Routers & Trimmers Trend

Two fute flush frimming fits with ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Features and Benefits Highly durable Tungsten Carbide construction Suitable for straight or shaped work Typical Applications Ideal for trimming and bevelling plastic laminate edges

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut The Trend TR47X1/2TC Roman Ogee features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials and give extra long life. Features:
- PTFE coated, indicated by distinctive black colouring
- Can be used on hardwood & softwood, fibreboard, plywood and particle board
- Etched dimensions on extra long 40mm shanks, for quick identification
- By raising the cutter, the top quirk is removed  Specification:
- D1:  25.4mm
- C:  5/8 Inch
- C:  15.9mm
- OL:  64mm
- B:  9.5mm
- R1:  4mm
- Shank Diameter:  1/2 Inch

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Allows a rounded recess in wood to be cut to a square recess with the use of a hammer. Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates. Spring loaded high speed steel (HSS) anvil for a sharp cut and long life. Light weight aluminium body design. Can be used with the Trend Hinge Jig. Can be resharpened.

50/14 10mm HSSE Helical Plunge Router Cutter by Trend

Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.