Grinders & Polishers

Powerful induction motor supports 1" mortice facility. Back, forth and lateral table movement allows for easy positioning of larger workpieces. Fully adjustable work clamps and depth stops allow for accurate morticing. Supplied with 5/8" chisel and bit, 19mm, 13/16" and 13/16" chisel bushes, 16mm chuck and key, work clamp, 2M(approx.) cable and approved plug. Display packed on pallet.No-volt switch

The all-rounder for sanding work on walls and ceilings

400v 3 Phase 75mm Belt width Belt speed 30 mtr/sec

DESCRIPTION180mm, high endurance vertical type concrete grinder with excellent dust control.Anti-vibration mountings for maximum operator comfort1700W motorVariable speed for different applicationsConstant speed electronics for an even finishWith electronic overload and thermal protectionAdjustable ergonomic front handle allows clearance for edge grindingLock-On Hall Effect switch is completely waterproof and dustproof. Includes anti-restart function to protect operator in the event of interrupted power supplyRobust 2200W universal motor with constant speed electronics for an even finishTool-free sliding cover for edge grindingHalf-Moon Door for grinding up to the edgeDust skirt with spring

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Includes 51148 Backing Pad, 4-1/2" (114 mm) diameter, plus mounting hardware. Accepts optional 4-1/2" (114 mm) diameter Abrasive Discs with 7/8" (22 mm) center hole. Dynabrade s 1.3 hp (970 W) Right Angle Sander offer countless grinding and material removal solutions to industries such as metal/stainless steel fabrication, composites, masonry, ironwork and general welding. Designed to the Dynabrade standard of excellence, these tools offer a wide array of features to increase efficiency and maximize operator comfort!Vibration Dampening Side Handle Specially designed to reduce vibration transfer to operator. Removable for left or right hand use. Rotational Exhaust System Rotates a full 360 degree …

Includes 51150 Backing Pad, 5" (127 mm) diameter, plus mounting hardware. Accepts optional 5" (127 mm) diameter Abrasive Discs with 7/8" (22 mm) center hole. Dynabrade's 1.3 hp (970 W) Right Angle Sander offer countless grinding and material removal solutions to industries such as metal/stainless steel fabrication, composites, masonry, ironwork and general welding. Designed to the Dynabrade standard of excellence, these tools offer a wide array of features to increase efficiency and maximize operator comfort!Vibration Dampening Side Handle Specially designed to reduce vibration transfer to operator. Removable for left or right hand use. Rotational Exhaust System Rotates a full 360 degree to …

Includes 1/4" Collet Insert (50013), fits optional 1/8" (50065), 3/8" (50014), 6 mm (50016), 8 mm (50039) Extended rear exhaust muffler design.

Petrol Stump GrinderThe HYSG150-2 is an extremely powerful stump grinder from Hyundai, powered by a 420 cc / 14hp 4 stroke Hyundai engine the HYSG150-2 is capable of removing the toughest and most awkward tree stumps efficiently, safely and increases productivity.Off Road TyresWeighing 110kg, the HYSG150-2 is easy to maneuver due to its large adjustable handle bars and heavy duty pneumatic tyres that keeps the machine elevated over wood chips during operation.Clear Tough Tree Stumps FasterBuilt to make tough tree stump clearing faster and less demanding the HYSG150-2 can remove any sized tree stump of any diameter that are up to 56cm high (above ground) down to 33cm below ground. Fitted with

The drive is equipped with a collet tool mounting for mounted tools. The exhaust air flow of the air grinder is at the back. The air grinder may only be used with oil. 1 m exhaust hose and 2.5 m air supply hose with 1/4" male threaded connection and threaded quick coupling (STGI), 6 mm collet, 2 keys. Thanks to its extended design, the drive is ideal for working in hard-to-reach areas.

