Bike Accessories Park Tool

The Parktool CG-2.4 Chain Gang Cleaning System is the ultimate solution for keeping your bike chain and gears clean and well-maintained. This kit includes everything you need to get your chain and gears sparkling clean, including the CM-5.2 Chain Scrubber, GSC-1 GearClean Brush, and an 8 oz. bottle of CB-2 Citrus ChainBrite.The CM-5.2 Chain Scrubber is designed to make cleaning your bike chain a breeze. It features a series of rotating brushes that work together to scrub away dirt and grime from every angle. The GSC-1 GearClean Brush is perfect for cleaning your bike's gears, cassette, and derailleur. Its tough bristles are designed to get into every nook and cranny, ensuring a thorough clean …

Park Tool Travel and Storage Bag for PCS Range Park Tool’s Travel and Storage Bag for PCS Range is the easy way to carry any of their compatible workstands, protecting both the stand and anything else being transported. Also ideal for storing the workstand when not in use.

Park Tool 106 Repair Stand Work Tray A great work stand accessory built to keep tools, lubes and spare parts right at your fingertips. The 106 installs easily utilising the exclusive Park Tool receiver pod accessory system found on the PRS-15, PCS-10 and PCS-11, as well as PCS-1, PCS-4 and PCS-9 when used with part 106-AC Accessory Collar (available separately). Perfect for the races, ride support or as a convenient way to keep tools and supplies handy. Easy to install or disassemble.

The RT-2 makes headset bearing cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. The tool end is struck with a mallet and the flared ends evenly distribute force around the cup as the cup is driven out. Strong heat-treated alloy steel construction with nickel finish for a long service life.Features:- Removes bearing cups from head tubes using 1¼´´ and 1½´´ headset standards- SHIS terminology: Removes ZS44, ZS49, ZS55, ZS56, EC49 and EC56 headset cups- Also removes bottom bracket cups on one-piece crank systems- For use on bearing cups with an ID of 38 to 55 mm (1.5´´ to 2.1´´)- Nominal OD of shaft is 25.4 mm (1´´)

The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. Useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps.Features:- Straps install onto any round tube from 12mm to 60mm (0.5´´ to 2.4´´), as well as most irregular and aero-shaped tubing found on bicycles- Rotating arti…

A Great Shop Accessory Made To Hold A Wide Variety Of Axles, Spindles And Any Park Tool Freewheel Remover/Lockring Tool. Made From Precision Extruded Aluminum.Av-5 Features:- Top Retainer Legs And Magnets Hold The Inserts Securely In Place During Bench Vise Use- 5, 9, 10, 12, 14, 20, 25, 30, And 36mm Jaw Openings- Includes Jaw Opening For Safely Holding Hydraulic Tubing- Mini V-Block- 1´´ Hex, Compatible With Park Tool Freewheel Removers (Fr-1, Fr-2, Etc.)- 5 In. (127mm) Wide

Head Cup Remover / Use Bearing cups dismantling / Steel

The BBT-30.4 Bottom Bracket Bearing Tool Set is designed and built to install and remove of the bearings used in bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright™ and PF121 bottom bracket systems. The BBT-30.4 features a bushing set used in conjunction with a head cup press (such as HHP-2 or HHP-3) to quickly and precisely press the BB30 and PF30 bearings into the bottom bracket shell. The included BB30 bearing remover works from inside the shell to easily push out bearings. Features:- Updated version of the BBT-30.3 with extra length to work with wider fat bike bottom bracket shells.

The SG-6 Threadless Saw Guide ensures a straight, clean cut on 1´´ (25.4mm), 1-1/8´´ (28.6mm) and 1-1/4´´ (31.75) threadless fork steerer tubes. Also works great when cutting handlebars or other round tubes from 22mm to 33mm. Simply clamp the SG-6 onto the tube and cut, letting the SG-6 guide the hacksaw blade. The SG-6's non scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use.

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. Available in two versions, the Tool Kaddie rotates for easy access and is molded from a durable composite material. Features:- Stand Mount mounts to any Park Tool Professional Shop Stand (all versions of PRS-2, -3, and -4)- Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters- Generic slots and holders to hold a wide variety of tools and small parts- Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately)- …

The #105 is a handy and sturdy cast aluminum work tray with deep-walled compartments and assorted tool slots for holding tools, lubes and small parts.Features:- Fits upright tubes on PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-13 Repair Stands. Also fits 1996 and newer PRS-6, PCS-1, PCS-4, PCS-4-1, PCS-4-2 Repair Stands.- The 105 tray will fit tubing from 1-7/16´´ to 1-3/4´´ (36mm to 45mm).- Tools not included

