Routers & Trimmers Trend

prices on 536 models

Trend

clear

Save List

Show

by rating

Trend T7EK

from £220.96 up to £299.99

Compare prices₂→

compare

soft start fine height adjustment case

vertical, 2100 W, up to 28000 rpm, stroke: 50 mm, soft start, fine height adjustment

Trend T5EB

275.10Buy!
£

MachineMart.co.uk

Report

compare

soft start auto-adjustment fine height adjustment

vertical, 1010 W, up to 27000 rpm, stroke: 50 mm, soft start, fine height adjustment

Trend T4ELK

from £59.99 up to £123.95

Compare prices₄→

compare

case

vertical, 760 W, up to 32000 rpm, stroke: 35 mm

Trend T4EK

from £85.00 up to £179.99

Compare prices₅→

compare

case

vertical, 850 W, up to 32000 rpm, stroke: 35 mm

Trend Bearing Guided Template Profiler Router Cutter 9.5mm 6.35mm 1/4" 46/

from £21.20 up to £26.95

Compare prices₅→

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 6.35mm cutting depth bearing guided trimmer for flush trimming of lamina more→te and veneer work. Extra long shank allows the cutter to trim laminate and veneer on the underside of the workpiece. Also to form shallow rebates and slots with a template or guide. Double shank mounted bearings for increased surface contact for additional stability and control. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Double bearings for stability. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: …

Trend UNIBASE Universal Sub-Base for Guide Bushes

from £25.79 up to £29.95

Compare prices₆→

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush more→fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

Trend Two Flute Cutter, 25mm Diameter

from £49.99 up to £63.99

Compare prices₆→

TCT Two flute cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Features and Benefits: Two flutes give a clean finish to cut edges TCT plunge centre tip

Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut

from £26.20 up to £51.95

Compare prices₆→

Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut The Trend TR47X1/2TC Roman Ogee features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials and give extra long life. Fea more→tures:
- PTFE coated, indicated by distinctive black colouring
- Can be used on hardwood & softwood, fibreboard, plywood and particle board
- Etched dimensions on extra long 40mm shanks, for quick identification
- By raising the cutter, the top quirk is removed Specification:
- D1: 25.4mm
- C: 5/8 Inch
- C: 15.9mm
- OL: 64mm
- B: 9.5mm
- R1: 4mm
- Shank Diameter: 1/2 Inch

Trend TR40D x 1/2 TCT Two Flute Cutter Long Shank 15 x 25mm TRETR40D12TC

from £34.95 up to £34.99

Compare prices₅→

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cuttin more→g the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications. The TR40D has a center tip for drilling abrasive materials. Dimensions Shank 1/2in Cutting Diameter (D) 15mm Cutting Length (C) 25mm

Trend TR30 x 1/2 TCT Shank Mounted Bearing Guided Profiler 19.1 x 50mm TRE

from £66.95 up to £72.99

Compare prices₅→

Trend TR30 Trade Shank Mounted Guided Profiler with extra-long shank ideal for trimming and profiling timber, man-made board. Features 2mm micro grain tungsten carbide tips, for cutting the most abras more→ive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board, and has the dimensions etched on the extra-long 40mm shanks, for quick identification. Specifications Shank 1/2in. Cutting Diameter 19.1mm. Cutting Length 50.0mm.

Trend TR28 x 1/2 TCT Bearing Guided Trimmer 12.7 x 50mm TRETR2812TC

from £58.95 up to £62.99

Compare prices₅→

The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lipping&rsquos and plastic laminate edges. Features 2mm micro grain tungsten carbide t more→ips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring. The dimensions are etched on the extra-long 40mm shanks for quick identification. Specifications Shank 1/2in. Cutting Diameter 12.7mm. Cutting Length 25.4mm.

