United Kingdom
Catalog   /   Sports & Outdoor   /   Swim & Water Sports   /   Diving Accessories

Diving Accessories XS Scuba

 prices on 33 models  
XS Scuba
clear
Show
14.49Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Attach one end to a first stage low pressure port.The other end allows the attachment of a industrial style hose with 1/4 NPT female threads.3/8-24 male to 1/4 male NPT.Brass construction with black c more→hrome finish.Low pressure only - below 200 psi.
15.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Same design as Single Weight Pocket above, except:- Allows pocket to be quickly added without having to slide over the end of webbing.- Quick attachment with double Velcro® closure at bottom of pocke more→t.Designed to add up to 5 pounds of shot or hard weight.Easy addition to XS Scuba ponypac or other harness systems.Perfect for adjusting your trim.
16.49Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Rear Tail Ballast Pocket 2,7 kg.The XS Scuba Tail weight bag (2.7 kg) is designed to screw onto the lower end of the backplate to optimise the diver´s fit.Weight: holds up to 2.7 kg.
17.49Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features:- Included with Mini Tech Gauge Kit- Use to mount a Mini Tech Gauge to HP hose- Inline (180º) with the HP hose- Airspool with Viton o-rings included
17.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Connector that directly fits the 1st stage outlet ports. This enables you to connect a LP hose in an ideal way that would not be possible without this rotatable adapter!
17.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Elbow Adapter 70 second Stage.
17.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Elbow Adapter 90 second Stage.
17.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
LP Hose Splitter AC918 - Attach to the second stage end of one low pressure regulator hose - Allows the attachment of two low pressure regulator hoses (first stage ends) - One 9/16-18 male inlet to t more→wo 3/8-24 female outlets - Chromed brass construction - Low pressure only - below 200 psi
19.49Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Add trim weight in the center groove of your backplateAttach with twin cylinder band bolts11inch/28cm center to centerSealed opening with double VelcroJust pour in your lead shot of up to 5 lbs./2,2kg
19.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features:- Velcro release weight dump - pull out, then down- Designed to add up to 5 lbs. of bagged shot or hard weight - Attaches by sliding over the end of any 2 webbing - Easy addition to XS Scuba more→weight belt or other harness systems- Perfect for adjusting your trim
20.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Precision machined from 316L stainless steel.Protects 200 and 300 bar DIN threads.Seals water out with Viton o-ring for oxygen compatibility.No groove through threads.
21.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
ADAPTER 90 DEGREE 1ST STAGE LP SWIVEL 3-8.Adapter 90 degree for LP port of 1 stage, with swivel, UNF 3-8, chromed brass.
21.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Male quick-disconnect only of AC990, Allows attachment of multiple second stages to a single hose, Chromed brass construction, Low pressure only - below 200 psi, Factory cleaned - Viton o-ring.,.
28.49Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features:- Converting your regulator/hoses to 1/4 NPT has many practical application in diving as well as your garage or shop- Used with surface supplied umbilicals, switch blocks, comm gear and pneum more→atic tools- Viton o-rings where applicable- 1/4 NPT male to 3/8-24 UNF female- Stainless steel construction
29.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features:Convert any standard regulator hose to a BC quick disconnect hoseInstalls on the second stage end of a regulator hoseSix point attachment with six ball-bearings´EZ´ QD design, just push to at more→tach - no need to pull back the collarWide easy grip collarA favorite for drysuit inflation hosesChromed brass constructionLow pressure use only - below 200 psiFactory cleaned - Viton o-rings
30.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features: - Converting your regulator/hoses to 1/4 NPT has many practical application in diving as well as your garage or shop- Used with surface supplied umbilicals, switch blocks, comm gear and pneu more→matic tools- Viton o-rings where applicable- 1/4 NPT male to 9/16-18 male- Stainless steel construction
32.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features:Install between standard regulator hose and second stage9/16-18 UNF male inlet to 9/16-18 UNF female outlet threadsSlide machined Delrin collar to shut off gas flowPrevent critical gas lossCo more→mmonly used with deco rigs, stage bottles & drysuit inflationLow pressure use only - below 200 psi
33.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features: - Make any primary regulator more comfortable while diving - Routes the hose under the right arm instead of over the shoulder - Often used on octopus to improve hose routing - Installs betwe more→en the second stage and the regulator hose - Chromed brass construction - Low pressure use only - below 200 psi - Factory cleaned - Viton o-rings
34.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Make any primary regulator more comfortable while diving.Routes the hose under the right arm instead of over the shoulder.Often used on octopus to improve hose routing.Installs between the second stag more→e and the regulator hose.Chromed brass construction.Usable up to 40% oxygen.Choose the pefect angle between 0° and 350° by simply twisting the adapter!.
36.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Make any primary regulator more comfortable while diving.Routes the hose under the right arm instead of over the shoulder.Often used on octopus to improve hose routing.Installs between the second stag more→e and the regulator hose.Chromed brass construction.Low pressure use only - below 200 psi.Factory cleaned - Viton o-rings.
36.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features: - Install between first stage medium pressure port and standard regulator hose.- Slide machined Delrin collar to shut off gas flow.- Commonly used with rebreather systems.Specifications: - 3 more→/8-24 UNF male inlet to 3/8-24 UNF female outlet threads.- Low pressure use only - below 200 psi.
37.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Carabiner Adapter second Stage 1/3 Ports.
37.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features: - Use this to route your HP hose 90º- Chromed brass construction with Viton o-rings- High pressure only – maximum 5000 psi- Cleaned for use with up to 40% pre-blended Nitrox- (1) 7/16-20 mal more→e inlet to (1) 7/16-20 female outlet
42.99Buy!
£
Diveinn
Delivery: in United Kingdom
Report
Features:Convert any standard regulator hose to fit a Poseidon X-Stream second stageFits any Poseidon second stage with M31-1.5mm inlet threadsBrass construction with black chrome finishDoes not have more→a built-in relief valveLow pressure use only - below 200 psi
9 more item(s)
Pages:
1 2
Filters
Price
from£ up to£ 
Brands
Clear parameters