Engineered for fit, function, and leverage, these L-shaped shop quality Torx® compatible wrenches are a must have for every workshop.Features:- High-torque, industrial steel wrenches- Torx® compatible drivers at each end- Includes T6, T8, T10, T15, T20, T25, T30, and T40- Comfortable, ergonomically designed nylon handles fit perfectly in your hand- Durable wall/pegboard mount tool holder allows easy access and organization- Available 3-Way storage (tools not included)

The Crs-1 Offers Six Inserts With Which To Install The Fork Crown Race. The Bearing Surface Is Spared A Direct Hit By Using Different Inserts To Ensure Proper Fit On The Race. Choose The Correct Insert Then Slide The Tube Over The Fork Tube And Into The Top End Of The Insert. Using A Hammer, Tap Firmly On The End Cap Of The Tube And Seat The Race Into Its Proper Place Safely And Accurately. The Crs-1 Set Includes One Universal Setting Tube, Three 1´´ Inserts, And Three 1-1/8´´ Inserts. The Crs-1 Will Work On Forks Of 340mm Column Length Or Less.Crs-1 Features:- For Oversized Column In 1-1/4´´ Or 1-1/2´´ Use The Crs-15.2 Crown Race Setter.- Shis Terminology: The Crs-1 Services In Shis Sizes 26…

The CRS-15.2 uses two different insert rings to install bearing races on the 1.5´´ and 1-1/4´´ forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm.Features: - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.

Spoke Tension Meter Unior 1752/2Features:- Works At All Types Of Spokes- Analog Instrument Is Calibrated And Ready To Use- Press The Handle, Put The Spoke Betweeen Both Pins And Release The Handle- Clearly Tool Scale Allows An Easy Reading- Incl. Value Table- Put The Spoke Into One Of The Upper Openings At The Tool And Read The ValueSpecifications:- Thickness: 205- Width: 130 - Additionsl lenght: 34- weight: 637

Designed and built specifically for a wide variety of bicycle Torx® compatible work, the THT-1 is a set of eight common sizes of professional quality T-Handle star-shaped wrenches made for speed, efficiency, leverage and a perfect fit. Soon to become your favorite Torx® compatible set, the THT-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included).Features:- Carefully selected combination of Chrome Vanadium and S-2 tool steels- T6, T8, T10, T15, T20, T25, T30 and T40 Torx® compatible wrenches included- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless- Sliding T-handle cre…

The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic — a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18´´ (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.The stand´s all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bik…

Repair Stand Clamp / Steel

Park Tool HHP2 Bearing Cup Press Effortlessly align and press headset bearing cups into frames with precision using this tool. It completely eradicates the risk of damaging or misaligning bearing cups.

The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork. The tool is fully adjustable, allowing precise, independent positioning of the blades around the crown race. Locating each blade independently provides flexibility to fit around most potential interferences with fork top caps or crown protrusions.Features:- Universal design works with 1´´, 1-1/8´´, 1-1/4´´ and 1.5 forks (suspension or rigid) and crown races with outside diameters up to 64mm- Accepts steering columns from 14 to 43cm (5.5 to 17 inches) in length- All-steel construction for long life- Blades are necessarily thin and will wear with use. Crown races with a tigh…

The 130 Repair Stand Base is designed for the PRS-3, PRS-3 OS, PRS-3.2, and PRS-23 Repair Stands.Specifications:- 22-1/2´´ x 22-1/2´´ x 7/16´´ (57cm x 57cm x 1.1cm) steel plate- Approximately 68 lbs. (31kg)

Park Tool PCS-4-2 Deluxe Home Mechanic Repair Stand A good workstand is an absolute necessity for anyone who wants to fix or maintain their bike, and Park Tool’s PCS-4-2 Deluxe Home Mechanic Repair Stand is the perfect choice. Made to their legendarily high standards, the stand is made from powder-coated steel for resistance to corrosion and has a wide, stable platform with rubber feet that can be adjusted to accommodate uneven floors.  It uses the 100-5D Professional Micro-Adjust Clamp that has 360° of rotation so that the bike can be perfectly positioned for any job and the head will grip tubes up to 76mm in diameter so it will fit almost any frame. The stand's height can also be adjus…

We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment.

Park Tool VP1 Vulcanizing Patch Repair Kit The Park Tool VP-1 Vulcanising Patch Repair Kit includes six thin and flexible patches with tapered edges to blend with the tube’s profile. Four round patches are 25mm in diameter for smaller holes. Two oval patches, 25mm x 35mm, are for wider cuts. A tube of self-vulcanizing fluid bonds the patch to the tube at the molecular level. Each kit is packaged in a small plastic box with sandpaper for cleaning the tube and instructions.