Drill Bits Wera

The Wera 8755/67-9/IMP DC Bit-Check Pozi / TORX 9 Piece Set has an Impaktor holder with retaining ring magnet in the chuck for a secure fit of the bits in the holder and 9 25mm long Impaktor bits. The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers. Holder equipped with a ring magnet to easily hold longer and heavier screws, also ideal for above-head work. The rough diamond coating of the bits reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. …

High quality stepped drill bit by Wera. 9 drill steps increasing by 2 mm for material with a maximum thickness of 4.5 mm. Comes with edge breaker for 1 mm sheet metal. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • 9 drill steps increasing by 2 mm • For material with a maximum thickness of 4.5 mm • With edge breaker (sheet metal deburrer) at diameter 10 • For 1 mm sheet metal • 1/4" hexagon suitable for holders as per DIN ISO 1173-D 6.3 Contents: 843 Stepped drill bits, 4-20 mm, 75 mm

18-piece wood twist drill bit and bit set. High quality, metal twist drill bits for precise, splinter-free drilling in soft wood, hard wood and laminated panel material. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for great durability. Very good concentricity. The hexagonal shaft ensures very good power transfer. The Rapidaptor universal holder ensures rapid bit change without any extra tools. Drive: ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits: • Ideal for mobile repair and assembly work • Rapidaptor holder for rapid bit change • 1/4" drive suitable for power screwdrivers • Rapidaptor u…

The Wera Bit-Check 30 Diamond 1, with Rapidaptor is designed for compact and organised tool storage. Utilising a unique combination of special material, hardening and precision manufacture, Bi-Torsion bits are designed to prevent premature wear and dramatically extend service life. The patented Torsion zone absorbs peak stress loads that normally destroy bits. The holder with quick-release chuck offers press-in auto-lock and rapid one-handed bit changes for insert and power bits. Its spin sleeve allows the steadying of the screwdriving. BiTorsion Diamond Coated (BDC) bits ensure safe working, especially driving screws into delicate materials or high-quality surfaces, preventing slip. Additionally,…

The Wera 32 Piece Kraftform Kompact 71 Set is highly versatile and portable. It comes with Kraftform multi component handle, that is comfortable to use. It also has a non-roll feature meaning it will not slip in hand and a Rapidaptor quick-release chuck for effortless bit change. Contains 1 x 816 R Bitholding Screwdriver with Rapidaptor Quick-Release Chuck. 1 x 1/4in 889/4/1 K Rapidaptor Universal Bit Holder. 9 x 25mm TORX BO (pinned) Bits TX7, TX8, TX9, TX10, TX15, TX20, TX25, TX30, TX40. 6 x 25mm Hex-Plus BO (pinned) Bits 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm. 4 x 25mm Square-Plus Bits #0, #1, #2, #3. 4 x 25mm Torq-Set Bits 6mm, 8mm, 10mm, 1/4in. 3 x 25mm Tri-Wing Bits 1, 2, 3. 4 x 25mm …

The Wera Bit-Safe 61 BiTorsion 1 is a comprehensive set of Torsion bits and a Rapidaptor holder set supplied in a pouch. It is designed for users on the move needing a broad selection of drive profiles with multiples of the same bit. Utilising a unique combination of special material, hardening and precision manufacture, Bi-Torsion bits are designed to prevent premature wear and dramatically extend service life. Their patented Torsion zone absorbs peak stress loads that normally destroy bits. Diamond Coated (BDC) bits ensure safe working, especially driving screws into delicate materials or high-quality surfaces, preventing slip. Additionally, where screws are driven into resistant materials …

The Wera Joker Combination Wrench has a unique jaw design with double-hex technology. It has an integrated metal plate in its jaw for practical holding function, and limit stop to prevent slipping from the bolt head. The plate is serrated for high torque. It has a reverse travel angle of only 30 and the ratchet mechanism has 80 teeth for use in confined spaces. Made from high-quality chrome molybdenum steel and nickel-chrome plated. Contents: 020012: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4in 073295: 7/16, 1/2, 9/16, 3/4in This Wera Joker Ratcheting Combination Spanner Set is supplied in a clam pack. Contains the following sizes: 7/16in x 165mm, 1/2in x 177mm, 9/16in x 188mm and 3/4in x 246mm…

Wera Torsion Extra Tough (TZ) Phillips bits are hard wearing, with long service life. Ideal for metal, hard joining applications and threaded fasteners. Use with Wera BiTorsion Rapidaptor for extended service life. Card of 2 x Phillips PH2.

High quality bits out of stainless steel for hexagon socket screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • For socket head screws • Stainless Steel Bits • Solution to the extraneous r…

High quality bits for Phillips screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • For Phillips screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase in service life • Diamond coating for a secure fit in the s…

Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Features and Benefits: • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase i…

The Wera manual and machine socket wrench insert (ISO 2725 part 3) can be used in manual and machine operations. With "Take it easy" tool finder with colour coding by size - for quick and easy identification of the required tool . Slip-proof for easy grip even with oily hands. With ball stop groove. For external hexagon screws and bolts. Made of dull-chromed chrome-vanadium. Features and Benefits: • 3/8" Zyklop socket • For manual and power tool operations (non-impact) • Knurling at lower end to enable easy gripping when used in manual applications • Equipped with ball stop groove • With Take it easy tool finder: colour coding by size Contents: 8790 HMB Zyklop 3/8" …

Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. The strong permanent magnet holds the bits firmly. 1/4" hexagonal, suitable for screwdriver machines with mounting as per DIN ISO 1173-F 6.3. Features and Benefits: • Rapidaptor technology for rapid bit change • Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive • 1/4" hexagon drive Contents: 889/4/1 Rapidaptor Universal Bit Holder, 1/4" x 75 mm

Rapidaptor BiTorsion Universal Bit Holder with Strong Permanent Magnet and Quick-Release Chuck fits for bits Wera Series 1 and 4. Capacity 1/4Inch. Hexagon Drive 1/4Inch. Length 75mm.

High quality bits for recessed TORX® screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • For recessed TORX® screws • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out • 1/4" hex…

Bit-Set