Bike Accessories Park Tool

The MT-20 is a high quality folding take-along tool that features forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.Features:- 3, 4, 5 and 8mm hex wrenches- T25 Torx® compatible driver- Combo cross/straight tip screwdriver- CO2 cartridge inflator adaptor- Key ring holderSpecifications:- Weight: 95g (3.35 ounces)

The BBT-19.2 is used to remove and install external bearing crankset bottom brackets. Fits external bearing bottom brackets with 16 external notches and an outside diameter of approximately 44mm.Features:- 16-notch 44mm OD cupsFits:- Shimano® BB80, BB5700, XT® BB70, BB51, and previous external bearing threaded cups- External threaded types for Campagnolo®, Chris King®, FSA® MegaExo®, SRAM®/Truvativ® GXP®, Race Face® X-type, Surly®, Wheels®, Fulcrum®, Hope™ (non-BSA30) and others- 16-notch Bafang® BBSH, BBS02 Mid Drive motor lockrings

The Bbt-18 Is A Heavy Duty, Investment Cast Tool For Installing And Removing The Following:- Shimano® Octalink® Right Side Bottom Bracket Cup With External Notches- Bontrager® Isis Drive™ Bottom Bracket Cups- Front Chainring Lockring For Bosch® Gen 3 And Gen 4 E-Bike Systems And Specialized® Levo® Brose® E-Bike SystemsBbt-18 Features:- The Bbt-18 Has 8 Notches With An Outside Diameter Of Nominally 43.4mm. The Inside-To-Inside Width Is Approximately 38mm. Each Notch Is Approximately 3.9mm Wide. The Hole In The Center Of The Casting Is 22.5mm, And Will Not Fit Over The 30mm Spindles. Can Be Used With A 36mm Crow Foot (Such As The Twb-36) Or Open-Ended Wrench.

The Threadless Nut Setter is used to install star-fangled nuts found on threadless headset systems. Thread the nut onto the TNS-1, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.- The TNS-1 is for 1´´ and 1-1/8´´ headset systems- Fits star-fangled nuts with an M6 threaded nut. Not compatible with M10 threaded star-fangled nuts.

Park Tool´s polyurea lubricant was developed specifically for bicycle maintenance and repair. PolyLube 1000™ has an extremely high shear strength to protect vital parts under extreme conditions. PolyLube 1000™ also repels moisture and is compatible with conventional greases.Features:- 16 oz. tub- Will not harm carbon fiber

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit.Features:- Carefully selected combination of Chrome Vanadium and S-2 tool steels- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless- Machined, chamfered tips allow easier insertion into hex fittings- Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy- Sliding T-handle creates increased leverage and multiple access positions

This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special V-shaped handle, and super strong replaceable pin make chain removal and installation a breeze.Features:- Compatible with 3/32´´ 5 to 12-speed derailleur chains and Campagnolo 13-speed derailleur chain- Shelf for loosening tight linksSpecification:- Perfect take-along chain tool at only 2.7 oz. (77g)- Dimensions: 60mm x 55mm x 15mm

The Tws-2 Includes The Star-Shaped Torx® Compatible Wrench Sizes Currently Used On Bicycle Components In A Convenient Fold-Up Set.Tws-2 Features:- Includes T7, T9, T10, T15, T20, T25, T27, T30 And T40 Wrenches- Wrenches Made From Industrial Tool Steel, Through Hardened And Tempered For Long Life- Multi-Position Composite Handle Is Lightweight, Slip-Resistant, And 40% Stronger Than Steel Handles- Torx® Is A Registered Trademark Of Acument Intellectual Property, Llc

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit.Features:- Carefully selected combination of Chrome Vanadium and S-2 tool steels- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless- Machined, chamfered tips allow easier insertion into hex fittings- Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy- Sliding T-handle creates increased leverage and multiple access positions

Use As A Self Contained Grease Gun By Using The Included 3.6 Fl. Oz (100ml) Canister Or Screw The Pump On To Any Tube Of Park Tool Grease Or Anti-Seize. Small Tip Opening Ensures Precise Placement Of Lube In Any Application.

