Drum Accessories Tama

The ultimate low-volume alternative. Tamas Mesh Heads are perfect for rehearsing in the comfort of your own home without disrupting others. And they offer an experience as realistic as traditional drum heads. Their woven single-ply construction provides excellent response - your sticks will rebound with plenty of purpose. Not only perfect for acoustic kits these Mesh Heads are also ideal for use alongside triggers on electronic kits - theyre much more authentic than rubber pads. Low-volume alternatives dont come much better than Tamas range of Mesh Heads. Practise those all-important fills and back beats without the neighbours nagging...

The Tama Steel 13 20 Strand Snare Wire with Starclassic Logo is a high quality snare wire from Tama featuring 20 strands of carbon steel that provides a powerful response and shell sound as well as being incredibly durable and long lasting. Tama have redesigned the angle of the end plates on the wires and made the straps thinner resulting in the optimum response available. The Tama Starclassic logo is featured on the end plates. These wires are suitable for regular 13 snare drums.

The Tama Steel 14 Snare Wire 20 Strand is a high quality snare wire from Tama featuring 20 strands of carbon steel that provides a powerful response and shell sound as well as being incredibly durable and long lasting. The carbon steel used in Tamas snare wires improve your snare drums sensitivity allowing you to play and be heard at all volumes and speeds. These wires are suitable for regular 14 snare drums.

The Tama Steel 14 Starclassic Snare Wire 20 Strand is a high quality snare wire from Tama featuring 20 strands of carbon steel that provides a powerful response and shell sound as well as being incredibly durable and long lasting. Tama have redesigned the angle of the end plates on the wires and made the straps thinner resulting in the optimum response. The end plates are made from bell brass for greater sensitivity. The Tama Starclassic logo is featured on the end plates. These wires are suitable for regular 14 snare drums.

Gain control of your sound. The Tama 14" Ultimate Steel 3mm 10 Lug Mighty Hoops Snare Side allows you to find the perfect tuning for your drum. Designed to fit 14 inch drum shells the ten hoops reduce sustain resulting in a tightly controlled drum sound. The hoop is designed for the top side of the drum ensuring a consistent playing surface for you to perform on. This is achieved using a 3mm steel design suitable as either a replacement or spare part to your drum kit.

Durability performance and comfort. The Holy Trinity of drum stools. Tamas HT230 1st Chair Drum Throne offers it all and at an astounding price point. The HT230 features a comfortable padded round seat with a rugged black vinyl covering. But its the thrones underside that impresses the most. The 1st Chair design provides the best of both worlds: the precise height adjustment of threaded rod thrones and the fast adjustment of T-bolted systems. And as youd expect the HT230s double-braced legs guarantee robustness and stability in any setting. Drum thrones are perhaps the most important part of a kit and this one will ensure you perform at your very best. At this price its the easiest hardware …

Saddle drum chair from Tama. TAMA's 1st chair drum throne provides unparalleled durability and comfort, combined with maximum playability. The HT250 features a saddle seat made using a strongly molded foam cushion that will hold its shape for years.
Stability is ensured by Tama's double-braced tripod legs and Seat Link throne top/base connection unit, which grips the entire circumference of the seat post and solid rubber feet.
The 1st chair height adjustment offers the best of both worlds - the precision of a threaded rod coupled with the quick adjustment of a T-bolt system.
Made in: Vietnam

The Ergo Rider provides absolute ergonomic comfort and support. The hybrid of a round seat and a saddle style seat, it offers the maneuverability of the former, and the playing support of the latter. The front cutaway allows unimpeded thigh movement even during the most rapid double bass patterns. Details:Height adjustable range: 515mm-665mm (20 1/4" – 26 1/8"). Color: Black.
Made in: China

The Ergo Rider provides absolute ergonomic comfort and support. The hybrid of a round seat and a saddle style seat, it offers the maneuverability of the former, and the playing support of the latter. The front cutaway allows unimpeded thigh movement even during the most rapid double bass patterns. Details:Height adjustable range: 505mm-660mm (19 7/8" - 26"). Color: Black.
Made in: China

The Wide-Rider's front cutaways allow unimpeded movement for your thighs, for drummers who prefer this style. The Wide-Rider is available with a durable PVC seat (HT530B), or a cloth top seat (HT530BC). Details:Height adjustable range: 485mm-640mm (19" – 25 1/4"). Color: Black.
Made in: China

The Wide-Rider's front cutaways allow unimpeded movement for your thighs, for drummers who prefer this style. The Wide-Rider is available with a durable PVC seat (HT530B), or a cloth top seat (HT530BC). Details: Height adjustable range: 485mm-640mm (19" – 25 1/4"). Color: Black.
Type: Saddle-Style
Maximum Height: 640 mm
Colour: Black
Made in: China
Minimum Height: 480 mm

Transform your snare drum. If youre looking for an injection of powerful traditional tones for your snare Tamas 42 Strand Snappy Snare Wire is the answer. Whether its a restoration project upgrade or time for a refresh the Snappy Snare Wires 42 carbon steel strands provide loose powerful and fat sounds. Compatible with 14" drums their added sensitivity allows your snare to breathe and fully articulate itself with great response - certain to shrine through any musical mix. Its hand-soldered end plates offer increased durability ensuring the wires remain effective for a long time.

