Routers & Trimmers Trend

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Specifications D1 3/16 inch D1 4.75 mm D2 1/2 inch D2 12.7 mm Shank Diameter 1/4 inch.

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. *6mm shank.

Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

Precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D. 36mm Kerf. 2.5mm No. of Teeth. 2

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. The Trend 3/83M x 1/2 TCT Two Flute Cutter has a short shank, suitable for Makita 3600B & 3612BR, Ryobi and Hitachi routers. Ideal for cutting kitchen worktops. It has the following specification Cutting Diameter 12.7mm Cutting Depth 50.0mm Overall Length 84mm Shank Diameter 1/2in

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.

Trend 3/20X1/4TC TCT Two Flute Router Cutter 6.3mm x 16mm The Trend 3/20X1/4TC TCT router cutters are perfect for use on abrasive materials such as chipboard, MDF & plywood. The two flutes give a clean finish to cut edges and the tungsten carbide tips ensure long life and maximum durability. Features:
- Designed for the most abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics
- Two flutes give a clean finish to cut edges
- For routing and profiling natural timbers and man-made boards
- Suitable for most makes of router Specification:
- D: 1/4 inch
- D: 6.3 mm
- C: 16 mm
- OL: 47 mm
- Shank Diameter: 1/4 inch…