The drive is equipped with a collet tool mounting for mounted tools. The exhaust air flow of the air grinder is at the back. The air grinder may only be used with oil. 1 m exhaust hose and 2.5 m air supply hose with 1/4" male threaded connection and threaded quick coupling (STGI), 6 mm collet, 2 keys. Thanks to its medium-length design, the drive is ideal for use when access is restricted.

The drive is equipped with a collet tool mounting for mounted tools. The exhaust air flow of the air grinder is at the back. Due to the lever valve, the drive has a dead man's switch. 1 m exhaust hose and 2.5 m air supply hose with 1/4" male threaded connection and threaded quick coupling (STGI), 6 mm collet, 2 keys. Thanks to its extended design, the drive is ideal for working in hard-to-reach areas.

The drive is equipped with a collet tool mounting for mounted tools. The exhaust air flow of the air grinder is at the back. Due to the lever valve, the drive has a dead man's switch. 1 m exhaust hose and 2.5 m air supply hose with 1/4" male threaded connection and threaded quick coupling (STGI), 6 mm collet, 2 keys. Thanks to its medium-length design, the drive is ideal for use when access is restricted.

The drive is equipped with a collet tool mounting for mounted tools. The exhaust air flow of the air grinder is at the back. The air grinder has to be used with oil. Due to the lever valve, the drive has a dead man's switch. Thanks to its extended design, the drive is ideal for working in hard-to-reach areas. 1 m exhaust hose and 2.5 m air supply hose with 1/4" male threaded connection and threaded quick coupling (STGI), 6 mm collet, 2 keys.

The drive is equipped with a collet tool mounting for mounted tools. The exhaust air flow of the air grinder is at the back. The air grinder has to be used with oil. Due to the lever valve, the drive has a dead man's switch. Thanks to its medium-length design, the drive is ideal for use when access is restricted. 1 m exhaust hose and 2.5 m air supply hose with 1/4" male threaded connection and threaded quick coupling (STGI), 6 mm collet, 2 keys.

Victor Lynx 15" High Speed Burnisher Machine Code: VR-L15 The Lynx operates at 1080 rpm to give excellent productivity in spray cleaning or burnishing and a superior finish on the floor. Simple to use - requires minimal operator training. Fold over handle for easy, compact storage.

The SIP 3" Belt Linisher easily polishes and removes excess material using a tilting system to accommodate a variety of material lengths and sizes, plus accurate positioning via easy angle adjustment for excellent finishing and even surfaces on linished workpieces. Designed for trade and professional applications. KEY FEATURES 3-point belt access for a variety of linishing applications Head tilt accommodates a range of different material lengths and sizes Long-lasting zirconium bonded belt for metals including stainless steel Adjustable tool support and angles for accurate workpiece positioning Quick release belt handle for easy access and belt changes Belt tracking adjusting knob

Brushless motor allows for better run time and durability, and eliminates the need to change brushes Telescoping shaft allows easy access to tight spaces and hard-to-reach areas Cordless tool control allows for wireless on/off capability when paired with a compatible dust extractor Fast, secure and tool-free connection to DeWalt dust extractors via AirLock Variable speed dial to help match speed with app

Technical data: Weight: 3.8 kg - Number of idle revolutions: 3000-7700 min1. Tool holder: D25/M14 - Power: 1600 W.

Wall Sanding Design - Helps sand mud and plasters on ceiling or wall faster and easier. ULTRA FLEXIBLE HEAD - Reduces the risk of surface damage, and helps allow for more effortless movement across surfaces. Ceiling suction mode: helps reduce the weight of the herrienta while working overhead, reduce the head, reduce tension and reduce fatigue. Handle Grip T: provided a better, more adaptable grip to help reduce arm strain, especially above the head QUICK RELEASE EXTENSION BAR: Adapts the length of the sander when cbiar from ceilings to walls, and rer extension eliminates excess weight. Easy-to-reach controls: The power switch, RPM and airflow controls can be adjusted without removing your …

The all-rounder for sanding work on walls and ceilings

Die Grinder / 18 V / Disc Diameter 225 mm / 5,850 rpm Idle Speed (max.)