Routers & Trimmers Trend

soft start auto-adjustment fine height adjustment

Report

compare

vertical, 1010 W, up to 27000 rpm, stroke: 50 mm, soft start, fine height adjustment

Trend T4EK

from £85.00 up to £179.99

Trend C115 x 1/4 TCT 90 Bearing Guided Trimmer Cutter 9.5 x 12.7M

compare

case

vertical, 850 W, up to 32000 rpm, stroke: 35 mm

Trend T4ELK

from £59.99 up to £123.95

Compare prices₄→

compare

case

vertical, 760 W, up to 32000 rpm, stroke: 35 mm

29.99Buy!
£

Trend 3/8L x 1/4 TCT Two Flute Cutter 12.0mm x 19mm

Delivery: in United Kingdom

Report

C115 X 1/4 TCT 90? BEARING GUIDED TRIMMER CUTTER 9.5 X 12.7M

45.99Buy!
£

Trend Case/Dg Carry Case for Dg/Jig

Delivery: in United Kingdom

Report

3/8L X 1/4 TCT TWO FLUTE CUTTER 12.0MM X 19MM

22.99Buy!
£

Trend C220 x 1/4 TCT Intumescent Cutter 15 x 24mm TREC220

Delivery: in United Kingdom

Report

Trend CASE/DG Carry Case for DG/Jig The Trend CASE/DG is a Carry Case for the Drainer groove or Belfast Sink Jig. Both Jigs can be held in the bag at the same time. Features: Will accept both jigs at more→the same time Adjustable shoulder strap and carry handle Flap with hook & loop closer Accessory pouch for sub-bases Can also be used for the STAIR/A & STAIR/B Stair Jigs Specification: Width outside: 690 mm Height outside: 720 mm Accessory pocket: 190 mm x 190 mm

from £40.04 up to £42.95

Compare prices₆→

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth an more→d width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety & lsquoK&rsquo mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work. Trend C220 x 1/4 TCT Intumescent Cutter to suit 4mm thick strip of 15mm width. Specification Diameter 24mm Cutting Depth 15mm Bearing 16mm Shank 1/4in

Trend 46/22 1/2" TC Trimming Cutter 18mm DIA

from £83.99 up to £95.95

Trend GB160 Guide Bush 16mm DIA

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

22.99Buy!
£

Trend 46/140 x 1/2 TCT Bearing Guided Ovolo & Round over 9.5mm Rad

Delivery: in United Kingdom

Report

GB160 GUIDE BUSH 16MM DIA

79.99Buy!
£

Trend TR29 x 1/4 TCT Shank Mounted Bearing Guided Profiler 12.7 X

Delivery: in United Kingdom

Report

46/140 X 1/2 TCT BEARING GUIDED OVOLO & ROUND OVER 9.5MM RAD

42.99Buy!
£

Trend Trend DG/JIG Draining Groove Jig

Delivery: in United Kingdom

Report

TR29 X 1/4 TCT SHANK MOUNTED BEARING GUIDED PROFILER 12.7 X

176.17Buy!
£

Trend C008 x 1/4 TCT Two Flute Cutter 6.3 x 25.4mm TREC00814TC

Delivery: to United Kingdom

Report

This Draining groove jig is made from 12mm hardwearing CNC machined phenolic.

from £16.95 up to £17.99

Trend 3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm TRE32114HS

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating mi more→nimises heat and resin build-up for increased cutter performance and longevity. The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. The Trend C008 x 1/4 TCT Two Flute Cutter has the following specification Cutting Diameter 6.3mm (1/4in) Cutting Depth 25.4mm (1in) Overall Length 68.5mm …

from £18.95 up to £20.99

Trend 50/05 x 8mm HSSE Helical Plunge Bit 5mm

Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel, ground with a very fine edge. Generally HSS cutters are slightly less expensive than their TC grades, but can be more→more suitable for certain applications. Suitable for general grooving and rebating. Suitable for non abrasive materials, but will give a superior finish in soft timbers. Specification D 6.3mm (1/4in) C 28mm OL 59mm Shank Diameter 1/4in

30.99Buy!
£

Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0mm x 11mm

Delivery: in United Kingdom

Report

50/05 X 8MM HSSE HELICAL PLUNGE BIT 5MM

33.99Buy!
£

Trend Trend CDJ600/01 Dovetail Jig Template

Delivery: in United Kingdom

Report

3/01 X 1/4 TCT TWO FLUTE CUTTER 4.0MM X 11MM

96.34Buy!
£

Trend 46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm TRE4639012TC

Delivery: to United Kingdom

Report

Precision made laser cut zinc plated steel template comb for the CDJ600. Material thickness. 8 mm - 12 mm Material width up to 600 mm This product includes: 1 x Template comb 1 x 7.8mm Guide bush

from £110.95 up to £119.99

Trend 4/24 1/2" TC 2FL 16.0mm Straight Cutter

This Trend 46/390x1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is supplied as standard with ref BR/191 fitted. There are more→a variety of bearing rings available to give various rebate sizes. These rings are secured between the two bearings. D 50.8 mm C 22.5 mm B 12.7 mm E 19.1 mm E 15.9 mm OL 78 mm Specifications Shank Diameter 1/2 inch. Shank length 35 mm.

from £42.99 up to £79.99

Compare prices₆→

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend 46/80 x 1/4 TCT 90 Bearing Guided Triple Flute Cutter 12.7

45.99Buy!
£

Trend 24/80 x 1/4 TCT Plug Maker No.8

Delivery: in United Kingdom

Report

46/80 X 1/4 TCT 90? BEARING GUIDED TRIPLE FLUTE CUTTER 12.7

69.99Buy!
£

Trend Trend TEMP/LUC/57 57mm Uppercase Letter Templates

Delivery: in United Kingdom

Report

24/80 X 1/4 TCT PLUG MAKER NO.8

72.35Buy!
£

Trend Slotter Blade for 1/4 Bore Arbor 36mm 2mm 1/4" SL/B

Delivery: to United Kingdom

Report

Clear plastic letter templates for writing words for signs including house names. The templates are used with a 13mm guide bush and 8mm diameter cutter.

from £29.99 up to £34.95