Car Subwoofers

Protect your sound investment with these stylish grilles from Kicker. Works for Kicker CompR 12" Subwoofers Covers screws for a sleeker, cleaner install.

300 Watts RMS 1300 Watts Max PP Cone Rubber Surround Steel Basket

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s) HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an …

Flat Subwoofer / Diameter 200 mm / Nominal Load 150 Watt

SWT-10S4 - Alpine 10" 350W RMS Single 4-Ohm Truck Subwoofer 10" truck subwoofer with 4-ohm voice coil Power handling: 350 watts RMS (1000 watts peak) Frequency response: 30-200 Hz Mounting depth: 4-3/16"

Gehäusesubwoofer

Ground Zero Gzta bass emote bass level controls Gzia/Gzta/Gzha/Gzna ground Zero power amplifiers

Sensitivity SPL (1W / 1m) 86 dB, Resonant Frequency 44 Hz Poly Injection Cone, 2 Inch Copper Voice Coil, Rubber Surround Sealed Enclosure Internal Volume: .75 Cubic Feet 3.9 Inch Mounting Height, 11 Inch Mounting Hole Diameter Dimensions: Depth 13” x Width 13” x Height 4.5”

Bundle includes: 2 Rockford Fosgate P2D4-12 12” Subwoofer - DVC (dual 4-Ohm), 400 Watts Rms, 800 Watts Peak Dual linear spider with embedded 16 AWG tinsel leads Custom 10-AWG nickel plated push terminals Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)

Power Range: 100W - 350W RMS Power Handling: 350 Watts Peak Power Handling: 1000 Watts Frequency Response: 30Hz - 200Hz Material: Poly-Mica Dust Cap & Pulp-Kevlar

High Quality Caraudio Enjoy the best music experience Excellent Sound Quality

Sensitivity SPL (1W / 1m) 88 dB, Resonant Frequency 28 Hz Polypropylene & Paper Cone, 2 Inch Aluminum Voice Coil, Rubber Surround Sealed Enclosure Internal Volume: .65 Cubic Feet, Ported Enclosure Internal Volume: 1.5 Cubic Feet 1.5" x 12.5" Slotted Inch Port Dimension , 30 Inch Port Length, 35 Hz Port Frequency Dimensions: Depth 12.5” x Width 12.5” x Height 6.4” 3 Year Platinum Online Dealer Warranty

Car Subwoofer Speaker / Diameter 254 mm / 10 Inch / Mounting Depth 89 mm / 600 watt / Nominal Load 300 Watt / 83 dB / Impedance 2 x 4 Ohm

Made for marine use: Life on the water can be hard on audio gear, with sun, spray, salt, and extreme temperatures, not to mention post-cruise washdowns and the occasional loose fish on the deck. This rugged JBL sub is ready for it all, with a one-piece polymer basket, marine-ready componentry, stainless steel mounting hardware, and a sealed, UV-resistant grille that will stand up to spray and sunlight for years to come. IPx5 Rated: Marine-grade materials & components to suit the demands of a harsh outdoor environment with an IPx5 marine rating Power handling: 200 watts RMS (600 watts peak power) / Sensitivity: 88 dB at 2.83 volts / Frequency response: 30-250 Hz / Impedance: 4 ohms Available …

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

Woofer / Mounting Depth 85 mm / 200 watt / Nominal Load 100 Watt / 83 dB / Impedance 8 Ohm

V Cone with pressed paper membrane for maximum lightness High excursion foam surround combining high sensitivity and deep bass response Designed to be used in small sealed or reflex box ABS gasket provided for aesthetically pleasant installation Continuous 250 W power handling