Bike Accessories Park Tool

To Alleviate Poor Shifting And Uneven Drive Train Wear, Manufacturers Recommend Chain Replacement Before Rear Cog Replacement. Now You Can Quickly And Accurately Determine The Wear And Stretch Of Any Chain With The Park Tool Chain Checker. Simply Insert The Chain Checker'S Pins Into Two Links, Lightly Press The Swing Arm Gauge, And Then Check The Gauge Window For An Accurate Reading The Cc-2 Is Compatible With Most Single-Speed And Derailleur Chains. For 9 And 10-Speed Chains, Replace Chain At Or Just Before The 0.75% Reading. For 11 And 12-Speed Chain, Replace At Or Just Before The 0.5% Reading. For Single-Speed Chains, Replace Chain At Or Just Before The 1% Reading. Check With Manufacturer …

The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75´´ long (27.3cm).

Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized to take the rigors of everyday use.

A set of three unique, multi-purpose picks ideal for a wide variety of detail work.Features:- Aluminum handle with magnet- Picks are replaceable, cold formed, heat treated and polished high carbon steel.- Set includes 1-straight, 1-hook and 1-90 degree pick

Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver.Features:- Works on 5- to 12-speed road and mountain bike cassettes and freewheels- 1´´ (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools- Features hardened pins to keep the chain in place

A great place to keep small parts, cable end caps, grease, and whatever else you can think of. Stainless steel construction with a clear acrylic hinged top and four removable bins. Parts not included. 12´´ x 5.5´´ x 3.5´´ (30.5cm x 14cm x 9cm).

The PW-4 Professional Pedal Wrench is designed for heavy shop use. An oversized, asymmetrical head is made from Cro-Moly steel for superior strength and durability. While strong, the PW-4 is thin enough to access all wrench flats.Features:- Two 15mm wrench openings at 30 degree and 45 degree angles for best mechanical advantage, regardless of pedal position- Round vinyl dipped handle won't dig into the hand like flat wrenches- Extra long 14´´ handle provides the leverage to remove even the tightest pedals

A dirty bicycle drivetrain causes poor shifting and unnecessary wear to expensive parts. The Park Tool Chain and Drivetrain Cleaning Kit contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings.Features:- The Chain and Drivetrain Cleaning Kit- The CG-2.4 works on nearly any bike including multi-speed, single-speed, and e-bikes.

The RT-2 makes headset bearing cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. The tool end is struck with a mallet and the flared ends evenly distribute force around the cup as the cup is driven out. Strong heat-treated alloy steel construction with nickel finish for a long service life.Features:- Removes bearing cups from head tubes using 1¼´´ and 1½´´ headset standards- SHIS terminology: Removes ZS44, ZS49, ZS55, ZS56, EC49 and EC56 headset cups- Also removes bottom bracket cups on one-piece crank systems- For use on bearing cups with an ID of 38 to 55 mm (1.5´´ to 2.1´´)- Nominal OD of shaft is 25.4 mm (1´´)

Big and powerful, the PAW-12 adjustable wrench is forged from carbon steel and chrome plated.Features:- Jaws open to 36mm- Comfortable vinyl dipped handle- Features a laser engraved measurement scale

This shop quality chain whip gives you incredible leverage without worry of slippage, and the head is uniquely shaped to allow quick and accurate access to any cassette.Features:- Works on 7-speed to 12-speed mountain and road bike cassettes as well as single-speed cassettes with a 3/32´´ cog- Hardened bolts hold securely and make chain replacement easy- Heavy duty, heat treated head- Round vinyl coated handle- The SR-2.3 is approximately 15´´ long (38cm)

The BBT-30.4 Bottom Bracket Bearing Tool Set is designed and built to install and remove of the bearings used in bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright™ and PF121 bottom bracket systems. The BBT-30.4 features a bushing set used in conjunction with a head cup press (such as HHP-2 or HHP-3) to quickly and precisely press the BB30 and PF30 bearings into the bottom bracket shell. The included BB30 bearing remover works from inside the shell to easily push out bearings. Features:- Updated version of the BBT-30.3 with extra length to work with wider fat bike bottom bracket shells.

A Great Shop Accessory Made To Hold A Wide Variety Of Axles, Spindles And Any Park Tool Freewheel Remover/Lockring Tool. Made From Precision Extruded Aluminum.Av-5 Features:- Top Retainer Legs And Magnets Hold The Inserts Securely In Place During Bench Vise Use- 5, 9, 10, 12, 14, 20, 25, 30, And 36mm Jaw Openings- Includes Jaw Opening For Safely Holding Hydraulic Tubing- Mini V-Block- 1´´ Hex, Compatible With Park Tool Freewheel Removers (Fr-1, Fr-2, Etc.)- 5 In. (127mm) Wide

Accurately Guides A Hacksaw To Cut Aero-Shaped Seat Masts And Seat Posts Up To 2.75´´ (70mm), As Well As Fork Steerer Tubes And Other Round Tubes From 22mm To 45mm (7/8´´ To 1-3/4´´). The Sg-7.2 Features Two Different Cutting Slots — Standard And Carbon Cutting Blade Widths — In A Hardened Steel Body With Molded Contact Points To Protect Tubes And Frames.

