Other Sound & Hi-Fi

Exchange Roller Kit For Cr190i

12V, 1.5C AC power adapter that is perfect for performing keyboardists and is compatible with Casio CTK-6000, 7000, WK-7500, PX-135, 330, 735 and AP-220 keyboards.
Made in: China
Current: 1001-1500 mA
Power Supply: 240V
Polarity: Center Plus
Voltage: 12V
Current (mA): 1500.0
Number of Outputs: 1
UK/EU Power supply included: No
Plug Type: Barrel
ChargerType: Power Supply

Hear every high frequency within your sound. The Celestion CDX1-1010 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Designed to deliver pristine highs that complement well-defined low frequencies. Guaranteed to project your sound without sacrificing the quality. The CDX1-1010 has a nominal impedance of 8 ohms and is capable of handling 15 watts of continuous power. Installation is quick and simple - the driver just screws into the speaker enclosure. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1010 is the perfect choice.

Hear every high frequency within your sound. The Celestion CDX1-1070 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1070 has a nominal impedance of 8 ohms and is capable of handling 12 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1070 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1430 compression driver has a 1.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1430 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1430 is the perfect choice.

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Power: 100 W
Power (Watt): 100.0
Power RMS: 50 W
Impedance: 8 Ohm
Power RMS (Watt): 50.0
Weight: 0,75 kg
Frequency Range: 800 Hz - 20 kHz
Magnet Type: Neodymium
Diameter (inch): 1.0
Diameter: 1"
Sensitivity: 107 dB
Made in: China
Type: PA

CDX1-1730 features a neodymium magnet, which results in a reliable and high quality HF compression driver with a massive 70% reduction in weight compared to a ferrite device with the same output. Providing 80 W continuous power handling (40 W RMS AES standard) and 110 dB sensitivity. CDX1-1730 features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Magnet Type: Neodymium
Type: PA
Made in: China
Power: 100 W
Impedance: 8 Ohm
Sensitivity: 108 dB
Weight: 0,6 kg
Power RMS (Watt): 50.0
Frequency Range: 2000 Hz - 20 kHz
Power RMS: 50 W
Diameter (inch): 1.0
Diameter: 1"
Power (Watt): 100.0…

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Magnet Type: Ferrite
Diameter: 1"
Frequency Range: 1200 Hz - 20 kHz
Type: PA
Made in: China
Sensitivity: 110 dB
Diameter (inch): 1.0
Power RMS (Watt): 40.0
Power (Watt): 80.0
Power RMS: 40 W
Power: 80 W
Weight: 3,0 kg
Impedance: 16 Ohm…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1745 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1745 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1745 is the perfect choice.

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Type: PA
Sensitivity: 110 dB
Power (Watt): 80.0
Impedance: 8 Ohm
Diameter (inch): 1.0
Frequency Range: 1200 Hz - 20 kHz
Diameter: 1"
Power RMS: 40 W
Made in: China
Power: 80 W
Magnet Type: Neodymium
Power RMS (Watt): 40.0
Weight: 0,75 kg

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3040 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3040 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3040 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Type: Speaker unit
Weight: 5,5 kg
Impedance: 8 Ohm
Power RMS: 300 W
Magnet Type: Ferrite
Power RMS (Watt): 300.0
Frequency Range: 60 Hz - 5 kHz
Made in: China
Power (Watt): 600.0
Diameter (inch): 10.0
Diameter: 10"
Power: 600 W
Sensitivity: 99 dB

Optimized flux distribution in the magnet assembly provides exceptionally low harmonic distortion, for detailed sound reproduction. This 8” cast frame, ferrite magnet loudspeaker is ideal for use as a bass/mid driver in 2-way sound reinforcement cabinets, delivering 400 W continuous power handling (200 W RMS AES standard) and 93 dB sensitivity.
Frequency Range: 70 Hz - 6 kHz
Power RMS: 200 W
Made in: China
Power: 400 W
Sensitivity: 93 dB
Power (Watt): 400.0
Impedance: 8 Ohm
Diameter: 8"
Diameter (inch): 8.0
Power RMS (Watt): 200.0
Magnet Type: Ferrite
Weight: 3,8 kg
Type: Speaker unit

With 700 W continuous power handling (350W RMS AES standard), this robust, cast aluminium replacement driver has been designed for superior sound reinforcement. Purpose-built for mid/bass applications, it really comes into its own when used with compact 12” enclosures. The efficient, Finite Element Analysis-optimised magnet structure delivers high BL (magnetic flux) for a tight, controlled low end performance that delivers truly detailed, high-definition sound reproduction.
Type: Speaker unit
Power (Watt): 700.0
Power: 700 W
Frequency Range: 40 Hz - 4 kHz
Magnet Type: Ferrite
Diameter (inch): 12.0
Diameter: 12"
Weight: 6,3 kg
Power RMS: 350 W
Power RMS (Watt): 350.0
Impedance: 8 Ohm
Made …

6.5'' coaxial loudspeaker providing 150Wrms (AES standard) power handling and 92dB sensitivity. Full range frequency response: 110 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminum chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper clad aluminum voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Made in: China
Power RMS: 75 W
Power RMS (Watt): 75.0
Power (Watt): 150.0
Power: 150 W
Impedance: 8 O…

