Routers & Trimmers Trend

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 16 • Overall Length Metric: 69

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T. 1/2in Shank. A = 45 C1 = 12 mm C2 = 16 mm D = 35.1mm B = 12.7 mm

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter.

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length Metric: 25 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Bottom Cut Feature.

TCT Two flute cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Features and Benefits: Two flutes give a clean finish to cut edges TCT plunge centre tip

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base 
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Diameter 12.7mm. Cutting length 19mm. Shank 1/4in.

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.