Chains & Reciprocating Saw Blades

Replacement DEWALT Oregon Chainsaw Chain for the DEWALT DCM575 XR FlexVolt Chainsaw. Made from high-grade materials. 1 x DEWALT DT20663 Oregon Chainsaw Chain 40cm (16in)

A comprehensive selection of circular saw blades for all makes and models of portable circular saw.A wide range of sizes from 140mm - 355mm and tooth counts from 10 to 60, the range covers applications from coarse rip and cross cutting to extra fine cross cutting.Features:- Fully hardened and tensioned blades absorb impact and remain flat and true- High grade tungsten carbide with low wear rate for extended blade life- Precision honed for a sharper longer lasting edge- Thin kerf for less waste and reduced feed pressureSpecifications:Bore (B) - 30 mmDiameter (D) - 190 mmKerf (K) - 2.2 mmRake (R) - 20 ºThickness (T) - 1.4 mmTooth Count - 40Material Type - Wood

Makita B-62985 circular saw blade 16.5 cm 1 pc(s)

Makita Replacement Chain for Makita Chainsaw UC011G / UC015G. Features & Benefits • For models UC011G and UC015G Specifications • Chain Bar Length: 35cm • Number of Drive Links: 59 • Chain Division: 0.325” • Chain Gauge: 1.1mm • File Diameter: 4mm • Quantity: 1

Einhell TCT Circular Saw Blade. Features & Benefits • Suitable for wood-based materials Specifications • Diameter: 250mm • Teeth: 24 • Bore Size: 30mm • Einhell Partcode: 49589341

Einhell TCT Circular Saw Blade. Features & Benefits • Suitable for wood-based materials Specifications • Diameter: 250mm • Teeth: 48 • Bore Size: 30mm • Einhell Partcode: 49589351

Oregon 95VPX Micro Lite chainsaw chains offer narrow kerf cutting, which requires less saw power than standard cutting systemsFeatures:- Micro-Chisel cutters have small-radius working corners that cut fast and are easy to sharpen.- Vibe-Ban chassis design reduces vibration 25% or more at the handles.- Bumper drive links reduce kickback.- Lubrilink tie straps help keep oil where it is needed-on the chain.- Lubriwell oil holes in bumper drive links help carry oil around the full length of the guide bar’s groove.- Recommended for saws from 35 to 55cc for bars from 13 to 18 (33 to 45cm). Specifications: Number of Drive Links: 78Gauge: 0.05 inches (1.3mm)How do I measure the length of my chain? Th…

Bosch 2608900563 Expert T141HM Jigsaw Blades - cut materials that other blades simply can't The Bosch 2608900563 is a 3 Pack of T141HM Blades suited to cutting glass fibre, reinforced plastic (5-20 mm), plasterboard and fibre cement boards (5-50 mm). Tough materials require a tough jigsaw blade - but you also need it to cut well. Worn out blades don't get the job done, so longevity and quality go together with the EXPERT 'Fiber Plaster'. Its carbide teeth cut the toughest abrasive materials such as cement fibreboard, plasterboard and glass fibre reinforced plastics. And they keep going for maximum productivity. The Bosch EXPERT 'Fiber Plaster' Jigsaw Blade is designed to make repeated cuts in …

The Optiline Wood Circular Saw Blade Delivers Precise Quality Cuts In All Types Of Wood. Its High-Quality Precision-Ground Carbide Teeth Enable Clean Cuts, While Its Base Blade Made Of Dimensionally Stable Sk5 Hardened Steel (> 40 Hrc) Ensures Accuracy. Furthermore, The Blade´S Expansion Slots Lower Vibration During Use, Which Dampens Noise And Reduces Heat Development. Use This Saw Blade In All Types Of Wood And Wooden Materials. It Is Compatible With Hand-Held, Mitre, Sliding Mitre And Table Saws. Depending On The Number Of Teeth, Different Results Can Be Achieved With All Optiline Wood Circular Saw Blades, Which Feature Atb (Alternate Top Bevel) Tooth Geometry: When Equipped With A High Tooth C…

Features:- Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood- Base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy- Expansion slots lower vibration during use, which dampens noise and reduces heat development- Optiline Wood Circular Saw Blades have ATB tooth geometry: high tooth count for clean results, low tooth count for solid- Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count, the blade delivers clean cuts, whereas a low number of teeth guarantees solid and efficient cuts.…

HCS blades with a serrated edge for cutting fibre insulation materials.

Upgrade Your Woodworking Efficiency with the Dewalt DT10640 Extreme Framing Circular Saw Blade Discover the Dewalt DT10640 Extreme Framing Circular Saw Blade, an essential part of the Elite Series designed to elevate your woodworking projects. Crafted to last, this 165mm, 40-tooth blade is ideal for precise decorative wood cutting such as skirting boards, dado rails, and architraves. The ultra-sharp carbide teeth and anti-vibration slots provide a superior cut finish, reducing splintering and ensuring precise results. The anti-kickback design reinforces the carbide tip for enhanced impact resistance, making every cut smooth and accurate. Made with premium-grade carbide, this blade can be easily re…

The Dewalt DT1945 Construction Circular Saw Blade has ultra-sharp cutting edges This general-purpose circular saw blade can handle cutting rough timber and nail-embedded wood. With a thin kerf and ultra-sharp cutting edges to reduce splinters. The thin kerf blade design gives more cuts per charge by minimising battery drain. Tungsten carbide-tipped for resistance to chipping and cracking.  Features:   
- Anti-kickback shoulder 
- Portable General Purpose Blade
- Ultra-sharp cutting edges - splinter reduction 
- Construction grade carbide- resists chipping and cracking  Specification:  
- Weight: 0.5kg 
- Tooth Count: 40
- Bore Size: 30mm
- Rake Angle: +10° 
- Plate Thickn…

Dewalt DT1953 Construction Circular Saw Blade 216mm x 30mm x 40T This general purpose circular saw blade can handle cutting rough timber and nail-embedded wood. With ultra-sharp cutting edges to reduce splinters. Alternate top bevel teeth with an optimised -5° rake angle. Tungsten carbide-tipped for resistance to chipping and cracking. Features:
- Anti-kick back shoulder
- Construction grade carbide- resists chipping and cracking
- Ultra sharp cutting edges - splinter reduction Specification:
- Blade Diameter: 216 mm
- Bore: 30 mm
- Plate Thickness: 1.7 mm
- Kerf Thickness: 2.6 mm
- Tooth Count: 40
- Grind Type: Alternate Top Bevel
- Rake Angle: -5°
- Weight: 1.5kg…