Nails, Screws, Fasteners Stanley

High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer.20mmGauge/Diameter (mm) 15 Ga Box 3000High Carbon Zinc Dichromate Suits: SB-HC50FNAdditional Information:• Type: Hardened Nails• Size: 20mm

High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer.30mmBox 1500High Carbon Zinc Dichromate Additional Information:• Type: Hardened Nails• Size: 30mm

High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer.40mmGauge/Diameter (mm) 15 Ga Box 1500High Carbon Zinc Dichromate Suits: SB-HC50FNAdditional Information:• Type: Hardened Nails• Size: 40mm

High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer.50mmGauge/Diameter (mm) 15 Ga Box 1500High Carbon Zinc Dichromate Suits: SB-HC50FNAdditional Information:• Type: Hardened Nails• Size: 50mm

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A pack of 1000 32 mm 16 gauge Straight Finish nails. Length : 32 mm.Pack Size : Clam pack of 1000.Additional Information:• Type: Nails• Size: 32mm• Finish: Galvanised• Pack Qty.: 1000

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 32 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 32 mm.Pack : Box of 2500.Additional Information:• Type: Nails• Size: 32mm• Finish: Galvanised• Pack Qty.: 2500

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A pack of 1000 38 mm 16 gauge Straight Finish nails. Length : 38 mm.Pack Size : Clam pack of 1000.Additional Information:• Type: Nails• Size: 38mm• Finish: Galvanised• Pack Qty.: 1000

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 38 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers. Length : 38 mm.Pack : Box of 2500.Additional Information:• Type: Nails• Size: 38mm• Finish: Galvanised• Pack Qty.: 2500

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A pack of 1000 45 mm 16 gauge Straight Finish nails. Length : 45 mm.Pack Size : Clam pack of 1000.Additional Information:• Type: Nails• Size: 45mm• Finish: Galvanised• Pack Qty.: 1000

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 44 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers. Length : 44 mm.Pack : Box of 2500.Additional Information:• Type: Nails• Size: 44mm• Finish: Galvanised• Pack Qty.: 2500

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A pack of 1000 50 mm 16 gauge Straight Finish nails. Length : 50 mm.Pack Size : Clam pack of 1000.Additional Information:• Type: Nails• Size: 50mm• Finish: Galvanised• Pack Qty.: 1000

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 50 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 50 mm.Pack : Box of 2500.Additional Information:• Type: Nails• Size: 50mm• Finish: Galvanised• Pack Qty.: 2500

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 56 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 56 mm.Pack : Box of 2500.Additional Information:• Type: Nails• Size: 56mm• Finish: Galvanised• Pack Qty.: 2500

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 65 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 65 mm.Pack : Box of 2500.Additional Information:• Type: Nails• Size: 65mm• Finish: Galvanised• Pack Qty.: 2500

BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 15mm.Colour : Brown.Pack : Clam pack of 1000.Additional Information:• Type: Brad Nails• Size: 15mm

BT Series galvanised 18 gauge brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 15 SKU BT1315GA Finish GALV Description MINIBRADS 15 GALVA 5M Qty per box 5000Additional Information:• Type: Brad Nails• Size: 15mm

BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 19mm.Colour : Brown.Pack : Clam pack of 1000.Additional Information:• Type: Brad Nails• Size: 19mm

BT Series galvanised 18 gauge brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 20 SKU BT1320GA Finish GALV Description MINIBRADS 15 GALVA 5M Qty per box 5000Additional Information:• Type: Brad Nails• Size: 20mm

BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 25mm.Colour : Brown.Pack : Clam pack of 1000.Additional Information:• Type: Brad Nails• Size: 25mm

BT Series galvanised 18 gauge brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 25 SKU BT1325GA Finish GALV Description MINIBRADS 15 GALVA 5M Qty per box 5000 Additional Information:• Type: Brad Nails• Size: 25mm

BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 30mm.Colour : Brown.Pack : Clam pack of 1000.Additional Information:• Type: Brad Nails• Size: 30mm

BT Series galvanised 18 gauge brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 30 SKU BT1330GA Finish GALV Description MINIBRADS 30 GALVA 5M Qty per box 5000Additional Information:• Type: Brad Nails• Size: 30mm

BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 32mm.Colour : Brown.Pack : Clam pack of 1000.Additional Information:• Type: Brad Nails• Size: 32mm

BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 35mm.Colour : Brown.Pack : Clam pack of 1000.Additional Information:• Type: Brad Nails• Size: 35mm