Routers & Trimmers Trend

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Bottom Cut Feature.

For veining, panelling, 'V' grooving, bevelling & chamfering.

Allows a rounded recess in wood to be cut to a square recess with the use of a hammer. Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates. Spring loaded high speed steel (HSS) anvil for a sharp cut and long life. Light weight aluminium body design. Can be used with the Trend Hinge Jig. Can be resharpened.

Tungsten Carbide Tipped Circular saw-blades designed for a professional finish. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. High grade alloy steel plate body precision ground to maintain flatness. Micro-granular Tungsten Carbide Tipped to allow cutting of abrasive materials.

Trend FAST TRACK Replacement Stones are made from monocrystalline diamond with a unique diamond cross relief pattern for optimal abrasion rates. This helps to maximise sharpening efficiency and reduce clogging. Diamonds are held by nickel plating to a steel substrate, with ABS plastic base. This Trend FTS/S/R FAST TRACK Replacement Stone has the following specification Grade Extra Extra Coarse Grit 100 (nom. 60 micron) Dimensions 75 x 24 x 4mm Colour Grey

Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel, ground with a very fine edge. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Suitable for non abrasive materials, but will give a superior finish in soft timbers. Specification D 6.3mm (1/4in) C 28mm OL 59mm Shank Diameter 1/4in

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 6.35mm cutting depth bearing guided trimmer for flush trimming of laminate and veneer work. Extra long shank allows the cutter to trim laminate and veneer on the underside of the workpiece. Also to form shallow rebates and slots with a template or guide. Double shank mounted bearings for increased surface contact for additional stability and control. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Double bearings for stability. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: …

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. *6mm shank.

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. *6mm shank.

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. The Trend C024 x 1/4 TCT Two Flute Cutter has the following specification Cutting Diameter 15mm (19/32in) Cutting Depth 25mm (63/64in) Overall Length 65.5mm …

Used for trimming plastic or plywood overlays, also for trimming plastic or plywood overlays.

The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to follow more intricate curves. 25.4mm cutting depth for replication of thin components with templates. Fitted with a bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety & lsquoK&rsquo mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.