Trend TR12 x 1/4 TCT Two Flute Cutter Long Shank 12 x 19mm TRETR1214TC

from £32.99 up to £36.95

Compare prices₅→

Trend T46/1 1/4" TC Trimming Cutter 15.9mm DIA

from £30.99 up to £36.95

Compare prices₅→

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Trend T46/04 1/4" TC Bearing Guided Trimmer Cutter 12.7mm

from £27.99 up to £31.95

Compare prices₅→

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter.

Trend T46/02 1/4" TC Trimming Cutter 9.5mm DIA

from £29.99 up to £33.95

Compare prices₅→

Two fute flush frimming fits with ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Features and Benefits Highly durable Tungsten Carbide co more→nstruction Suitable for straight or shaped work Typical Applications Ideal for trimming and bevelling plastic laminate edges

Trend T46/0 1/4" TC Trimming Cutter 9.5mm DIA

from £29.99 up to £35.99

Compare prices₆→

Trend T46/01 1/4" TC Trimming Cutter 12.7mm DIA

from £27.99 up to £34.95

Compare prices₆→

Trend T46/01 1/2" TC Bearing Guided Trimming Cutter 12.7mm

from £27.99 up to £34.95

Compare prices₅→

Trend T18S/CH6A 18V Fast Charger

from £39.99 up to £81.95

Compare prices₅→

The Trend T18S/CH6A charges fast to minimise downtime and increase productivity This is a one charger fits all solution - It takes all Trend T18S TXLI 18V Tool Connection Batteries. Tough durable casi more→ng with protective side vents keeps the internal electronics safe. Features: FAST CHARGING 2Ah: 32mins, 4Ah: 48mins, 5Ah: 54mins AIR COOLED Reduces heat build-up for more efficient faster charging LED CHARGE INDICATORS Easy read indicators show Charging and Full Charge states PROTECTIVE SIDE VENTS Prevents dust and debris ingress Specification: Charging Current: 6A Charge Time: 2Ah Battery - 32 mins Charge Time: 4Ah Slimline Battery - 48 mins Charge Time: 5Ah Battery - 54 mins

Trend SNAP/PC/38 Plug Cutter 3/8in TRESNAPPC38

16.99Buy!
£

Zoro.co.uk

Delivery: in United Kingdom

Report

Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.

Trend SNAP/D/SET Drill Set, 7 Piece TRESNAPDSET

from £34.99 up to £38.95

Compare prices₅→

Snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck. The HSS Drill Bits in this 7 piece set are gripped by a spring steel collet into th more→e hex shaft. The hex shanks snap into the Quick Chuck. Contents. 1.6 mm (1/16in) Drill. 2.4 mm (3/32in) Drill. 3.2 mm (1/8in) Drill. 4.0 mm (5/32in) Drill. 4.8 mm (3/16in) Drill. 5.6 mm (7/32in) Drill. 6.3 mm (1/4in) Drill. With collets.

Trend SNAP/CSTC/SET TCT Countersink Set, 5 Piece TRESNAPCSTCS

from £83.99 up to £91.95

Compare prices₅→

The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clear more→ing. They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains 1 x 2.0mm (5/64in) Drill and C/S Size No.4. 1 x 2.4mm (3/32in) Drill and C/S Size No.6. 1 x 2.8mm (7/64in) Drill and C/S Size. No.8. 1 x 3.2mm (1/8in) Drill and C/S Size. No.10. 1 x 3.6mm (9/64in) Drill and C/S Size. No.12. Tungsten carbide tipped version, these tools can be used in abrasive materials such as laminated chipboard. The …

Trend SNAP/CB/3TC TCT Tipped Counterbore 4.75 x 12.7mm TRESNAPCB3TC

from £24.99 up to £29.95

Compare prices₅→

Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Specifications D1 3/16 inch D1 4.75 mm D2 1/2 inch D2 12.7 mm Shank Diameter 1/4 inch.

Trend SL/C Professional 36mm Slotter 2.5mm Kerf, 1/4in Bore

from £29.99 up to £34.95

Compare prices₅→

Precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D. 36mm Kerf. 2.5mm No. of Teeth. 2

24 more item(s)