Car Subwoofers

Ground Zero Gzta bass emote bass level controls Gzia/Gzta/Gzha/Gzna ground Zero power amplifiers

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Cta-2031 specifications: 300w rms, 900w peak Alpine s-w8d2 s-series subwoofers Frequency response: 34hz-200hz Mounting depth: 3 3/4-inch

10"/250mm Subwoofer Grille for Kenwood KFC-W2516PS 1 Grille Only. Subwoofer on the photo is not included.

Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass. Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily …

Gehäusesubwoofer

10" 4-ohm subwoofer | Polypropylene and mica cone with poly-foam surround | Stamped steel frame Power handling: 50-250 watts RMS | Peak power: 750 watts Sensitivity: 86.6 dB | Frequency response: 24-200 Hz Top-mount depth: 5-1/16" | Sealed box volume: 0.83 cu. ft. | Ported box volume: 1.51 cu. ft.

Boss Audio Systems BX-10 Subwoofer Ripper Series 350 RMS, 700 Watt max. Factory packaging

Car Subwoofer Speaker / Diameter 178 mm / 7 Inch / 90 watt / Nominal Load 60 Watt / 88 dB / Impedance 2 x 4 Ohm

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

Plus One Woofer Cones Perimeter Illumination SSI (Switch-Selectable Impedance) One-piece Polymer basket High Sensitivity

Car Subwoofer Speaker / Diameter 300 mm / Mounting Depth 115 mm / 300 watt / Nominal Load 200 Watt / 94 dB / Impedance 8 Ohm

Power - 3400 Watts Max x 1 @1-Ohm, 1700 Watts Max x 1 @2-Ohms, 850 Watts Max x 1 @4-Ohms 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(…

Flat Subwoofer / Nominal Load 130 Watt

Boxed Subwoofer / Nominal Load 300 Watt / Impedance 4 Ohm

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Sensitivity SPL (1W / 1m) 86 dB, Resonant Frequency 44 Hz Poly Injection Cone, 2 Inch Copper Voice Coil, Rubber Surround Sealed Enclosure Internal Volume: .75 Cubic Feet 3.9 Inch Mounting Height, 11 Inch Mounting Hole Diameter Dimensions: Depth 13” x Width 13” x Height 4.5”

Car Subwoofer Speaker / Diameter 300 mm / 12 Inch / 300 watt / Nominal Load 150 Watt / Impedance 1 x 4 Ohm

Features: Alpine W12S4 12" 750 Watt Peak 250 Watt RMS 4-Ohm Car Audio Subwoofer 12" 4-ohm subwoofer. Polypropylene and mica cone with poly-foam surround. Stamped steel frame

20cm (8) Active Underseat Subwoofer. Power: 150/300 Watts RMS/MAX Class-D. low pass 50-120 Hz. bass boost 0-12db @ 45 Hz. high/low level input. auto-on (audio/DC offset). phase shift 0-180°. includes PLC bass remote control. dimensions: 36.5 x 23.8 x 8.5 cm

Diameter 250 mm / 10 Inch / 360 watt / Nominal Load 150 Watt / Impedance 4 Ohm