Chains & Reciprocating Saw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. The quality and speed of cut is dependent on the pitch and the material being cut. Lubricant or grease may be required to reduce friction and dissipate heat when cutting some materials. To be used with reciprocating and sabre saws.

Circular Saw Blade / 140 mm Blade Diameter / Cutting Width 2.4 mm

A comprehensive selection of circular saw blades for all makes and models of portable circular saw.A wide range of sizes from 140mm - 355mm and tooth counts from 10 to 60, the range covers applications from coarse rip and cross cutting to extra fine cross cutting.Features:- Fully hardened and tensioned blades absorb impact and remain flat and true- High grade tungsten carbide with low wear rate for extended blade life- Precision honed for a sharper longer lasting edge- Thin kerf for less waste and reduced feed pressureSpecifications:Bore (B) - 30 mmDiameter (D) - 190 mmKerf (K) - 2.2 mmRake (R) - 20 ºThickness (T) - 1.4 mmTooth Count - 24 Material Type - Wood

Features:- Carbide teeth for stability and lasting performance- Alternate Top Bevel (ATB) tooth geometry for effective rip and cross cuts.- Expansion slots for low vibration as well as noise and heat reduction.- Fits standard circular saws from most brands.Specifications:- Blade diameter mm: 190- Bore mm / Bore with reduction ring: 20/16- Cutting width mm: 2.2- Number of teeth: 40

Irwin Sabre Saw Blades 956R Nail Embedded Wood offer superior construction and design making them faster cutting and longer lasting. These blades cut nail embedded wood and are suitable for use with materials 5mm (3/16 Inch) and thicker. Length 225mm. Teeth 6 tpi. Irwin Sabre Saw Blades 956R Nail Embeded Wood Pack of 5. Length 225mm. Teeth 6 tpi.

Circular Saw Blade / 180 mm Blade Diameter

Circular Saw BladeSpecifications:- Suitable For Materials: Wood- Blade Diameter: 16.5 Cm- Thickness: 1.2 Mm- Bore Size: 2 Cm- Number Of Teeth: 12- Cutting Width: 1.7 Mm- Cutting Result: 1

Construction saw blades are suitable for first fix application where cut finish is less important and re-used timbers are often used. Teeth on these blades are designed to resist damage should they impact foreign objects such as embedded nails and concrete. Please note Generic image shown for illustration purposes only. Specifications will vary depending on blade type. Features & Benefits • Extremely robust, solid construction site sheets for the toughest requirements • Designed for rapid cutting of natural woods and composites, as well as framework • Ideal for simples to good transverse and longitudinal cutting results • Ribbed heat vents allow blade to run cooler, reducing …

Features:Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood:- Base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy- Expansion slots lower vibration during use, which dampens noise and reduces heat development- Hand-held saws: blade with ATB/FT tooth geometry for quick cuts in wood. Equivalent blade for table saws has ATB teeth- Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood- High-quality precision-ground carbide teeth make the blade robust for rapid cutting- It is compatible with hand-held and table saws.Specifications:- Outer diameter mm: 165- Bore size mm: 20- Width of cut (b1) mm / …

The Starlock ACZ 100 SWB blade provides fast cuts in various rigid soft materials. It has a serrated blade enabling the edge points to grab and dig into the material for faster results than with standard smooth cutting edges. Its wide 100 mm diameter tackles a larger surface area for dynamic material removal, providing rapid work progress. It can make fast flush cuts in protruding insulation materials and cuts insulation panels and cardboard to size, along with soft materials such as linoleum, carpet and putty materials. When cutting non-hardened metals and abrasive materials, the BIM (bi-metal) combination of an HCS (high carbon steel) blade and HSS (high-speed steel) teeth resists wear and …

Circular Saw Blade / Quantity 1 Piece

Bosch Optiline Wood Circular Saw Blades:The Optiline Wood Circular Saw Blade Delivers Precise Quality Cuts In All Types Of Wood. Its High-Quality Precision-Ground Carbide Teeth Enable Clean Cuts, While Its Base Blade Made Of Dimensionally Stable Sk5 Hardened Steel (> 40 Hrc) Ensures Accuracy. Furthermore, The Blade´S Expansion Slots Lower Vibration During Use, Which Dampens Noise And Reduces Heat Development. Use This Saw Blade In All Types Of Wood And Wooden Materials. It Is Compatible With Hand-Held, Mitre, Sliding Mitre And Table Saws. Depending On The Number Of Teeth, Different Results Can Be Achieved With All Optiline Wood Circular Saw Blades, Which Feature Atb (Alternate Top Bevel) Tooth G…

Sabre Saw Blade / Quantity 5 Piece / 200 mm Blade Length