Nails, Screws, Fasteners TIMCO

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Ideal for Hardwood, Softwood, Chipboard, MDF, Thin Sheet Metal and Plastic. Specifications • Size: 4 x 70mm • Length: 16cm • Width: 14cm • Height: 11.8cm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 500

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. These are ideal for Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal. Specifications • Size: 5 x 80mm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 350

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Ideal for Hardwood, Softwood, Chipboard, MDF, Thin Sheet Metal and Plastic. Specifications • Size: 6 x 100mm • Length: 16cm • Width: 14cm • Height: 11.8cm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 225

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle partial thread and high torque TX drive ensures maximum clamping strength on every fixing. Ideal for applications such as timber studwork, panelling, roof and decking framework. Specifications • Size: 4 x 40mm

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle partial thread and high torque TX drive ensures maximum clamping strength on every fixing. Ideal for applications such as timber studwork, panelling, roof and decking framework. Specifications • Size: 5 x 70mm

This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors. Features & Benefits• High-Low parallel threads for ease of insertion and high pull-out values • Removable & adjustable non-expansion through fixing • Unique concave thread configuration

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. These are ideal for Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal. Specifications • Size: 4 x 30mm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 1500

Crafted from high-quality copper, these nails offer exceptional durability and corrosion resistance, making them perfect for outdoor and marine environments. These nails feature a broad, flat head, providing superior holding power and preventing pull-through. This design is especially beneficial for securing roofing felt, shingles, and insulation boards. The copper material not only ensures long-lasting performance but also adds a touch of aesthetic appeal, ideal for visible installations in furniture making or decorative woodworking. These nails are easy to drive in and offer excellent grip, ensuring a secure and stable hold. The copper construction also makes them resistant to rust and tarnish,…

Used to secure plasterboard to wall/ceiling track systems with a max. of 0.6mm thickness.Features & Benefits• Bugle head to reduce likelihood of damaging the board surface • 25° super sharp point for ease of penetration • 60° twin-thread offers excellent pull-out values and insertion speed

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. These are ideal for Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal. Specifications • Size: 5 x 40mm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 800

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications. Features & Benefits• Long lasting withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012 • Helix shank for removing debris and to improve clamping • 50° deep single thread to provide a secure fixing with high pull-out resistance • Single slash point to reduce torque and the risk of timber splitting at low edge distance • 25° sharp po…

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Ideal for Hardwood, Softwood, Chipboard, MDF, Thin Sheet Metal and Plastic. Specifications • Size: 4 x 60mm • Length: 16cm • Width: 14cm • Height: 11.8cm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 600

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. These are ideal for Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal. Specifications • Size: 5 x 70mm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 375

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. Nuts not included. • Plated in Trivalent Chromium (Cr3) Zinc • Manufactured from grade 8.8 carbon steel

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Ideal for Hardwood, Softwood, Chipboard, MDF, Thin Sheet Metal and Plastic. Specifications • Size: 5 x 90mm • Length: 16cm • Width: 14cm • Height: 11.8cm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 325

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. These are ideal for Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal. Specifications • Size: 5 x 100mm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 300

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle partial thread and high torque TX drive ensures maximum clamping strength on every fixing. Ideal for applications such as timber studwork, panelling, roof and decking framework. Specifications • Size: 5 x 50mm

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle partial thread and high torque TX drive ensures maximum clamping strength on every fixing. Ideal for applications such as timber studwork, panelling, roof and decking framework. Specifications • Size: 5 x 100mm

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. These are ideal for Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal. Specifications • Size: 4 x 5mm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 800

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. These are ideal for Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal. Specifications • Size: 5 x 60mm • Material: Carbon Steel • Finish: Zinc & Yellow • Recess Type: Pozi • Head Type: Double Countersunk • Driver Bit Size: PZ2 • Pack Quantity: 400

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. Nuts not included. • Plated in Trivalent Chromium (Cr3) Zinc • Manufactured from grade 8.8 carbon steel

This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors. Features & Benefits• High-Low parallel threads for ease of insertion and high pull-out values • Removable & adjustable non-expansion through fixing • Unique concave thread configuration

Hex Head self drilling screws, for joining roofing sheets to light gauge steel without the need to pre-drill a hole. Specification • Diameter: 5.5mm • Length: 45mm • Pack Qty: 500 • Colour/Plating: Zinc • Max Drill Thickness: 3mm • Size (Imperial): 12 x 1 3/4Features & Benefits• Hex Head with integral washer to increase clamping effectiveness • Coarse Thread • Classic Point for drilling into metals without the need for pre-drilling

Hex head self-drilling screws, for joining roofing sheets to light section steel (Max. 5.0mm) without the need to pre-drill a hole.Features & Benefits• Exterior plating gives a reliable and durable corrosion resistant coating which resists 1,000 hours salt-spray