Car Subwoofers

BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s) HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an …

SWT-10S4 - Alpine 10" 350W RMS Single 4-Ohm Truck Subwoofer 10" truck subwoofer with 4-ohm voice coil Power handling: 350 watts RMS (1000 watts peak) Frequency response: 30-200 Hz Mounting depth: 4-3/16"

Membrane diameter: 165 mm Capacity: 180/90 Watt RMS/Max Impedance: 4ohm Mounting Depth: 63 mm

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

On b W O or fe R 40hz-400hz Rear High Pass 50hz-1.5Khz Front high pass 50hz-7.5Khz.

Power Range: 100W - 350W RMS Power Handling: 350 Watts Peak Power Handling: 1000 Watts Frequency Response: 30Hz - 200Hz Material: Poly-Mica Dust Cap & Pulp-Kevlar

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Diameter 250 mm / 10 Inch / 360 watt / Nominal Load 150 Watt / Impedance 4 Ohm

12 inch subwoofer 4 ohm impedance Blue LED illumination from inside the cone Best suited for 0.65 cubic foot sealed or 1.5 cubic foot ported enclosure Provides more wiring configuration possibilities. If you add subs, the wiring configurations can be easily matched to optimize the amp's power output and the power handling.

Car Subwoofer Speaker / Diameter 254 mm / 10 Inch / Mounting Depth 89 mm / 600 watt / Nominal Load 300 Watt / 83 dB / Impedance 2 x 4 Ohm

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

[Portable and safe design] It’s small and lightweight, compact and easily portable, perfect for travelling. It contains internal protection mechanisms, and a hidden blue LED power indicator to let you know when your phone is charging. [2-Port USB ] Our 2 USB ports have 24W/4.8a power and allows you to charge two devices simultaneously, at top speed! [Compatibility] Compatible with Phone X/8/7/7 Plus, Phone 6S/6S Plus, Phone 6/6 Plus, Phone 5/5S/5C/se, Pad Pro, Pad Air 1/2, pad Mini 1/2/3, Pod Nano7, Pod Touch and more Apple devices.

Woofer / Mounting Depth 85 mm / 200 watt / Nominal Load 100 Watt / 83 dB / Impedance 8 Ohm

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

High Quality Caraudio Enjoy the best music experience Excellent Sound Quality