Routers & Trimmers Trend

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 6.35mm cutting depth bearing guided trimmer for flush trimming of laminate and veneer work. Extra long shank allows the cutter to trim laminate and veneer on the underside of the workpiece. Also to form shallow rebates and slots with a template or guide. Double shank mounted bearings for increased surface contact for additional stability and control. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Double bearings for stability. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: …

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base 
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

TCT Two flute cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Features and Benefits: Two flutes give a clean finish to cut edges TCT plunge centre tip

Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut The Trend TR47X1/2TC Roman Ogee features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials and give extra long life. Features:
- PTFE coated, indicated by distinctive black colouring
- Can be used on hardwood & softwood, fibreboard, plywood and particle board
- Etched dimensions on extra long 40mm shanks, for quick identification
- By raising the cutter, the top quirk is removed  Specification:
- D1:  25.4mm
- C:  5/8 Inch
- C:  15.9mm
- OL:  64mm
- B:  9.5mm
- R1:  4mm
- Shank Diameter:  1/2 Inch

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications. The TR40D has a center tip for drilling abrasive materials. Dimensions Shank 1/2in Cutting Diameter (D) 15mm Cutting Length (C) 25mm

Trend TR30 Trade Shank Mounted Guided Profiler with extra-long shank ideal for trimming and profiling timber, man-made board. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board, and has the dimensions etched on the extra-long 40mm shanks, for quick identification. Specifications Shank 1/2in. Cutting Diameter 19.1mm. Cutting Length 50.0mm.

The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lipping&rsquos and plastic laminate edges. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring. The dimensions are etched on the extra-long 40mm shanks for quick identification. Specifications Shank 1/2in. Cutting Diameter 12.7mm. Cutting Length 25.4mm.

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter.

Two fute flush frimming fits with ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Features and Benefits Highly durable Tungsten Carbide construction Suitable for straight or shaped work Typical Applications Ideal for trimming and bevelling plastic laminate edges

Two fute flush frimming fits with ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Features and Benefits Highly durable Tungsten Carbide construction Suitable for straight or shaped work Typical Applications Ideal for trimming and bevelling plastic laminate edges

Two fute flush frimming fits with ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Features and Benefits Highly durable Tungsten Carbide construction Suitable for straight or shaped work Typical Applications Ideal for trimming and bevelling plastic laminate edges

Two fute flush frimming fits with ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Features and Benefits Highly durable Tungsten Carbide construction Suitable for straight or shaped work Typical Applications Ideal for trimming and bevelling plastic laminate edges

The Trend T18S/CH6A charges fast to minimise downtime and increase productivity This is a one charger fits all solution - It takes all Trend T18S TXLI 18V Tool Connection Batteries. Tough durable casing with protective side vents keeps the internal electronics safe. Features: FAST CHARGING 2Ah: 32mins, 4Ah: 48mins, 5Ah: 54mins AIR COOLED Reduces heat build-up for more efficient faster charging LED CHARGE INDICATORS Easy read indicators show Charging and Full Charge states PROTECTIVE SIDE VENTS Prevents dust and debris ingress Specification: Charging Current: 6A Charge Time: 2Ah Battery - 32 mins Charge Time: 4Ah Slimline Battery - 48 mins Charge Time: 5Ah Battery - 54 mins

Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.

Snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck. The HSS Drill Bits in this 7 piece set are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Contents. 1.6 mm (1/16in) Drill. 2.4 mm (3/32in) Drill. 3.2 mm (1/8in) Drill. 4.0 mm (5/32in) Drill. 4.8 mm (3/16in) Drill. 5.6 mm (7/32in) Drill. 6.3 mm (1/4in) Drill. With collets.

The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing. They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains 1 x 2.0mm (5/64in) Drill and C/S Size No.4. 1 x 2.4mm (3/32in) Drill and C/S Size No.6. 1 x 2.8mm (7/64in) Drill and C/S Size. No.8. 1 x 3.2mm (1/8in) Drill and C/S Size. No.10. 1 x 3.6mm (9/64in) Drill and C/S Size. No.12. Tungsten carbide tipped version, these tools can be used in abrasive materials such as laminated chipboard. The …

Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Specifications D1 3/16 inch D1 4.75 mm D2 1/2 inch D2 12.7 mm Shank Diameter 1/4 inch.

Precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D. 36mm Kerf. 2.5mm No. of Teeth. 2