Routers & Trimmers Trend

Delivery: in United Kingdom

Report

Trend Snap/Hd/Set Drill Set 7 Piece

SNAP/HD/SET DRILL SET 7 PIECE

£16.99

Delivery: in United Kingdom

Report

Trend C078 x 1/4 TC Round Over Two Flute Cutter 9.5 x 15.9mm TREC07814TC

The Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curved edges. With two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. A PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers, 'K' marked to ensure safe working practices. Supplied with two bearings for Round Over or Quirked Ovolo moulding for additional options for fine detailing on boxes and model making work.

from £39.99 up to £52.95

Compare prices and buy Trend C078 x 1/4 TC Round Over Two Flute Cutter 9.5 x 15.9mm TREC07814TC

Zoro.co.uk (United Kingdom) →	£40.00
Travisperkins.co.uk (United Kingdom) →	£45.00
Zoro.co.uk (United Kingdom) →	£50.00
Mytoolshed.co.uk (United Kingdom) →	£53.00
Tooled-up.com →	£53.00

Compare prices₅→

Trend 3/7 11.0mm Professional TCT 2 Flute Straight Cutter with Plunge Cent

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

from £35.99 up to £37.95

Compare prices and buy Trend 3/7 11.0mm Professional TCT 2 Flute Straight Cutter with Plunge Cent

Zoro.co.uk (United Kingdom) →	£36.00
Mytoolshed.co.uk (United Kingdom) →	£38.00
Tooled-up.com →	£38.00

Trend Grab/SE1/Set Grabit Remover Set

GRAB/SE1/SET GRABIT REMOVER SET

£27.99

Delivery: in United Kingdom

Report

Trend 46/360 x 1/2 TCT Bearing Guided Chamfer 45 35.1 x 12mm

46/360 X 1/2 TCT BEARING GUIDED CHAMFER 45? 35.1 X 12MM

£109.99

Delivery: in United Kingdom

Report

T-SQUARE

Delivery: in United Kingdom

Report

Trend 3/05 3.0mm Professional TCT 2 Flute Straight Cutter 1/4" Shank

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

from £22.99 up to £27.95

Compare prices and buy Trend 3/05 3.0mm Professional TCT 2 Flute Straight Cutter 1/4" Shank

Zoro.co.uk (United Kingdom) →	£23.00
Mytoolshed.co.uk (United Kingdom) →	£28.00
Tooled-up.com →	£28.00

Trend Trend 650mm Worktop Jig

Tradesman work top jig for up to 650mm worktops. Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius peninsular joint, 35mm kitchen door hole. Fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Two open ended bolt recesses (dog bone style) for 150mm bolts. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Pins made from ABS plastic for strength. Jig requires: A portable plunge router

£112.98

MachineMart.co.uk

Delivery: to United Kingdom

Report

Trend 3/10 1/4" TC 2FL 3.2mm Straight Cutter

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

from £22.99 up to £30.99

Compare prices and buy Trend 3/10 1/4" TC 2FL 3.2mm Straight Cutter

Zoro.co.uk (United Kingdom) →	£23.00
Mytoolshed.co.uk (United Kingdom) →	£28.00
Tooled-up.com →	£28.00
Zoro.co.uk (United Kingdom) →	£31.00

Compare prices₄→

Trend CraftPro Credit Card Sharpening Stone

CRAFTPRO CREDIT CARD SHARPENING STONE

£22.99

Delivery: in United Kingdom

Report

Trend 4/29 x 1/4 TCT Two Flute Cutter 18.0mm x 25mm

4/29 X 1/4 TCT TWO FLUTE CUTTER 18.0MM X 25MM

£59.99

Delivery: in United Kingdom

Report

Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter

T421/35 X 1/4 TCT HINGE SINKING BIT 35MM DIAMETER

£43.99

Delivery: in United Kingdom

Report

Trend 4/2 x 1/2 TCT Two Flute Cutter 16.0 x 19mm TRE4212TC

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 4/2 x 1/2 TCT Two Flute Cutter has the following specification D 16mm (5/8in) C 19mm OL 60mm Shank Diameter 1/2in

from £42.99 up to £43.95

Compare prices and buy Trend 4/2 x 1/2 TCT Two Flute Cutter 16.0 x 19mm TRE4212TC

Zoro.co.uk (United Kingdom) →	£43.00
Mytoolshed.co.uk (United Kingdom) →	£44.00
Tooled-up.com →	£44.00

Trend 4/07 22.2mm Professional TCT 2 Flute Straight Cutter with Plunge Cen

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

from £39.99 up to £44.95

Compare prices and buy Trend 4/07 22.2mm Professional TCT 2 Flute Straight Cutter with Plunge Cen

Zoro.co.uk (United Kingdom) →	£40.00
Mytoolshed.co.uk (United Kingdom) →	£45.00
Tooled-up.com →	£45.00

Trend S3/22 x 1/4 Solid Two Flute Cutter 6.3mm x 25mm

S3/22 X 1/4 SOLID TWO FLUTE CUTTER 6.3MM X 25MM

£49.99

Delivery: in United Kingdom

Report

Trend 4/8 x 1/2 TCT Two Flute Cutter 25.4mm x 25mm

4/8 X 1/2 TCT TWO FLUTE CUTTER 25.4MM X 25MM

£69.99

Delivery: in United Kingdom

Report

Trend 12/5 x 1/4 TCT Radius Cutter 5.0mm Radius

12/5 X 1/4 TCT RADIUS CUTTER 5.0MM RADIUS

£49.99

Delivery: in United Kingdom

Report

Trend 1/2" Starter Cutter Set 15 Piece

15 Pce cutter set, containing a range of popular cutters. Suitable for grooving, profiling and moulding. Use on softwoods, hardwoods, MDF and plywood. Supplied in a plastic carry case.

from £79.99 up to £82.95

Compare prices and buy Trend 1/2" Starter Cutter Set 15 Piece

Zoro.co.uk (United Kingdom) →	£80.00
Mytoolshed.co.uk (United Kingdom) →	£83.00
Tooled-up.com →	£83.00

Trend 46/140 1/2" TC Bearing Guided O Volo Cutter 9.5mm Rad

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

from £59.99 up to £70.99

Compare prices and buy Trend 46/140 1/2" TC Bearing Guided O Volo Cutter 9.5mm Rad

Zoro.co.uk (United Kingdom) →	£60.00
Mytoolshed.co.uk (United Kingdom) →	£69.00
Tooled-up.com →	£69.00
Zoro.co.uk (United Kingdom) →	£71.00

Compare prices₄→

Trend Trend TEMP/LUC/57 57mm Uppercase Letter Templates

Clear plastic letter templates for writing words for signs including house names. The templates are used with a 13mm guide bush and 8mm diameter cutter.

£72.35

MachineMart.co.uk

Delivery: to United Kingdom

Report

Trend Bsc/20/1000 Biscuits

BSC/20/1000 BISCUITS

£59.99

Delivery: in United Kingdom

Report

Trend 3/5 x 1/4 TCT Two Flute Cutter 9.0mm x 19mm

3/5 X 1/4 TCT TWO FLUTE CUTTER 9.0MM X 19MM

£39.99

Delivery: in United Kingdom

Report

Trend 4/12 1/2" TC 2FL 38.0mm Straight Cutter

4/12 1/2" TC 2FL 38.0mm Straight Cutter by Trend

£72.99

Delivery: in United Kingdom

Report