Power Tool Batteries & Chargers Sealey

Package includes: Model No. - Description SBA22AP - Anodised Aluminium Pipe Ø22mm x 3m (x12) SBA22EE - Equal Elbow Ø22mm (x4) SBA22ET - Equal Tee Ø22mm (x4) SBA22BSA - Straight Adaptor Ø22mm x 3/4"BSPT Brass (x6) CAS34WB - Wall Box 3/4" (x5) SBA22PC - Pipe Clip Ø22mm Pack of 10 (x3) SBA22DC - Disconnect Clip & Depth Gauge 22mm Features & Benefits: • Package includes: • Model No. - Description • SBA22AP - Anodised Aluminium Pipe Ø22mm x 3m (x12) • SBA22EE - Equal Elbow Ø22mm (x4) • SBA22ET - Equal Tee Ø22mm (x4) • SBA22BSA - Straight Adaptor Ø22mm x 3/4"BSPT Brass (x6) • CAS34WB - Wall Box 3/4" (x5) • SBA22PC - Pipe Clip Ø22mm Pack of 10 (x3) • SBA22DC - Disconnect Clip & Depth Gauge 22mm • M…

Fully automatic microprocessor controlled unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Up to 100Amp power supply maintains stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work. Voltage settings between 13-14.8V for programming. 5m Heavy-duty cable, clamps and Anderson plug. Recovery/Desulphation mode will recover a discharged battery (>2V) to almost 100% of its original capacity. 70A continuous output current or up to 100A maximum for up to three minutes as required. Patent-Pending thermal runaway protection and algorithms allow fast and safe charging. Designed for use with regular …

Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suitable for AGM/GEL, Lead Acid, and Lead Calcium as well as stop/start batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases and suitable for 12V & 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during charging and starting, preventing damage to vital …

Professional starter/charger fitted with a heavy-duty transformer, flush mounted digital ammeter and variable charge rate controls. Features a fast-charge timer device to enable rapid battery recovery with a reduced risk of boiling the battery. Quick-charge facility allows the maximum charge output to be utilised for up to one hour, after which it is automatically cut-off.

Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suitable for AGM/GEL, Lead Acid, and Lead Calcium as well as stop/start batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases and suitable for 12V & 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during charging and starting, preventing damage to vital …

Professional starter/charger fitted with a heavy-duty transformer, flush mounted digital ammeter and variable charge rate controls. Features a fast-charge timer device to enable rapid battery recovery with a reduced risk of boiling the battery. Quick-charge facility allows the maximum charge output to be utilised for up to one hour, after which it is automatically cut-off.

Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suitable for AGM/GEL, Lead Acid, and Lead Calcium as well as stop/start batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases and suitable for 12V & 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during charging and starting, preventing damage to vital …

Professional starter/charger fitted with a heavy-duty transformer, flush mounted digital ammeter and variable charge rate controls.

Professional starter/charger fitted with a heavy-duty transformer, flush mounted digital ammeter and variable charge rate controls.

Professional starter/charger fitted with a heavy-duty transformer, flush mounted digital ammeter and variable charge rate controls.

The Sealey START660 Starter/charger fitted with large wheels for easy mobility The Sealey START660 is a Heavy-duty starter/charger for professional garages, workshops and bodyshops. The START660 features a fast-charge timer device to enable rapid battery recovery with a reduced risk of boiling the battery. Fitted with large wheels for easy mobility and features an analogue ammeter and switchable charge circuitry for accurate charge control. Features:  
- Caters for all requirements from cars right up to light commercial vehicles 
- Heavy-duty starter/charger for professional garages, workshops and bodyshops 
- Features fast-charge timer device to enable rapid battery recovery with redu…

Sealey START560 Starter / Charger for professional garages, workshops and bodyshops The Sealey START560 is a Starter / Charger that caters for all requirements from cars right up to commercial vehicles. Features fast-charge timer device to enable rapid battery recovery with reduced risk of boiling the battery. Fitted with large wheels for easy mobility and features an analogue ammeter and switchable charge circuitry for accurate charge control. Features:
- Caters for all requirements from cars right up to commercial vehicles
- Heavy-duty starter/charger for professional garages, workshops and bodyshops
- Features fast-charge timer device to enable rapid battery recovery with reduced risk …

