Other Sound & Hi-Fi

premium Material: The Ball Type Foam Microphone Windscreen Is Soft And Thick, Has Good Elasticity And Shrinkage, Comfortable On The Microphone. This Type Of Microphone Windscreen Has A Higher Density Than Comparable Microphone Covers To Protect Your Microphone From Wind Interference And Other Noiseeasy To Use: Pack Of 15 Microphone Covers, Approx. 30 X 22 X 7.5 Mm, Suitable For Most Standard Handheld Microphones. Easy Installation Without Tools, Convenient For You To Store And Apply, Enough For Use For A Long Time And Meet Your Replacement Needs In Daily Lifeunique Design: These Microphone Wind Covers Can Keep Your Microphone Away From Saliva And Moisture Influences, Allow You To Use The Microphone …

Unidirectional Wired Handheld Mic Microphone Mic Vocal Singing with XLR 3Pin Microphone Mic Features: - Cardioid Microphone Mic - this wired Microphone Mic offers cardioid pickup pattern, capturing source signal. - Solid and durable - this wired Microphone Mic Body is made of plastic, making it solid and durable. - The metal mesh Microphone Mic can effectively translate the sound into sound head models and eliminate "pop" Noise. - The XLR is protected by metal spring rings, making the cable more durable and avoids bending when moving and swinging the cable. - Full compatibility - this dynamic handheld microphone fully supports various devices, such as DVDs, KTV audios, amplifiers,…

The Adam Hall 19 U Shaped Rack Panel With 24 D Type XLR Holes is an ideal panel for connecting XLR sockets to your 19 racks. The panel features holes for 24 D type XLR connectors letting you easily create DIY patchbays or add extra connections to your racks. The steel powder coated construction is lightweight and robust giving you reliable design in any rack set up on stage or in the studio. The lightweight design is easy to install with any standard 19 rack set with screws.

1. For connecting a mobile phone or any other device with a standard 3.5mm stereo output into a 5 pin din input. 2. 5 Pin din male plug. 3. Suitable for MIDI interconnections. Pure copper conductors Din cables are most commonly used for Midi Audio equipment such as stereos.

1. For connecting a mobile phone or any other device with a standard 3.5mm stereo output into a 5 pin din input. 2. 5 Pin din male plug. 3. Suitable for MIDI interconnections. Pure copper conductors Din cables are most commonly used for Midi Audio equipment such as stereos.

Allows you to run up to 6 electronic devices on to one reliable power block from a power socket The additional length of cable gives you greater distance on devices plugged into the power block - UK standard distribution block - Optional wall mounting holes provided (keyhole type at rear) - Plug & mains distribution block conform to BS1363/A - Cable conforms to European Standard - The 13 amp fuse conforms to BS1362 - Manufactured under an ISO9001: 2000 quality system - Lifetime cable warranty

Flush Mount Speaker / Power Rating (RMS) 10 Watt / Impedance 8 Ohm

Features: Durable and Eco-friendly: This 2-piece vinyl record clip is made of durable card paper with a built-in velvet surface. It"s eco-friendly and clean, designed to last for long-term use. Easy to Use: This record clip is easy to use and leaves no fingerprints on your records. It ensures that your vinyl records are not damaged, making it a safe choice for your precious collection. Lightweight and Portable: This record clip is lightweight and easy to store. It"s compact and portable, making it a convenient tool for vinyl record enthusiasts. Suitable for LP Records: This clip is suitable for vinyl LP records. It"s a must-have accessory for audiophiles and can help enhance your music

Universal power adapter, which can be used to power various effects requiring 9V. The current consumption is 200 mA. The connector is 5.5 mm / 2.1 mm thick with polarity (-) inside. Current (mA): 200.0 Voltage: 9V Current: 0,2 A Made in: China Number of Outputs: 1 Plug Type: Barrel ChargerType: Power Supply Polarity: Center Minus Variant: 0,2 A

Universal power adapter, which can be used to power various effects requiring 9V. The current consumption is 300 mA. The connector is 5.5 mm / 2.1 mm thick with polarity (-) inside. Current (mA): 300.0 Polarity: Center Minus ChargerType: Power Supply Variant: 0,3 A Made in: China Voltage: 9V Number of Outputs: 1 Current: 0,3 A Plug Type: Barrel

Universal power adapter, which can be used to power various effects requiring 9V voltage. With a current consumption of 1000 mA, you can easily drive more effects at the same time. The connector is 5.5 mm / 2.1 mm thick with polarity (-) inside. Current: 1 A Number of Outputs: 1 Made in: China Voltage: 9V Plug Type: Barrel Current (mA): 1000.0 ChargerType: Power Supply Polarity: Center Minus Variant: 1 A

Cable with XLR Male connector and with XLR Female connector, 3m long. Colour: Black Type-A Connector: XLR Male Length: 3 m Type-B Connector: XLR Female ~ Length: 3 m Made in: China

Chassis Full-Range / Power Rating (RMS) 2 Watt / Impedance 8 Ohm

Features: 1.Our belts are made of high quality rubber. 2.Fit for most kinds of belt-driven recorder and fit for your demands well. 3.The different specifications turntable belts is mainly applied to make record player rotate smoother, restore turntable speed and reduce noise as well. Specifications: Material:Rubber Color:Black Size: Width:4mm/0.15inch The half-fold size 40-135mm, probably contains:40/45/50/60/65/75/80/90/95/105/115/120/125/130/135mm Weight:19g Pls feel free to contact us if you have any question. Note: Please allow minor deviation due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Package Include: …