The Bbt-90.3 Press Fit Bottom Bracket Bearing Tool Set Is Designed For Installation And Removal Of Bearings And Bearing Units Used In Bb90, Bb92, Shimano® Press Fit, Sram® Press Fit Gxp®, Race Face® Press Fit And Other Press Fit Bottom Bracket Systems Using 24mm Or 22mm Spindles. The Bbt-90.3 Includes A Bearing Removal Tool And Two Bushings, Which Are Used In Conjunction With A Park Tool Bearing Press To Press The Bearings Into The Bottom Bracket Shell.Features:- Nominal O.D. Of Shaft Is 22mm- Nominal O.D. Of Fingers Is 26mm

The SG-6 Threadless Saw Guide ensures a straight, clean cut on 1´´ (25.4mm), 1-1/8´´ (28.6mm) and 1-1/4´´ (31.75) threadless fork steerer tubes. Also works great when cutting handlebars or other round tubes from 22mm to 33mm. Simply clamp the SG-6 onto the tube and cut, letting the SG-6 guide the hacksaw blade. The SG-6's non scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use.

For A Wheel To Perform Properly, It Is Important For The Rim To Be Centered Between The Locknuts Of The Hub, Or Dished. To Check This, And To Make Precision Adjustments, A Wheel Alignment Gauge (Also Called A Dishing Tool) Is A Must. An Accurate And Truly Versatile Wheel Alignment Gauge That Belongs Alongside Every Truing Stand.Features:- The Wag-4 Allows Easy Checking Of The Dish On Road, Mountain, Or Bmx Wheels From 16´´ To 29´´ (Etrto Or Iso Rim Sizing Of 305-630)- Works With Any Hub Width- Can Be Accurately Used With The Tire Still On The Wheel

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. Available in two versions, the Tool Kaddie rotates for easy access and is molded from a durable composite material. Features:- Stand Mount mounts to any Park Tool Professional Shop Stand (all versions of PRS-2, -3, and -4)- Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters- Generic slots and holders to hold a wide variety of tools and small parts- Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately)- …

The #105 is a handy and sturdy cast aluminum work tray with deep-walled compartments and assorted tool slots for holding tools, lubes and small parts.Features:- Fits upright tubes on PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-13 Repair Stands. Also fits 1996 and newer PRS-6, PCS-1, PCS-4, PCS-4-1, PCS-4-2 Repair Stands.- The 105 tray will fit tubing from 1-7/16´´ to 1-3/4´´ (36mm to 45mm).- Tools not included

The TS-TA makes it possible to adapt most Park Tool Truing Stands to work with 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale® Lefty™ wheels.

Engineered for fit, function, and leverage, these L-shaped shop quality Torx® compatible wrenches are a must have for every workshop.Features:- High-torque, industrial steel wrenches- Torx® compatible drivers at each end- Includes T6, T8, T10, T15, T20, T25, T30, and T40- Comfortable, ergonomically designed nylon handles fit perfectly in your hand- Durable wall/pegboard mount tool holder allows easy access and organization- Available 3-Way storage (tools not included)

A Versatile Digital Scale Built To Accurately Weigh Bikes, Frames, And Components. Uniquely Designed To Be Clamped Solidly Into A Repair Stand Or Hung From A Hook Or Branch.Specifications:- Measures And Displays Kilograms To .02 Kg (.02 Kg = 20 Grams)- Measures Pounds To 1 Oz (1 Oz = 28.35 Grams)- Includes A Dual Position, Silicone Coated Hanging Hook- Weight Limit Of The Ds-1 Is 25 Kilograms (55 Pounds)- Requires 3 Aaa Batteries That Are Not Included- The Scale Measures To +/- 20 G In The Kg Mode, In The Pounds Mode The Resolution Is +/- 1 Oz. (1 Oz. = 28.35g)

The Crs-1 Offers Six Inserts With Which To Install The Fork Crown Race. The Bearing Surface Is Spared A Direct Hit By Using Different Inserts To Ensure Proper Fit On The Race. Choose The Correct Insert Then Slide The Tube Over The Fork Tube And Into The Top End Of The Insert. Using A Hammer, Tap Firmly On The End Cap Of The Tube And Seat The Race Into Its Proper Place Safely And Accurately. The Crs-1 Set Includes One Universal Setting Tube, Three 1´´ Inserts, And Three 1-1/8´´ Inserts. The Crs-1 Will Work On Forks Of 340mm Column Length Or Less.Crs-1 Features:- For Oversized Column In 1-1/4´´ Or 1-1/2´´ Use The Crs-15.2 Crown Race Setter.- Shis Terminology: The Crs-1 Services In Shis Sizes 26…

A Complete Tool Set To Work On Both Campagnolo® And Fulcrum® Ultra-Torque™ And Power Torque™ Crank And Bottom Bracket Systems. The Cbp-8 Includes A Beefed Up Bearing And Crank Puller And All The Fittings Necessary To Remove And Install Both Systems.Cbp-8 Features:Set Includes:- Bearing Puller That Fits Both Power Torque™ And Ultra-Torque™- Crank Puller For Power Torque™- Bearing Setter For Both Power Torque™ And Ultra-Torque™- Removal Adaptor For Power Torque™ Crank Bearings- Removal Protection Pads For Use With Carbon Cranks- Removal Protection Adaptor For Use With Aluminum Crank Arms- Crank Removal Extension Plug For Power Torque™