The Sealey START420 Starter/charger for professional garages, workshops and body shops The Sealey START420 is a heavy-duty charger and starter designed for use in professional garages and workshops. It can be used for anything from cars to commercial vehicles. Thanks to its large wheels, it can be easily manoeuvred around the site.  Features:
- 3 Phase
- Caters for all requirements from cars right up to light commercial vehicles
- Heavy-duty starter/charger for professional garages, workshops and body shops
- Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control Specification:
- Supply: 240V
- Output: 12/24V <&hellip;

The Sealey START320 Starter/Charger for professional garages, workshops and body shops  The Sealey START320 is a 12/24v Starter/Charger for professional garages, workshops and body shops. With large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control. Features:  
- Caters for all requirements from cars right up to light commercial vehicles 
- Heavy-duty starter/charger for professional garages, workshops and bodyshops 
- Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control   Specification: 
- Supply: 240V 
- Output: 12/24V 
- Input Start: 20A 
&hellip;

10L Handheld Vacuum capable of picking up fine dust, plasterboard dust, sawdust, debris, liquids and more. Lightweight, portable and cordless making it very convenient for use in the home, workshop or car, especially where mains power is not accessible. Lightweight tank features quick release clips for ease of emptying. Other features include on board accessory storage; separate battery housing and built-in blow function, which can be used for many applications. Supplied with brush head attachments (x2) , 2m extendable hose, hose storage clips (x4) , HEPA filter, dust and foam filters. Supplied with a mains charger and 4Ah battery (x2) . PART OF THE SV20 SERIES - Offering a one battery fits …

Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suitable for fleet operators running cars and van derivatives. Built-in polarity protection.

Sealey SUPERBOOST180 Starter/charger 180/40amp 12/24v 240v The Sealey SUPERBOOST180 is a battery starter/charger that is suitable for heavier garage use for engines up to a 3-litre capacity. Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features:
- Built-in polarity protection
- Circuitry is protected by a panel mounted fuse
- Suitable for heavier garage use for engines up to 3 litre capacity
- Models feature easy-to-read ammeters and illuminated power switches
- Combination units capable of both charging batteries and providing boost power to help start vehicles with flat batteries Specification: 
- P&hellip;

Automatic battery charger and starter, designed for charging, maintaining, and boosting a variety of AGM (stop/start) , GEL, lead acid and Lithium LiFePO4 batteries up to 300Ah. Intuitive digital display and 150A peak engine start function, makes this unit ideal for every workshop. Features overcharge, short circuit, and reverse polarity protection. Dedicated charging programs for AGM, GEL and conventional lead acid batteries with fully automated charging algorithms. Fast charge program for larger batteries. Automatic boost/engine start function once 12V mode is selected and battery voltage is over 4V. Portable design with carry handle and cable management system which allows the clips to be …

Lithium-ion battery pack compatible with SV20V Series. Features LED battery level indicator. Package includes: Model No. - Description CP20VBP6 - Power Tool Battery 20V 6Ah Lithium-ion for CP20V Series (x2) You may also refer to the individual Model No. for full specification.

Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suitable for fleet operators running cars and van derivatives. Built-in polarity protection.

Fully automatic 7-stage battery charger, designed for charging a variety of EFB (stop/start), GEL, AGM, lead acid and calcium batteries with auto chemistry selection. Automatically selects and charges 6, 12, or 24V batteries depending on battery connected. Zero volt battery charging, enabling recovery and charging of a completely discharged battery (providing any load removed from the rechargeable battery). Old battery sulfation repair function. Reverse polarity, short circuit, over temperature and overcharging protection. Intuitive LED screen displays illuminated charging stages, volts and amps output and battery capacity. Compact design with unique retractable hanging hook, and cable management …

Steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures. A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrectly. Rocker switches control variable output to the battery to maintain peak condition. Suitable for regular and low maintenance batteries.

Fully automatic multistage microprocessor controlled battery charger and maintainer. Sturdy case with protective bumpers and built-in hanging hook. By modifying the charge output through constant monitoring, the life and condition of the battery is optimised. Scrolling digital display with various inbuilt language options. Charge status LED. Multistage charging features thermal runaway, as well as integral ventilation and spark-proofing for maximum safety. Reverse polarity protection in case incorrectly connected to battery.