Once You Try On This Apron, There´s No Going Back To Standard Aprons. A Park Tool Logo Makes The Apron As Good Looking As It Is Functional (Even When It´s Dirty).Sa-3 Features:- 3 Lower Pockets, Each 7.25´´ Wide And 7.5´´ Deep (18.5 Cm X 19 Cm)- 4 Upper Pockets, Each 4.25´´ (11cm) Deep- Upper Pockets May Be Unbuttoned To Swing When The User Bends Over To Keep Items In Pockets- A Full 35´´ In Length, The Bottom 7´´ Of The Apron Can Be Snapped Up For A Custom Height Fit

Capable of fitting 16-notch threaded bottom brackets with a major diameter (outside of notches) of 39-40mm and a minor diameter (inside of notches) of 37.6mm, including: -Shimano® XTR® BB93Specifications:- For 3/8 head wrenches- Shimano®- Dura -Ace® BB9000- Token®Also fits chainring locks for Shimano® STEPS square drive motors, models:- E6000- E6002- E6050

A Complete Take-Along Tool Combining Our Award Winning I-Beam Technology With A Full Array Of Emergency Tools.Ib-3 Features:- 1.5, 2, 2.5, 3, 4, 5, 6, And 8mm Hex Wrenches- T25 Torx® Compatible Driver- Flat Blade Screwdriver- 5- To 12-Speed Compatible Chain Tool*- Composite Wrapped Tire Lever- 8mm Box Wrench- Two Spoke Wrenches: 3.23mm (Sw-0) And 3.45mm (Sw-2)Specifications:- Dimensions: 90mm X 40mm X 25mm (3.5´´ X 1.6´´ X 1´´)- Weight: 170g (6 Ounces)

This Spanner Uses Hardened, Replaceable Pins Nominally 2.2mm In Diameter. Designed For Heavy Duty Use, The Distance Between The Pins Is Adjustable, Allowing Use On Virtually All Hanger Cups Using Pin Holes.

Capable of fitting 16-notch threaded bottom brackets with a major diameter (outside of notches) of 41-42mm and a minor diameter (inside of notches) of 39mm, including: -Shimano Ultegra BBR60 -Shimano Deore XT MT.

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts.Features:- Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models- Reversible body allows use on center and rear drive e-bikes- Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain- Special wicking sponge draws solvent from the chain as it exit…

A Great Way To Hold Small Parts, Tools And Components During A Repair, The Om-1 Features Multiple Small Pockets And One Large Work Area. Perfect For Suspension Work Or To Organize Parts For Installation.Features:- Made Of A Rubber-Like Pvc- Cleans Easily And Looks Great On Any BenchSpecifications:- Measures: 14.7´´ X 7´´ (38cm X 18cm)

All aluminum die cast frame construction, blade tension adjuster and comfortable handle make this the perfect hacksaw for the shop. SAW-1 includes a 12´´ (300mm) steel hacksaw blade in 32 teeth per inch (TPI).

Our versatile and durable 21oz Shop Hammer is a perfectly balanced striking instrument built for a wide variety of shop uses.Features:- Forged steel, precision machined striking face- Non marring, replaceable composite tip- Fiberglass shaft with soft touch grip- 21oz (590g) Head- Length: 13.5´´ (34.5cm)- Steel striking face: 1-3/8´´ (35mm) diameter- Plastic face: 1-11/16´´ (43mm) diameter

Professional Quality 6´´ Needle Nose Pliers With Five Different Crimping/Grasping Areas And A Cutting Blade. Forged, Heat-Treated Cro-Moly Steel With An Invisible Spring And Soft Touch Dual Density Grips.

Capable of fitting 16-notch threaded bottom brackets with a major diameter (outside of notches) of 44-45mm and a minor diameter (inside of notches) of 42.7mm, including: - Shimano® BB80, BB5700, XT®BB70 , BB51 and previous external bearing threaded cups:- Threaded cups from Campagnolo®, Chris King®, FSA® MegaExo®, Hope™, SRAM®/Truvativ® GXP®, Race Face® X-type, Surly®, Wheels®, Fulcrum ® et al- Center Lock Lock Rings- Bafang BBSH, BBS02 Mid Drive Motor Lock Rings

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit.Features:- Carefully selected combination of Chrome Vanadium and S-2 tool steels- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless- Machined, chamfered tips allow easier insertion into hex fittings- Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy- Sliding T-handle creates increased leverage and multiple access positions

The TL-5 Heavy Duty Tire Lever Set is designed for use on the toughest tire and rim combinations. Made of forged steel, these beefy levers are a full 8´´ (20.3 cm) long for superior leverage. Specially designed tip engages tire bead so it can be removed with just two levers. Ideal for difficult to remove downhill and freestyle tires. Set of two.

Professional Quality 7´´ Diagonal/Side Cutting Pliers With Soft Touch Dual Density Grips. Made From Forged, Heat-Treated, Cro-Moly Steel.