups:- Threaded cups from Campagnolo®, Chris King®, FSA® MegaExo®, Hope™, SRAM®/Truvativ® GXP®, Race Face® X-type, Surly®, Wheels®, Fulcrum ® et al- Center Lock Lock Rings- Bafang BBSH, BBS02 Mid Drive Motor Lock Rings

To Alleviate Poor Shifting And Uneven Drive Train Wear, Manufacturers Recommend Chain Replacement Before Rear Cog Replacement. Now You Can Quickly And Accurately Determine The Wear And Stretch Of Any Chain With The Park Tool Chain Checker. Simply Insert The Chain Checker'S Pins Into Two Links, Lightly Press The Swing Arm Gauge, And Then Check The Gauge Window For An Accurate Reading The Cc-2 Is Compatible With Most Single-Speed And Derailleur Chains. For 9 And 10-Speed Chains, Replace Chain At Or Just Before The 0.75% Reading. For 11 And 12-Speed Chain, Replace At Or Just Before The 0.5% Reading. For Single-Speed Chains, Replace Chain At Or Just Before The 1% Reading. Check With Manufacturer …

##Park Tool PW3 Pedal Spanner A versatile pedal wrench for regular shop use. 15 mm and 9/16 inch open ends. The extra long tubular section handle will resist flexing, and it is vinyl dipped for comfort and a secure grip. Made from Cr-Mo steel. Reinforced at the spanner openings for a stronger longer life.

Bike Tool Kit / Chrome Vanadium Steel

Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver.Features:- Works on 5- to 12-speed road and mountain bike cassettes and freewheels- 1´´ (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools- Features hardened pins to keep the chain in place

The RT-1 Headset and Bottom Bracket Cup Remover makes headset and bottom bracket cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup.Specifications:- Fits 1´´, 1-1/8´´ and 1-1/4´´ headsets- Also removes SRAM® DUB® non-threaded pressed in bottom brackets as well as other PressFit 30 (PF30) systems- Strong, heat treated alloy steel with nickel finish- Nominal OD of shaft is 1´´ (25.4mm)- For use on 27–38mm (1´´ to 1-1/2´´) bearing races

The PW-4 Professional Pedal Wrench is designed for heavy shop use. An oversized, asymmetrical head is made from Cro-Moly steel for superior strength and durability. While strong, the PW-4 is thin enough to access all wrench flats.Features:- Two 15mm wrench openings at 30 degree and 45 degree angles for best mechanical advantage, regardless of pedal position- Round vinyl dipped handle won't dig into the hand like flat wrenches- Extra long 14´´ handle provides the leverage to remove even the tightest pedals

A great place to keep small parts, cable end caps, grease, and whatever else you can think of. Stainless steel construction with a clear acrylic hinged top and four removable bins. Parts not included. 12´´ x 5.5´´ x 3.5´´ (30.5cm x 14cm x 9cm).