8'' coaxial loudspeaker providing 200Wrms (AES standard) power handling and 94dB sensitivity. Full range frequency response: 70 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminium chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Power RMS (Watt): 100.0
Power (Watt): 200.0
Diameter: 8"
Impedance: 8 Ohm
Made in: China
Power RMS: 100 W
Power: 200…

Outstanding full-range sound reproduction. The Celestion FTX1225 is a coaxial driver with a nominal impedance of 8 Ohms and a total of 360W RMS power handling. Offering clear and defined audio from 50Hz all the way up to 20kHz the FTX1225 is perfect for a wide variety of system applications. This high-performance driver features a coaxially-mounted 1.75 polyimide compression driver that utilises an FEA-optimised ferrite magnet assembly. This assembly acts as a common motor for the LF and the HF drivers for significantly improved coherence. The FTX1225 also features a demodulation ring that reduces flux modulation resulting in minimised electromagnetic distortion. With eight mounting slots …

The FTX1530 is a 15″ diameter cast frame common motor coaxial speaker, with a single ferrite magnet that acts as a motor for both LF and HF drivers saving space and weight. With a 3″ voice coil, the speaker provides a 800 W continuous / 400 W (AES standard) power rating with a 97 dB LF sensitivity (106.5 dB HF sensitivity). It incorporates a 3″ voice coil compression driver to deliver a 40 Hz to 20 kHz frequency response. An external crossover is required, directing the low and high frequency parts of the input signal to the woofer and HF driver respectively.
Type: Speaker unit
Frequency Range: 40 Hz - 4 kHz
Magnet Type: Ferrite
Diameter (inch): 15.0
Made in: China
Power (Watt): …

Versatile 12 twin-cone design. The Celestion K12H-200TC is a 12 boasts a nominal impedance of 8 Ohms and 200W RMS power handling. With an extended frequency response ranging from 50Hz all the way up to 10kHz the K12H-200TC is perfect for a wide variety of system applications. The K12H-200TC boasts a 1.41kg ferrite magnet and a 2 high-temperature copper voice coil for exceptional reliability and performance. Reliability is further increased with an optimised cone neck/voice coil assembly as well as minimising high-frequency distortion and providing improved overall sound quality. The secondary cone is terminated by a pressure-formed cloth dust cap to enhance the clarity of the mid-band whilst …

Mids as they were meant to be heard. The Celestion TF0510MR is a 5 mid-range driver with a nominal impedance of 8 Ohms and a 30W RMS power rating. With the ability to reproduce mid frequencies with outstanding clarity and detail the TF0510MR is the perfect choice for a three-way multi-driver speaker system. The closed-back design prevents your low-frequency drivers backwave radiation from affecting the TF0510MRs motion eliminating the need for a separate mid-range enclosure in your cabinet. The pressed steel chassis and kevlar-loaded paper cone ensure your driver is well-protected and reliable whilst simultaneously delivering excellent acoustic performance. Easy to install using the four mounting …

6” mid-range driver with nominal impedance of 8 Ohm that provides 95 dB sensitivity and 100W RMS power rating (200 W continuous), ideal for two-way systems. It achieves optimal performance in compact enclosures. It features a 1.5” high temperature copper voice coil wound on polyimide former for increased reliability, vented ferrite magnet assembly for enhanced cooling and rigid pressed steel chassis design for maximum energy transfer. It is also equipped with a single suspension, polyimide former and Kevlar loaded paper cone with cloth sealed surroundings. Frequency range: 85 Hz-6 kHz. Overall diameter: 178 mm. Overall depth: 74 mm. Cut-out diameter: 147 mm. Weight: 1.4 kg.
Power: 200 W
Power RMS …

A closed back makes the steel chassis TF0615MR a dedicated mid-range PA speaker, eliminating the need for a separate mid-range enclosure when dropped into a 3-way cabinet. Optimised to deliver detailed reproduction of mid-range frequencies from 500 Hz to 5000 Hz, this 6” diameter speaker provides 100 W continuous power handling (50 W RMS AES standard) and 97 dB sensitivity. Closed back midrange unit.
Type: Speaker unit
Diameter: 6"
Power (Watt): 100.0
Magnet Type: Ferrite
Weight: 2,0 kg
Power: 100 W
Impedance: 8 Ohm
Power RMS (Watt): 50.0
Power RMS: 50 W
Sensitivity: 97 dB
Frequency Range: 500 Hz - 5 kHz
Diameter (inch): 6.0
Made in: China…

18" pressed steel chassis, ferrite magnet subwoofer.Balanced Airflow Venting provides enhanced coolingMulti-layer voice coilCompact high flux Dual Magnet Motor design
Type: Speaker unit
Frequency Range: 35 Hz - 1 kHz
Power: 1000 W
Sensitivity: 96 dB
Power RMS: 500 W
Magnet Type: Ferrite
Power RMS (Watt): 500.0
Made in: China
Diameter: 18"
Power (Watt): 1000.0
Diameter (inch): 18.0
Impedance: 4 Ohm
Weight: 9,0 kg

Elegant 4-drawer module characterized by an asymmetrical facade.Generously-sized drawers accept documents up to 24 x 32 cm elastic sleeves.Equipped with an acess slot to facilitate withdrawal of documents and retaining stops to prevent the drawers from sliding out.Useful capacity of a drawer : 333 x 250 x H 44 mm or 450 sheets (80 g).Stackable. Anti-skids pads provided.Overall dimensions: 292 x 386 H 246 mm. 100% recyclable high quality plastic PS.