Routers & Trimmers Trend

soft start auto-adjustment fine height adjustment

Report

compare

vertical, 1010 W, up to 27000 rpm, stroke: 50 mm, soft start, fine height adjustment

Trend T4EK

from £85.00 up to £179.99

Trend T46/01 x 1/4 TCT 90 Template Profiler 12.7 x 25mm

compare

case

vertical, 850 W, up to 32000 rpm, stroke: 35 mm

Trend T4ELK

from £59.99 up to £123.95

Compare prices₄→

compare

case

vertical, 760 W, up to 32000 rpm, stroke: 35 mm

39.99Buy!
£

Trend 3/6 x 1/2 TCT Two Flute Cutter 10.0 x 19mm TRE3612TC

Delivery: in United Kingdom

Report

T46/01 X 1/4 TCT 90? TEMPLATE PROFILER 12.7 X 25MM

from £25.99 up to £35.99

Trend 342 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm TRE34212TC

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

from £80.95 up to £89.99

Trend Set/SS9TC Starter Router Cutter Set of 15 1/2in Shank TCT

342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice more→of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly. T.C.T. 1/2in Shank.

89.99Buy!
£

Trend 46/91 x 1/4 TCT 90 Shank Mounted Template Profiler 12.7 x 9

Delivery: in United Kingdom

Report

SET/SS9TC STARTER ROUTER CUTTER SET OF 15 1/2IN SHANK TCT

49.99Buy!
£

Trend 2/2 x 1/4 TCT Single Flute Cutter 3.2 x 8.0MM

Delivery: in United Kingdom

Report

46/91 X 1/4 TCT 90? SHANK MOUNTED TEMPLATE PROFILER 12.7 X 9

29.99Buy!
£

Trend Large Step Ovolo Rounding Over Bearing Guided Router Cutter 48mm 22m

Delivery: in United Kingdom

Report

2/2 X 1/4 TCT SINGLE FLUTE CUTTER 3.2 X 8.0MM

from £82.99 up to £93.95

Trend 46/130 x 1/2 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius TRE4

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: more→48 • Cut Length Metric: 22 • Overall Length Metric: 68 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 15.9 • Radius 1 Imperial: 5/8

from £66.95 up to £69.99

Trend Trend TEMP/PD/R/D Panel Door Set Template

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing more→bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile. This Trend TCT Bearing Guided Ovolo & Round Over has the following specification Radius 6.3mm Diameter 25.4mm Cutter Height 13mm Shank 1/2in Bearings 9.5, 12.7mm

22.69Buy!
£

Trend AQ21/W/25 Aqua 21 Style White 25mm

Delivery: to United Kingdom

Report

Clear plastic 6mm template for use with a router and template profiling cutter to create a curved rail and panelled door. D 376 mm D2 310 mm C 102 mm R 264 mm Door width possible 470 to 510 mm

109.99Buy!
£

Trend 3/51 x 1/2 TCT Two Flute Cutter 9.5mm x 32mm

Delivery: in United Kingdom

Report

AQ21/W/25 AQUA 21 STYLE WHITE 25MM

37.99Buy!
£

Trend Door Stand 32mm - 55mm D/STAND/A TREDSTAND

Delivery: in United Kingdom

Report

3/51 X 1/2 TCT TWO FLUTE CUTTER 9.5MM X 32MM

from £56.88 up to £76.95

Trend 6200/8 5/8in Professional TCT Adjustable Drill and Countersink Set 3

The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door to more→be tilted back to assist fitting into the frame. Maximum door weight 50kg.

from £35.99 up to £40.99

Trend Trend Multi-Functional Table Top Router Jig

They are designed to drill and countersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for more→plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink.

150.66Buy!
£

Trend 3/08 12.7mm Professional TCT 2 Flute Straight Cutter with Plunge Cen

Delivery: to United Kingdom

Report

Multi-functional table top making jig. Create accurate precise MFT style worktops quickly with a plunge router. For router drilling 20mm holes at 96mm centres. Made from Compact Grade High Pressure more→Laminate 12mm thick. Two corner radii and 45 degree end cut. Edge guides for initial rows, index pins for indexing for subsequent holes. Recess aperture facility for desk tidy. Jig requires: A portable plunge router with 12.7mm (½") shank capacity and minimum 1300 watts. A template guide bush with 30mm outside diameter ref. GB30/A. A long series TCT plunge cut router cutter with 20mm diameter and 37mm cut length. Two clamps.

from £27.99 up to £44.99

Trend CB38-532 TCT CB Counterbore

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

55.99Buy!
£

Trend 4/30 x 1/2 TCT Two Flute Cutter 18.0mm x 50mm

Delivery: in United Kingdom

Report

CB38-532 TCT CB COUNTERBORE

81.99Buy!
£

Trend 3/24 6.0mm Professional TCT 2 Flute Straight Cutter 1/4" Shank

Delivery: in United Kingdom

Report

4/30 X 1/2 TCT TWO FLUTE CUTTER 18.0MM X 50MM

from £26.99 up to £31.95

Trend 46/82 x 1/2 TCT 90 Bearing Guided Triple Flute Cutter 12.7 x 38.1mm

from £79.99 up to £83.95

Trend Trend RTI/PLATE Router Table Insert Plate

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay. This trimmer has twin bearings for stability by increasing the bearing surface. more→An industrial profiling tool for longer runs of work when a clean finish is needed. T.C.T. 1/2in Shank A Angle = 90 . C = 38.1mm. D = 12.7mm.

75.23Buy!
£