The Tama Drum Rug featuring the TAMA 50th Anniversary Logo is a limited edition drum rug designed to commemorate 50 years of Tamas excellence in the music industry. Crafted with durability in mind this rug keeps your drum kit firmly in place allowing you to rock out with confidence. Constructed with a sturdy rubber underside this drum rug provides exceptional traction on any surface ensuring that your kit stays put even during your most enthusiastic performances. No more worries about your drum kit sliding or shifting as you play. In addition to its practicality this drum rug also boasts an original 50th anniversary design adding a touch of class and uniqueness to your drumming setup. With its …

Designed to hold essential items for any performance, the TAT10 Accessory Tray includes a cup holder, unique edges specially shaped for drumsticks, and S-hooks to hang bags or other items. Covered in non-slip felt, the tray features 6 passthroughs for clean cable management. Additionally, the tray comes wth 4 poles to attach to an MC61 clamp as well as 5/8" microphone threading on the underside for even greater set-up flexibility. •Tray size (inside dimension): 235mm (9-1/4") x 254mm (10")•Drink holder: up to diameter 90mm (3-1/2")•Includes MC61 FastClamp for connecting stands with pipes from 15.9mm to 28.6mm in diameter.•Includes 2- S-Hooks for hanging bags•Rims can …

The Tama CCA30-T cymbal holder and clamp is a combination of a boom cymbal holder and the MC61 multi-clamp allowing you to easily add cymbals to your setup. It connects to stands between 19.1mm and 28.6mm in diameter and keeps your cymbals firmly in place. The CCA30-T features the FastClamp easy setup system which makes setting up much faster. Simply open the FastClamp like a clothes peg close it around the stand and then tighten the T-bolt while the FastClamp holds the clamp in place. Finished in chrome it compliments any current hardware or shell finish.

This cymbal holder with a pipe diameter of 19.1mm can be attached to stands using either the MC61 or MC62 multi-clamp. The CA30EN is a professional-grade model equipped with a conversion function that allows the boom arm to be stored in the standpipe and also includes the Quick-Set Tilter for convenient and easy set-up. 450 mm (17 3/4 ") length.
Made in: China
Material: Steel

Cymbal holder that can be built into your setup in combination with multi-clamps and attachments. Bass Drum Mounted Cymbal Holder features telescoping arm & fine gear tilter, which allow you to adjust the angle and height of the cymbal as you like in smaller spaces.
Made in: China
Material: Steel

Bass Drum Beater

Bass Drum Beater

The Tama CB90F Iron Cobra Beater is a robust kick pedal capable of a quick responsive feel. Featuring a lightweight design it offers rapid response making it perfect for fast-paced drumming. The felt head ensures a softer strike reducing wear on your drumhead and producing a warm tone. While its mainly designed for the Tama Iron Cobra Kick Pedal its compatible with a range of other pedals offering versatile use for any setup. This beater is a solid choice for drummers looking to enhance their performance with precision and speed. Please Note: Kick Pedal NOT included.

The Tama CB90R Iron Cobra Beater is a robust kick pedal capable of a quick responsive feel. Featuring a lightweight design it offers rapid response making it perfect for fast-paced drumming. The rubber head ensures a low-end strike with an intense volume - ideal for metal drumming. While its mainly designed for the Tama Iron Cobra Kick Pedal its compatible with a range of other pedals offering versatile use for any setup. This beater is a solid choice for drummers looking to enhance their performance with precision and speed. Please Note: Kick Pedal NOT included.

Ideal for Iron Cobra pedals. Adjustable high-performance bass drum beater with wooden touch surface. Ultralight with extremely hard sound and excellent attack.
Material: Wood
Made in: China

Travel light and easy with the Tama Classic Hardware Pack With Bag. The pack features two cymbal stands a hi-hat stand and snare stand. The hi-hat and cymbal stands feature a classic flat base design that allows you to position the tripod base much lower and offers positioning in tricky spots that regular tripod stands cannot reach. All the Tama Classic stands feature a compact design for easy storage in the included bag. With the hardware weighing 7.4kg in total the Tama Classic Hardware Pack and bag make life on the road - and on stage convenient and easy.

Keep your kit in perfect condition - physically and tonally! The Tama Club-Jam Flyer Bag Set protects your drums from bangs and scratches that could damage their tonal potential. The bags are constructed from a 600 denier high-density water-resistant outer material that ensures your Club-Jam kit is protected in all weather conditions. The resistant outer layer is reinforced by a 10mm layer of cushion on the interior. The cushion provides a layer of shock absorption to prevent any shock damage to your drums as well as preventing any scratching to the paint or heads. The bags are equipped with comfortable ergonomic carry handles as well as a shoulder strap with shoulder pad - on all bags apart …