Diving Accessories XS Scuba

Features:- Fits over wetsuit of drysuit - Advanced bike shorts pattern - 2mm super-stretch neoprene - black - Durable flat-lock seams - Nylon cord draw string to prevent slipping - Two Tech Thigh Pockets.

Stainless steel construction.Valve DIN insert 1/4´´ hex wrench.Port plugs 3/16´´ hex wrench.Valve dip tube 5/32´´ hex wrench.Valve nut slotted screwdriver.Phillips screwdriver.Inflator schrader valve tool.O-ring pick.Orifice adjustment flat screwdriver.

Features:Add a quick-disconnect to most any regulator or full face maskInstalls between low pressure regulator hose and second stageLock-down screw to prevent accidental disconnectionChromed brass constructionLow pressure use only - below 200 psiFactory cleaned - Viton o-ring

First Stage Quick DisconnectQuick and convenient way to change hose lengths between divesInstalls between 1st stage and LP regulator hoseLock-down screw to prevent accidental disconnectionFlow rate = 800 lpmLow-pressure use only – below 200 psiFirst Stage Quick Disconnect – Male OnlyInstall on multiple LP regulator hoses for quick swaps

Features:- Bright, white face - easy to read- Ready to mount directly to a HP port of first stage- Ready to mount directly to a HP hose- Inline adapter and airspool included- Airspool with Viton o-rings- Viton gauge o-ring- Luminescent gauge face- Wide 210º sweep- Attractive clamshell packaging

- Add an additional high pressure port to your regulator´s first stage.- Additional port allows for 360º swivel.- One 7/16-20 male to two 7/16-20 female outlets (common HP port).- Chromed brass construction.- High pressure use - Maximum 5000 psi / 340 bar.- Factory cleaned - Viton o-rings.

Add to any pressure gauge, console or air integrated console which uses a standard high pressure hose Remove your gauges for safe storage Bayonet mount style quick-connect (push and turn) Gauge attachment end has 7/16-20 female threads Hose attachment end has 7/16-20 male threads Airspool with iton o-rings included Brass construction with black Chrome finish.

HUGE, 7ft long (210cm) x 22ft (55cm) circumference (6ft (180cm) out of the water).Mil-Spec, urethane-backed, nylon material.SOLAS reflective tape on both sides for maximum visibility.Elastic loop at top for chem light attachment.SS D-ring at top for slate attachment.Overpressure relief valve with pull for manual release.One way oral inflation valve w- cap cover.Anti-Spill bottom with baffle to allow easy fill from any device and remains inflated until you empty it.Rolls up to compact size and stays closed with velcro strap.Lifting strap with stainless steel D-ring at bottom.50 lbs.of lift capacity.

Easy Mounting of the Pony Cylinder:- Mount on the diver's right or left side- Mount upright or upside-down- Secure and stable attachment- Easy attachment with stainless steel cam buckle- No hose clampsEasy Attachment to the Primary Cylinder:- Uses your BC cam strap for attachment- Rubber bumpers to protect your cylinder's paint and finishFeatures:- Designed for 7.25 in (184 mm) diameter primary cylinders- Rubber bumpers to protect paint- 316 grade stainless steel construction- Adjustable length nylon webbing- Roller wheels make it easier to cam over the buckle and provide protection to the cylinder paint- Stainless steel cam buckle- The band can be rotated in the bracket so that the buckle