Routers & Trimmers Trend

9/74 X 1/2 TCT BEARING GUIDED CORNER BEAD CUTTER 9.5 RADIUS

3/3 X 1/4 TCT TWO FLUTE CUTTER 7.0MM X 19MM

Made from solid laminate provides an instant means of squaring off, marking out, setting up jigs etc. Overall length 703 mm Blade length 645 mm Blade thickness 3 mm Blade width at butt 70 mm Blade width at end 42 mm Butt length 280 mm Butt thickness 8 mm Butt width 58 mm Butt length from guiding edge 140 mm Square tolerance 1mm per metre

C130 X 1/4 TCT BEARING GUIDED CORNER BEAD 4.8MM RADIUS

3/84L X 1/2 TCT TWO FLUTE POCKET CUTTER 12.7MM

SNAP/DBG/5 CENTRING GUIDE 5/64IN DRILL

KWJ/PIN/4 10MM PIN PACK (4 PIECE)

46/22 X 1/2 TCT 90? TEMPLATE PROFILER 18.2 X 50MM

10/11 X 1/2 TCT V GROOVE CHAMFER 45 19.0 X 38MM

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately. Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG). An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Kit includes 1 x Guide bush collar 2 x Face plate template 1 x Mortise template 1 x Template adapter 6 x Spacer

CRAFTPRO FOLDING SHARPENING STONE

4/5 X 1/2 TCT TWO FLUTE CUTTER 19.0MM X 25MM

T46/1 X 1/4 TCT 90? TEMPLATE PROFILER 15.9 X 13MM